Comments
-
Three years and several releases later and this basic usability feature is still not available even in the shiny new NPM 12. Sighs.
-
I like your idea rgward. That would be a great enhancement.
-
The tool's home page indicates it's for Palo Alto firewalls. Also, the article link in the document appears to lead to a restricted document.
-
I used a NetBrain eval copy once and was VERY impressed with its drawing or the network. When you zoom out, detail disappears to fit the scale of what you're looking at. Zoom in far enough and you see every physical interface. I didn't take it far enough to get familiar with how it does the L2/L3 visualization. Visio is…
-
I got the t-shirt AND the backapack at CL MEL. Oh and I chatted up mavturner about Perfstack and a number of other products.
-
CUCM 11 is about 18 months old now and still there's no support by VNQM. I get the feeling this product has no love among the SolarWinds developers. I cornered about 3 different SW staff at the booth at Cisco Live this summer and none of them could give me a credible answer about why there's been such a delay in support.…
-
Posting my experience for info: I ran into this with an on-premise upgrade from 2022.4.1 to 2025.1.1. Examination of the error seemed to point to Rabbit MQ. Looking at the folder for it under c:\Programdata indicated the database had not been built/initialized and the service not installed as part of the online installer…
-
Excellent. Thanks for the feedback.
-
I just troubleshot a similar problem in setting up NCM to retrieve ASA configurations. I had a service account setup in TACACS and validated as working on the ASA. I told NCM to retrieve configurations using SSHv2. No joy. Since I can't use Wireshark to look into ssh packets, I temporarily enabled telnet login and then set…
-
I'm seeing the problem on my 4500X switches as well (with 10GBase-SR transceivers running IOS-XE 3.04.00. It's also confusing because on these switches NPM reports all of them as "power supply" and doesn't tell me the health of my actual power supply!
-
Zak, The one I just got working is on Orion NCM 7.1.1. The controller is: DESCR: "4400 Series WLAN Controller:50 APs" PID: AIR-WLC4402-50-K9 Product Version.................................. 5.2.178.0 System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3 It took about 15 minutes to download the config…
-
Any update on this request? I was just trying to accomplish something similar on a customer's NPM 11.0.1 setup and it still fails. I have plans to upgrade the customer to the latest NPM 11.5.3 if that helps. I was wondering if a work around of using the Groups in the Alert suppression logic (with the Nodes in the Trigger…
-
Your posted solution worked for me as well. Thanks for sharing!
-
Making a new group that's Domain Global worked for us. Thanks!
-
How did your move go? The "Moving your Orion NPM Database" guide remains silent on this aspect. I am looking to do the same - all my products are at the level that supports SQL 2012. Ideally I could back up the db on my current SQL 2008 server and restore it onto the new SQL 2012. MS seems to indicate that SQL will…
-
The reply by john0966 worked for me as well. I tired the one fro rschroeder first but it failed - packet capture showed that NCM was not sending the command to tell the WLC to continue downloading when it pauses during its output.
-
I just put on the NPM 10.4.1 patch and see that the Bias Current Sensor false alarms are no longer present. I do still get an alarm for receive power on an interface that's shutdown. NPM still does not report my actual power supplies (for a Cisco Catalyst 4500X) under the power supply heading. My experience opening support…
-
I got it working on VLAN SVI interfaces (input only) on a new set of 4500X (roughly equivalent to Sup-7E in a 1 RU switch) using the configuration above (StealthNet's February 9 2011 post). I don't like how the "vlan config" commands in IOS-XE work but I suppose that just something new to get used to.
-
8 years later and the procedure still works on NPM 12.
-
Still waiting for this beta here as well. we will be dropping the tool when maintenance is due if we don't see any progress.
-
Yes indeed! VNQM is not very useful to us without this integration.
-
Add me as a customer who needs CUCM 11 support!
-
Worked like a charm for me (on a SAM 5.2 system). Thanks for the tip!
-
Great tip, Leon. It saved me a call to support. It looks like a bug with the installer package. (I hit it with an NPM 10.6 fresh build.) If the package includes the prerequisites (which it does) then the MSI should know to get them. Oh well - in any case your work around worked for me. Thanks for taking the time to share.