roman.tatar

Playalaguna has to be the ultimate winner! She has 4 elements inside 

I cannot find the printable version. Can you point me to PDF? - I want to print it and have off-line battle in our office :-)

Sure, send me PM and I will look at it :-)

Ok, now I understeand. UnDPs don't have any hierarchical structure. Each UnDP is simple poller for one OID. - Good solution is to put them into Groups as you already find out. - You can also use groups in Univesal Device Poller application to organize UnDPs. (Right click on the UnDP - Edit - See Group in the bottom - Type…

Hi, the macro ${CurrentValue} should return last polled value. It takes value from CurrentValue column - if that is NULL, that is the reason why it doesn't show. - Now we have to find out why there is NULL in that column. Support uses LeapFILE to upload big files. Please consult the upload with them as they may have some…

Hi, this is possible to make alert in Advanced Alert Manager. - Click Configure Alerts - New - Go to Trigger condition tab - Switch "Type of Property to Monitor" to "Custom Node Table Poller"(in case of table OID) or "Custom Node Poller"(in case of single OID) - Click Add in bottom of the dialog to add conditions - Select…

Hi, I think removing label is not possible. I haven't found any way how to do it. It is not possible to parse label colum. In this case you have UnDP for vtpVlanName and the "1.1" label is RowID from MIB table. You may try to open Universal Device Poller application. - Right click on "vtpVlanName" poller and select…

Craig you are correct. You can add group by editing and typing directly into group dropdown. And the group is deleted when you remove last UnDP from it. Roman

You are correct. Transforming number of interfaces into Fahrenheits really doesn't make sense. That was just example for transformation formula.

Hi, to show chart for ciscoEnvMonFanState you need to right click the poller and select Edit. - Change Keep Historical data to Yes. - Then right click the poller again and select Web Display. The option Chart will be available. Roman

Hi, you can go to Settings - Polling Settings. - There is "Polling Statistics Intervals" and there you can change "Default Node Statistics Poll Interval". (Hardware health is using this one) - Click Re-Apply Polling Statistics Intervals - Confirm settings by Submit Interfaces has separate polling interval, so it will be…

Kish, I have tested this more deeply and found out that it works. I have configured new alert to Check this alert every 1 minute. - Trigger conditions "Poller name contains ups" and "Value is equal to 0". - Do not trigger action until condition exist for 2 minutes. Attached is time flow of triggering single alert for…

Hi, what do you mean by assigning polling childs to a custom poller? - Can you explain what would you like to achieve? Roman

Hi, thank you for basic check. In this case it would be best to create support ticket and send us data from Orion Diagnostics. You may put ticket number here, I will check it. Roman

Hi, We will consider fixing this in future releases, but there is no estimate when it will be done. Roman

superfly99 It is strange that you have beside Temperature Unit description "This allows the user to view the Real-Time Process Explorer." - It is normally beside "Real-Time Process Explorer" settings.

MaGa79, if you open UnDP application there are Example pollers, but they doesn't have set the Enumeration for "ciscoEnvMonSupplyState" Configure enumeration here: Values for enumeration are here: http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=ciscoEnvMonSupplyState Roman

Hi, in Universal Device Poller application you may configure label for column... - During creating UnDP in step "Label the Rows in Your table" - Or right click on already created poller and select "Label". 1. Try "interface names for Orion", it worked for me for vmVlan (1.3.6.1.4.1.9.9.68.1.2.2.1.2). 2. There is also…

Hi, this is possible to achieve with transformed poller. - When creating transformed poller make sure that Polling interval is the same for (Universal Device Poller)UnDP and for transform poller. Make sure that both pollers are assigned to the node that you want to poll. - If you would like to divide by 100 you can use…

Hi, it is not possible to limit table only to rows that have values from both pollers. But when you click Edit on the resource, you can select which rows will be shown. Simply unselect these that you don't want. - This will work only if RowIDs does not change so much. Roman

If the result is string you can use parse function, which can extract numbers from string using regex. - But the function is limited for only simple results. It can return only one number(group). And also the regex match cannot be very complicated. parse((?<result>\d+), {poller_name}) \d+ is regex expression {poller_name}…

Parse function can extract numbers from text string. Returned value can be only number. Let's have example that poller returns this text string "Example1Poller50Value 300". - You may extract numbers in the string with these expressions: 1: parse((?<result>Example\d), {poller}) 50: parse((?<result>\d\dVal), {poller}) 300:…

Hi, this is possible to do in Advanced Alert Manager. - Click Configure Alerts - New - Go to Trigger condition tab - Switch "Type of Property to Monitor" to "Custom Node Poller" - Click Add in bottom of the dialog to add conditions - Select Simple conditions - Set conditions like Poller Name is equal to…

Hi, It looks like that device return incorrect data for Switch 2 and 3. You may check that by creating new Universal Device Poller: - Into OID paste "1.3.6.1.4.1.9.9.13.1.5.1.3" or "1.3.6.1.4.1.9.9.13.1.5.1.2" and then click "Browse MIB Tree" - Select Switch 2 or 3 from dropdowns on right side - Click "Test" button If the…

Hi, the issue with number formated as date on the map is already known. - Fix is in current beta version of NPM 12, but it should not be installed on production environment. Best is to wait for official release. Roman

Hi, graph that can show the sum is "Multiple Universal Device Pollers Chart" - When you click Edit on the graph you can select "Also show the sum". - Other option to get sum is to have several Universal device pollers(UnDP) for each value - then create transformed poller to sum these. You can add transformed poller to the…

Hi, I have also not found graph for multiple pollers showing multiple rows. There might be workaround to create UnDP for each row, for each value. - This might be feasible if there is some small and constant number of rows. But if there is 10 rows, you would have 30 UnDPs for Connections number, Bytes in and Bytes out. -…

Hi, I have created similar scenario. - I have created poller ifNumber to poll number of interfaces. (It doesn't matter what number you divide or transform) - Then I have created transformed poller "Transf" like this: The transformation formula is CtoF({ifNumber}/2) - First it divides poller by 2, then coverts to…

Hi, the color of UnDP leafs on the map changes according to configured thresholds. - If threshold is not defined(default) it is only green(polling) and gray(not polling). You can configure thresholds in Settings - Custom Poller Thresholds. - On the left side select poller. - On the right side first select "Poller Value…

Hi, I have tested the upgrade to NPM 10.5 and the settings for UnDPs remained the same. emorillo2 or supersub do you still have database backup before the upgrade? - Could you please provide export of table [CustomPollers] ? - Also please describe NPM version from which the upgrade was performed. If you consider the data…