mcbridea

This looks like the server credentials may be wrong or missing. Can you verify the credentials?

I would accomplish this by creating a report for those changes and placing the report on the NPM home page.

It is often the case that the DB structure changes with updates so I recommend backing up the db before upgrading. Support can help with getting this running again. Andy 

If your APC has a MIB with an object that reflects the power status you could build a Universal Device Poller (UnDP) to the OID and alert odd of it. AAM allows for alert delays. Check in the content exchange section for a UnDP that may do the job for you.

dbo.ServicePorts

Are you sure the credentials are correct and that you can reach those devices using TFTP?

Please add screen shot

You can customizes the views in Orion Admin area -> Manage Views

Have you looked through the COntent Exchange area? http://thwack.solarwinds.com/media/40/orion-npm-content/orion-custom-reports/?Sort=Downloads

Hi Lake, I am checking on this issue but please open a ticket support will work with you on it. Andy

Hi and welcome to Thwack! The Administrator Guides give hardware specs for each product. You are getting a lot of products and the guides don't address this much so I'll help with some guidance. NPM runs as the main product and NTA, IP SLAM (formerly VoIP), and IPAM run as modules on NPM. These can all be installed on one…

You can create a Custom Property for Building, City, Campus, or such and use that to sort by.

What SP are you on? Should be SP4.

Can you give us some context to what were seeing?

Make sure you config has (config) # ip flow-export version 5|9 (Choose v5 or v9) (config) # ip flow-export destination xxx.xxx.xxx.xxx 2055 (no need to increment port number as in your config unless you have two collectors at the same IP destination address and for each interface (config-if) #ip flow ingress (config-if)…

Some wireless manufacturers allow for shared thin access management. It is a fairly new technology. Virtual controllers.

Your sales team can get you the 3.0 and 3.1 bits

You can add reports to the web - is that what you are asking to do?

This can be done by publishing a report but it will be a table rather than a chart. Is that acceptable?

Hi Peter and welcome to network management. The NTA graphs are volumetric today but we have a feature request to show them by rate, which will help you to see the rate at any particular point. I would suggest useing the Orion interface charts to compare to what the SP is showing you. That would be more apples to apples.…

Can you post the script?

Do you have a reset condition on the alert? It looks like the alert action needs some variables added like nodename to make the alert more informative.

Hi Mike! I am over at Loop1 Systems now but I'll point this thread over to the SWI Infodev team. Best Regards - Andy Director of Technical Training Loop1 Systems

I have tested this on NPM 9.5 SP4 and it works with no problem. I suggest you open a ticket.

As this is an evaluation, I have forwarded this to a sales enginner to assist you.

Call support for assistance on this. Backdoor access if available should not be posted in a public forum.

Take a look at this KB http://knowledgebase.solarwinds.com/kb/questions/794/Can%27t+receive+NetFlow+data+from+Cisco+Catalyst+6509+switches

Can you verify the product and version number?

Can you post a screen shot of this? Andy

Well, I can't take all the credit. Phil Morin from Information Development was my writing partner on this one and did a GREAT job! Andy