mbilgrav ✭✭✭✭✭

Im shocked that it isnt there already ... VRF on NXOS is widely used

i think there alteady is avote for this but still

voted - we need environment, Heatlh ha monitoring etc

Yes me wantz it

I run NCM 7.3.2, NPM 11.5; for reasons not yet clear to me, I have discovered that There are two kinds of Reports. OrionReports and ConfigReports. The latter is found under CONFIGs -. REPORTs and in here are inventory reports, that will pull firewall and other stuff serials !! the name is Physical Entities (Serial Number)…

I need the Orion Map widget to be able to do the same as Classic Widget for Maps, where I can use Maps dynamically, using f.ex ${Name} - This Option isnt implemented in "new" Orion Modern Map widget, as in here I have to select a fixed map name, thus blowing it for all the dynamic group status pages , as they will se the…

IP SLA UDP jitter support for N7k ! I was under the impression it worked, and started to configure it, only t ofind this thread ... I used it like this: Create manually SLA in router, after enable the feature. Add the monitor operation in VNQM, which discovers it, reads tags etc, but is not showing any data ... ICMP echo…

Hello Sir, I am investigation similar approach, as I need to monitor UCS-C220 M6 chassis for hardware health like failed HDD in RAID etc I am unable to locate and "Hardware health" when list resources, nor can I get "Poll for UCS" to work. I suspect its because the UCS-C isnt a UCS MANAGER How to you manage this ?

So to repeat myselfs, the reply I ended up with i present int the first line: I ended up just adding a custom device template and enabled it for auto detection: It very much need more focus, but it does the trick on fetching the config for backup reasons this <Command Name="RESET" Value="terminal length 999"/> and this:…

The really oly pain here is we need to do this for eash OID we want monitored ... like .1.3.6.1.4.1.12356.101.4.3.2.1.2.73 = STRING: "PS1 Status" (0=ok or 1= ?) .1.3.6.1.4.1.12356.101.4.3.2.1.2.80 = STRING: "PS2 Status" (0=ok or 1= ?) and maybe one temp OID and one FAN

So I am not gonna do SWQL in my alerts, as I think this is bad for perfomance. I have created the UnDP, then goto "CustomPollerThresholds" and add the values and logic there, then goto an alert and create and add the alerts definition - This method will do for any OID we poll, so I will go ahead and create same style…

Hiya, I know how your expert thinks :-9 in a single management IP setup, you will alway poll the sameIP, right :-) But since this is now the secondardy unit, the Prio OID reflect this. So from a SNMP poll point of view the Prio OID changes. Off course it doesnt change in the units, only in the OID. And I tested this…

Hiya @Stuartd Thanks alot for your fine reply. And you're rihgt the HA will only work when each member has a mgmt-ip. My setup doesnt, so the OID will always be "1", both in failed and normal mode however, i tested this today: These two OID change when in a failover scenarios: .1.3.6.1.4.1.12356.101.13.2.1.1.16.1 = STRING:…

Thanks Sja ;-) Indeed a short and somewhta sad list ... Believe me, if grunt about this to whomever ask for my opinion around Fortigates & Orions :-) This will just be one of many tales to tell.

Hiya M. Thanks for taking your time and reply to my question. I am curious to know how you monitor the fortigate 2601F hardware using NPM - please do tell more. I can't find any health monitoring other than CPU/RAM. I need to know about PSU, FANs, HA Status , and this by means of polling - not reply on the box itselfs to…

I ended up just adding a custom device template and enabled it for auto detection: <!--SolarWinds Network Management Tools--> <!--Copyright 2007 SolarWinds.Net All rights reserved--> <Configuration-Management Device="Mellanox SH2200" SystemOID="1.3.6.1.4.1.33049.1.1.1.866573"> <Commands> <Command Name="RESET"…

Hi, In that case I would suspect the device. Try "default Interface" the interface as this would clear IP info and Netflow config on the interface. Last resort ... reboot device

by "disabled interface" you mean its disabled in Orion or its in shutdown in the device ?

have you tried to upgrade ?

Hiya Marc, Thanks for your reply / I did prior to the post, upgrade the MIB to latest version 1.1.0.247 I have now also done SNMPWALK, and compaired the 2110 output with the "working" 2130 output They both respodns to the same OID's , only the 2130 whici has dual FRU PSU, report this, which is expected. I have attached a…

Thanks alot Tony ! Very fine suggestion I have ofcource allready tried 3v times reinstalling . uninstalling etc, even cleared tables like: [dbo].[IPAM_Engine] [dbo].[WebSettings] [dbo].[VoipEngines] [dbo].[Engines] [dbo].[OrionServers] with ref to the bad server. If you can check : 00559108 I am ready anytime Today was a…

digging more, it looks like I only see nodeID related event, and therefor not seeing the interface event etc on that node ... (?) How can I get the Last xx Event widget to show same content as Event viewer ??

I think its this one : https://solarwinds-v8.hosted.jivesoftware.com/docs/DOC-157379

The interface info is within the Netflow info, so it just informa you that the interface is not managed within Orion. I am runing with the setting in "NetFlow Traffic Analyzer Settings" Enable automatic addition of NetFlow sources Allow monitoring of flows from unmonitored ports (666 of xxx PDU(s) have been received from…

wbrown - thx 4 the reply. Only I get this error, and the link is dead ... (the "Why is ..." link)

Hi,Please tell me how you import this poller ? - I get error when doing both import via GUI and via Server-App ?

I like your reply - but can you tell me how would you create a report that will show you the serialnumbers for both routers and firewall (and other device for that matter) How can this be done and what approches must be made

did you manage to solve this ?

Even on 12.4 this is still an issue; you have to be Node Manager before the SSH ACCESS ENABLE are in effect. Would be VERY nice if the SSH ACCESS ENABLE would work in all RoleBasedAccess scenarios.

yes, i do this via a custompoller i found in thwack somewhere : (Cant really recall where ... ) cacheClientTotalConns (The number of total client connections.) cacheServerTotalConns (The total number of server connections.) CPU_Utilization (Percent CPU utilization.) fanRPMs (Fan speed in RPMs.) mailTransferThreads (Number…