moyerj2a

Comments

  • I wish that solar winds had it own flavor of wireshark.
    in integrate toolset with wireshark Comment by moyerj2a July 2016
  • I use MS Visio to create diagrams based on location then I put the ip address underneath the device name as a HTML link to ssh into the device. You can then save the diagram as a website then just pop it in an internal server with IIS. So no matter where I go I have the network Diagram with me. Its handy but a pain to…
    in Everyone Loves an Awesome Network Diagram Comment by moyerj2a July 2016
  • Found this to be popping up more and more these days. Have been a victim of it myself. I think that firmware in a system needs to be hardened. It is a gaping hole right now.
    in Ransomware - The Biggest Risk in 2016? Comment by moyerj2a July 2016
  • I believe I found the solution. I had created my own wr mem task to save the running-config to the startup-config and then copy the config via tftp to an old work station I had sitting around that I was re-utilizing as off server storage for the configs. When I changed the actions to wr the configs to the CatTools server…
    in Trouble with running more that 10 threads at a time Comment by moyerj2a July 2016
  • You can contact then directly at this email address. maintenance@solarwinds.com. They will get back to you pretty quick most times. If it's a dire emergency you can call the support line. This is the link to the phone tree.
    in Renewed license but still told it's expired Comment by moyerj2a July 2016
  • It sounds like you dont have table views enabled for the graph. Here is a possible solution from the guide. Overview When you launch Orion node detail views directly from Engineer's Toolset on the Web, the results table is disabled by default. The monitored nodes in the tables are not clickable. Environment All versions of…
    in Engineer's Toolset for Web browser requirements? Comment by moyerj2a July 2016
  • A lot of this depends on how you setup the custom device. You need to check the info logs and determine where it is stopping in the process. If made a custom script for the device you are going to have to turn on the debugging log under File > Enable Capture Mode. This will create a log file in the debug folder that will…
    in Using variables in custom CLI Script Comment by moyerj2a July 2016
Avatar