Comments
-
Even for very small deployments, automation would be VERY preferable! There should be a link/box that checks, downloads, and installs ALL updates/upgrades automagically and checks dependencies while doing so. The below was sent to SolarWinds via our Account Manager, and might not be the best way, but... SolarWinds is the…
-
I would love to see this capability... I would like to scan a specific range of IP addresses in each subnet, and don't want to add 255+ individual subnet scans... (such as 192.168.1.0-192.168.255.255, but only scan for the range of .1-.25 or .26-.60 in each subnet)...
-
For those that don't know a lot about those processes (me), exactly how would you accomplish this with SDK and SWQL? I am in the exact same boat (but only have ~200 AP's), we are replacing older units, all the new ones get added, but the old ones do not go away. I know there are "workarounds", but I don't think it would…
-
Our web programmer came up with a rather Kludgy solution that works, using our ORIGINAL URL, he sends a request from our webserver to the SolarWinds server (null request, I believe), that spawns the Authentication prompt (with no action needed on the Webserver side), then sends ANOTHER request for the actual Gauge URL,…
-
We tested with IE and Firefox.. Support case opened, so far, they suggested very similar to your post above with the "DirectLink" account, but setting up a limited access account to the gauge and add the credentials into the URL link. This "works" for the VIEW (which shows the FULL Interface gauge information, but we…
-
Following these links as guides, I set up the DirectLink UserID, and created a View for the Bandwidth Gauge... It seems to work about 75%... Initial page load brings up a sign-in prompt, but closing the prompt and reloading the page brings up the Gauge without further prompting... Not a useable solution for our clients or…
-
This has happened through FIVE (5!) software revisions, we have opened up 2 separate support tickets with HP, both of which they state they cannot duplicate our issue... This posting was a last gasp effort to see if we could find another solution. Our work-around is to run the SNMP Sweep in very small increments (one…
-
That sounds like a great approach, but how do I set up the Bandwidth Gauge widget as a "View"?... We do NOT want any other information in the frame on our web page...
-
I am evaluating that product (a little pricey if you add in the Responders). It does not quite do what I want. Although it does scan, create a baseline, and report "changes", it scans through ALL the subnet ranges that are discovered. What I would REALLY like to find is a product that can pull/poll the SNMP information…
-
From my Tech Support case, this "Feature Request has not been built in yet (from 2011), so they do not have any "fix". I DID, however, find a way to BULK IGNORE in a few dozen mouse clicks, versus thousands of individual Interface selections. Here is the process: BULK "Add to the Ignore List" Process: Start from Network…
-
Pulse Secure, PSA-3000 1.3.6.1.2.1.1.2.0 sysObjectID.0 OBJECT-IDENTIFIER 1.3.6.1.4.1.12532.256.2.1 1.3.6.1.2.1.1.1.0 sysDescr.0 DisplayString "Pulse Secure, LLC,Pulse Connect Secure,PSA-3000,9.0R2.1 (build 63975)"
-
This is still not something that is available in Network Sonar AFAIK... I have just found a way to add all unwanted interfaces to the "Ignore list" without selecting every interface. A little kludgy, but it works: BULK "Add to the Ignore List" Process: Start from Network Sonar, Scheduled Discovery Results, Step 1: Select…
-
Not pursuing a final solution, work-around in place and no further effort to fix authorized...
-
It seems to be a recurring theme, but PLEASE!!! Ability to run these tools as SERVICES! More companies are installing the Toolset on Multi-Use Servers, and cannot be logged into them 24/7. This thread has been open over a year, and the official SW response is still "We cannot support this setup. The Toolset was never coded…
