neilmborilla

add my Case #80913 . The ticket has been open for almost two weeks already. I have exactly the same problem on the web console. None of the steps below resolve it; * We have run configuration wizard several times...... * Solarwind tech support in goto meeting for more than 45 mins..... * Remove all elements from the web…

Hi brandon, does this defect has been addressed in SP3?

Thanks for a freat piece GOB, Is there a way to add or change hostname target to CAPTION instead of IP ADDRESS?

I might be in the wrong page =) I'm refering to NPM's Alert manager module that has the ability to send WEB/HTML Page when an alert trigger accross the network. The webpage needs credentials so I'm finding a way to bypass or automate the login window of that webpage , until I saw this thread

Can anyone give me OIDs? Interface = ifAdminStatus = 1.3.6.1.2.1.2.2.1.7 Volume = hrDeviceStatus.1 - n = 1.3.6.1.2.1.25.3.2.1.1 - n note: - n = indicates the number of volume you have However, I would still like to know what the poller is requesting via SNMP to determine the status of an interface and a volume. Good…

Thanks Brandon

add me on this "lab license tier" idea

I'm not seeing these options under "Servers" -- Just Stop/Start services, Configure Hot Standby, Poller Loadbalancing. 9.5slx. ??? It's under poller Load Balancing

bump!

I suggest to open support ticket for this. They might advice you to use configuration wizard Is your database is installed within solarwind server also or in other server?

that makes sense. Follow up Question: 1. (Non-busy scenario) How virtual firewall jumped from one router to another? how do you correct this 2. (busy-scenario) How do you increase protocol priority to avoid it from dropping?(ex. SNMP, ICMP, TCP). Considering the problem is not reside on a firewall

Thanks Denny

Somebody needs to get this resolved.

Every design has it's own pro's and con's. Like for congo's case, what if the poller engine that runs on all critical devices failed? You will then lose visibility on all of your critical devices. Same thing with geographically setup or per site, You will know which sites are affected if that polling engine fails. Unless…

According to Brandon...this is on their road map for development.....I was able to have a glimpse and its cool. Report Scheduler would soon be on the Web Console (like Alert Manager). I will definitely participate if SW release an RC or would like to ask comments and suggestions on "Users" perspective. On the otherhand,…

How long would it take for the complete training sessions?

I have experienced the same issue as the topic starter. I have pending ticket to tech support and still they haven't figured out what went wrong.

So I'll note that most people have had good upgrades, but that many of the people with bad upgrades write about them on thwack, which is natural and great and why thwack exists, but it also leads to a slightly erroneous perception that the release is bumpier than it really is. Good thing about it is that SW staff is very…

Thanks for all the inputs sir and also thanks for the patience. What happen if I use the option of balance polling engine in Monitor Polling Engine? What are the pro's and con's ?

Looks like Advanced alert is buggy. I experienced the same problem. 1. Mine was to trigger alert when it rebooted Rule: Last Boot Has Changed 2. Not all alerts are being triggered (down, up, cpu utilization, etc) 3. Even in syslog, it will only triggered when I unchecked "Trigger Threshold" But Once I set it up, the alert…

I suggest removing this thread for so obvious reason

You have to setup the configuration on your network device to forward syslog or events to NPM server. From syslog console you can configure the ALERTS. From my experience NPM does not detect or trigger alert when the device or interface flapped,especially in WAN. That's for the syslog to cover the detection

This error message is present on the VoIP Site View page, even when the resource is not detached I understand mistakes do happen, but I don't know how stuff like this gets past QA testing?Perhaps Solarwinds can reduce our annual maintenance fee based on the number of bugs like this that we uncover, since we are essentially…

I should have searched this post first. I have very similar situation with the GonzoUK. Have you tried the following URL? server:81/.../CustomChart.aspx I used ${NodeID} instead of the static ID 115. This page cannot be sent by the Alert Manager directly. What I did was to create a custom HTML in Admin>manage view then…

It is found on the target server you wanted to monitor Windows Server Start>Administrative Tools>Services>SNMP Services Right Click SNMP Services and point to Security Tab

Hi, Did 9.5 also resolved the memory utilization is adding up physical and virtual memory on TOP XX Memory utilization summary? Thanks

(I am pretty sure it's a community supported project). I 100% support this project. (Why do we have to view a wrong information's in the first place?) This should be addressed accordingly (using UnDP is just a workaround)

You really have to check with your exchange admin/system admin Does the SMTP Server you use in orion is the same Email Gateway your company used? Does it used authentication? Some System Design recommends a separate SMTP server dedicated for relaying emails for reporting servers and/or other monitoring server.

Try reading this for your questions: http://www.solarwinds.com/NetPerfMon/SolarWinds/wwhelp/wwhimpl/js/html/wwhelp.htm#href=OrionAGConfiguringPollingEngineSettings.htm and also these two regarding SAN: Disregard if you already read those

my web interface doesn't play sound...