noobes

Thanks superfly I'll give that a try. Having problems with our installation right now but will get back. Much appreciated. Where was using the % documented?I couldn't find it anywhere.

Great help! Thanks very much!!

Hi squinsey​. Yes after I added the fully qualified Domain name the reports ran fine thereafter....with one exception, I still can't attach a pdf file to a mail but every other type works. I should have probably pursued the pdf part but I actually haven't got a need for it at the moment I just needed to attach csv & xls. I…

Found a way to do it on NCM Rhidian, so never had the chance/time to try your idea. I am very grateful for your input though so thank you very much RhidianS .

What I meant by the ol' dependable was to restart services on pollers, then the figures were displaying for me again

I am basing/attaching/associating the custom property on/with a router. Below is the list of custom properties available for me to choose as a selection criteria for the nodes on which I wish to run a config change template No sign of include_for_bgp_job property which I have created..... However in the Manage Nodes tab of…

Hi bourlis - I used your config above and switched the variables, however when I populate the context: field when adding a node it fails but if I remove the context field's value in this case 'vlan-' it then starts to work?!! I have gotten this working without specifying a context but I believe it is necessary to have a…

I can't see an option to map more than one value returned to a more readable value ie 2 = ok. How can I add a second value? @azabiel

Hi – it appears that I have another thwack account using my mail address?? My username is noobes and I haven’t created any new accounts recently?! Can you clarify what’s happening here? Thanks, Wayne

Cheers Craig, we're upgrading soon to NCM 7.4. That feature will be a great help for me! Any issues you faced when upgrading from 7.3 - 7.4 you'd like to share?

I got very excited when I read through this at first. What I'm trying to do is push out 'no ip proxy-arp' to every interface that has not got it configured (a little more complicated than that but for the purpose of simplicity...) The bit that really got me going was 'Tell it to "Run script on each config block in…

@Chris T Very good work, I am trying to add 'no ip proxy-arp' to interfaces that... * DON'T have no ip proxy-arp configured * DO have an IP address (layer 3) * DON'T have switchport within the config block (layer 2) * DON'T have shutdown within the config block (are UP) As you can see my config block identifier is not as…

Where can these update docs be downloaded from?

Unfortunately not! This issue has moved to the back of my priority queue. I'll let you know if I've found a way to do it. I think we were considering using a third party SCP server

That's great stuff Superfly, thanks I'll give that a go! Much appreciated.

Hi @Irishjd - what was the name of the table you found SNMPv3 credentials in? Thanks a million in advance!

Excellent thanks for the help, however when I go to mnanage nodes in NCM settings the page is having trouble loading. This has support ticket written all over it! We are upgrading soon so may as well wait 'til that's done. Thanks for the help!

No I rediscovered them and then refreshed the page and they then disappeared. A bug of some sort in there?! Thanks for the reply.

Hi Malik, I have the engineers toolset and want to run the continuous ping tool on 5 nodes for an 8 hour period. Should I expect any problems with this would I generate a huge amount of data? Thanks @malik Haider

Where is it pulling these credentials from? Is it user level log in credentials? If so is it not possible to just change them there?

Thanks for the reply, any recommendations for the sites you search for OIDs?

Thanks Sean! Good answer. Thorough

Thanks for your replies guys aschmitt, that's interesting that you found the performance increase shocking, our network is 2500+ nodes so hopefully those increases will be visible to us too! I don't think you guys really understood what I was saying. We are going to be performing a hardware upgrade regardless, what I…

Thanks Ram! Is there any way to vote up answers here?

Thanks for the reply. As it turned out Yes I can poll with SNMP V3 and receive traps in a v2 format so yes you're right traps and polls are separate things. I didn't configure the end device myself but it turns out that we needed to configure this on the end device

Mateusz O One thing Mateusz, I can't see all the syntax in that notepad crop you posted with the additional lines in it could you please re-send the lines of code? Thanks so much!

One thing Mateusz, I can't see all the syntax in that notepad crop you posted with the additional lines in it could you please re-send the lines of code? Thanks so much!

Woah, that'll take a little time to get my head around! Thanks so much though I will give that a try and let you know how I got on. Really appreciate the input though! Thanks

OK so NPM 1 - SAM 0. Is it just the fact that SAM has these certain OIDs bundled up in templates that is its main draw?jeff.stewart​

That's great thanks Rhidian, I will have a look at that and let you know how I got on. Thanks so much for the input though really appreciate it!!!