mscheiber

Comments

  • As you can see in the post before is set this <Configuration-Management Device="HP Procurve 420" SystemOID=" 1.3.6.1.4.1.11.2.14.11.6.4.1.1"> should be an HP node. than i inserted the sysobjt id which orion gave me out on the Node Detail Page SysObjectID 1.3.6.1.4.1.11.2.3.7.11.50 but i got the same error back. The device…
    in Problems with Config download HP 5406zl J8697A Comment by mscheiber November 2012
  • HI thx for the answer. So tried it to setup SNMP as Request config method just for testing. But after submit and tried a config download a got the error tftp server IP this is not a cisco device. An reasons for that apart from that this device isnt a cisco device
    in Problems with Config download HP 5406zl J8697A Comment by mscheiber November 2012
  • Hi thx for your replies. I have found the problem there was an error in the script the problem was the "terminal length 1000" commando at the beginning at the script so this is my actual hp commandolist <!-- edited with XML Spy v4.4 U (http://www.xmlspy.com) by () --> <!--SolarWinds Network Management Tools-->…
    in Problems with Config download HP 5406zl J8697A Comment by mscheiber November 2012
  • HI iam running this version on my 5406 switches Image stamp:/sw/code/build/btm(K_15_03) Dec 17 2010 12:29:22 K.15.03.0005 312Boot Image: Primary and i also tried your command set but its the same problem with my current one. any other ideas? regards
    in Problems with Config download HP 5406zl J8697A Comment by mscheiber November 2012
Avatar