pvaldes

Hi vhcato, This is what I have right now on my servers: Elements 7669 Network Node Elements 614 Interface Elements 5530 Volume Elements 1525 My specs are on my signature below and so far the RAM on the SQL Server is constantly on 95% (28.8Gig) which I read is normal due to SQL.exe memory hog. My question is, for the amount…

OK, I found the problem. Setup on my end was set to current and not historical. I have set that to historical now on the fields. On the Orion Report Writer, the result look better. Another problem, on the NPM report the results are different to what it generated on the Report Writer.

Hi, I too need this feature. SW NPM/NTA is awesome, it will be legendary if you add this feature in the next version release. Managers love to see pretty line or pie charts and less reading. Thanks

Hi, Is there a better way of setting up the condition base on the interface type for T1/E1 down? Right now I'm basing the alert on "Interface Name starts with E1 0" Some interface have E1 0/0/0 which works for me but some with E1 0/0/1 doesn't trigger an alert.

Hi Jon/Roger, Thanks for the reply. Yes, I would like to get Solarwinds recommendation on SQL 2005/2008 tweaks base on their products. I'm running all three modules and out of the three, NTA eats alot of memory resource and after following the Solarwinds KB support.solarwinds.com/.../ProblemDetail.cfm, my DB server memory…

Current Utilization on the router which shows the interface Ge0/1.319

Hi, Is there a better way of setting up the interface name? If I use the existing condition for interface name Interface Name starts with T1 0 its not as affective. Some controllers may be using slot 1 instead of 0 so I will need to place another condition Interface Name starts with T1 1 HELP Thanks

BTW, Here is the code on the Custom HTML page: <iframe src="">server/.../Chart.aspx frameborder=0 scrolling=no width=750 height=410 </iframe> Attached is the result I get after two successful logins. Thanks

Hi, I'm more a Cisco person than a Microsoft. I recently upgraded to 10.1 and I would like to know if the NPM server must be on the same domain in order to Intergrate AD with NPM? Right now, our NPM server is a stand-alone workgroup. Thanks

Hi, Is there an update on the Additional Polling Engine aswell? Thanks

I found this today, see attached. The interface went up to 48% transmit utilization and when ran the report, all days state 48% transmit utilization. Its either my setup is wrong or NPM bug that needs attention.

Thanks for picking that up freemen. I thought the new Orion are not 64bit apps as well. Must have read it wrong. In that case, the web server will remain as is. Not sure what to do with the new Polling Engine. Will have to consult with my vendor.

Hi guys, After a lot of testing, I have finally made some progress with this task. Now I have one problem, when I login for the 1st time to this custom HTML page, each resources shows the same login again, meaning I have to login twice to view the min/max/avg bps for each routers WAN interface. See attached. Anyone know a…

Design Selected Fields Thanks

Hi DirtySouth, No go with the astericks. Ill try support ticket. If you or any1 knows the problem and fix, please let me know via this thread. Thanks again.

Hi Keith, Thanks for the reply. Changing the menu bar color helps more to match our corporate color. Thanks heaps.

Hi Andy, With regards to the release of Orion CBQoS, will this be an add-on module to NPM or will it be part of an existing Solarwinds module such as VOIP Monitoring or NTA next version up? Reason for my question is because we are looking to purchase NPM, NTA and NCM in the next 2 months and my manager dont want to have to…

Hi, Thanks. I tried that report which works and shows the exact one you posted above but on the UnDP file, I cant see the hardware model pollers (which you have on your report). Unless I'm doing something wrong. I can see the HP components Array, CPU, Drive, Mem, NIC, PSU only under the Orion UDP. Thanks again for your…

Hi drak, Thanks for the post. I have applied the new hot fix for NPM 10 SP1. After restart all the service and viewing the polling engine status via the web console I notice the lag when loading the page. Polling Engine still states down with a red icon, but all is still working. This is what I have installed on the…

Hi Geoffrey, With regards to NTA, I just need to understand what I need to do... Install APE on the new server, Install NPM (same version). Can I install NTA aswell on the new server? Both NPM and NTA are SLX license and I would like to load balance these two modules between the two servers. Thanks Peter

Thanks for your reply. I was afraid someone would say that. Making multiple alerts. Is there an easier way on grouping the conditions (E1 and T1) (GW1 and VG1) in the one alert? Is the condition 'Interface name - contains - GW1' correct or can I use another condition to match whats in the hostname?

Thanks all for your replies. I will test and let you know how I go with the results.

Another report generated. Thanks

I've done a test by downloading large number of data. From my PC, I can see my download is averaging around 300Kbytes p/s and when I did a search on my IP Address using NTA Search By Endpoints, the flow chart is accurate but the table below doesn't seem correct. See attached The table states TCP 10.6Mbytes only. The small…

Hi, Installed SP4. I read that I must have IPAM to use SP5 for Orion NPM. Is this correct? Thanks.

Found it. Orion Report Scheduler. Thanks

Hi, Anyone having the same issue? Below are current polling numbers. My spec is on my signature and out of the 32GIG RAM it already using 53% and rising everyday by 1-2%. Elements5630 Network Node Elements319 Interface Elements4576 Volume Elements735

Hi, Recently I had my Node Details page customize by remove the default SW resource out of the box and adding custom pollers accidentally affecting all nodes view to change. Can someone please post up the default resource assign to Node Details as a global setup? Thanks

Hi, Thanks for the replies. I tried the format string to 0.000 and even 0.00000 and the result is still the same. Yesterday the total bytes received and transmitted was under 500Mbytes, but the previous days the data was over a 1Gbyte. The result for yesterdays utilization is still the same percentage as the previous days.…

Hi, Tested my DB Server using the new SQL Server 2008 DB Performance Counters template and I'm getting Testing on node SVC-NETMON-SQL: failed with 'NotAvailable' status The network path was not found The credentials according to the document is the Windows Auth on the DB server. I'm using the correct username and password…