mark_wiggans

Yes correct. To monitor the FCports on the switch, mainly status(up or down), errors, utilization, dropped frames and etc...you will need to create separate custom mib pollers for every single port on the switch and countless additional pollers for every property on each port.related links:

 There used to be a remote admin pack but this is no longer available-

 Only someone with Admin. rights may reset passwords. You might consider using Pass-through http://www.solarwinds.com/NetPerfMon/SolarWinds/OrionAdministratorGuide.1.353.htm

 Netflow is a separate module. More info about this module, including a trial version can be found here www.solarwinds.com/.../

Try manually copying the file: C:\Program Files\SolarWinds\Orion\OrionReportWriter.Schema to the additional webserver.

Will- Not sure what the exact issue you are having, but below are the steps to import custom property data- To import custom property data: 1. Click Start > SolarWinds Orion Network Performance Monitor > Advanced Features > Custom Property Editor. 2. Click File > Import, and then select Import from Comma Delimited File or…

Polling Engine on ORN02AS299 Last Database SyncNow Network Elements387 Nodes, 8526 Interfaces, 0 Volumes, 8913 Total Elements Running Since9/3/2008 4:23:16 PM Polling Completion99.50 % Operating SystemMicrosoft Windows NT 5.2.3790 Service Pack 1 Service PackService Pack 1 PackageOrion NPM Polling Engine v9 SLX Are you…

Miron, To remove this extra tab locate the My Computer c:\\->Inetpub-> Sloarwinds folder. In C:\InetPub\SolarWinds Locate any instances of a wireless module folder and delete them. Refresh the Web browser and that should clear out the extraneous tab. Mark Wiggans SolarWinds Support

 Re-run the website portion of the configuration wizard, this should help.Some other suggestions can be found here=

 I'm sorry to hear your about frustration in getting a license reset. To clarify, license resets are done through customer service and not tech support. For best results you can email them directly at customerservice@solarwinds.com for license resets or if you have maintenance issues you can email…

 You can right click on the Node-> Node Details and select Unmanage.

 Try running through the Configuration Wizard to clear this up. Select the services box....

 There was a lengthy discussion about this here that could offer some insight.

 Events may be acknowledged and cleared from the Event Details window by clicking on the X. Specific details can be found here http://www.solarwinds.com/NetPerfMon/SolarWinds/OrionAdministratorGuide.1.32.htm

 contact me via email- and we might have a fix for this.

 Here is a helpful walkthrough- www.solarwinds.com/.../OrionAdvancedAlerts.html

page 83. http://www.solarwinds.com/documentation/ipMonitor/docs/ipMonitorAdministratorGuide.pdf let us know if this helps or not. You can also browse the old ipmonitor support site for FAQs, etc... http://support.ipmonitor.com/faqs.aspx

This tutorial demonstrates custom grouping. Create a custom view for a specific device type - SolarWinds Worldwide, LLC. Help and Support

 That feature within the System Mgr. is for the Application Monitor installations and not the new Application Performance Monitor. All of the APM features are utilized via the website.

 You will need to uninstall from the add remove programs any older versions currently on the computer. Can you clarify that you want to begin from zero? meaning do not wish to retain historical data and you want to create a new database? 

 You would need to use Filters based on SQL. After clicking on Edit you will see a list of filter examples.

http://support.ipmonitor.com/helps/14150e785df447c481b1c8163d179e20.aspx http://support.ipmonitor.com/faqs/da7de2250f9d4341adb223376a02c8f6.aspx you may also try this http://support.ipmonitor.com/tips/1945268aac6a418695d0c19034b919e6.aspx hope this helps!

To enable user access control: 1. Click File > Settings > Security. 2. Check Require a login to use Cirrus Configuration Manager. 3. If you want to assign device login credentials to user accounts, complete the following procedure: a. Click Device Connectivity Method. b. Click Manage devices using a combination of…

 This guy had a similar error yet the alerts never worked until the syntax was changed Also, this may be helpful? support.microsoft.com/.../919356

 You may try this suggestion- * Click Start > All Programs > Accessories > System Tools > Task Scheduler. * Right-click your Orion NCM job, and then click Properties. * Click Run whether user is logged on or not.

Nothing was added per say, just official support now for the monitoring of a Windows 2008 device.

To view from your web console you will need to add the resources to the views in your web console. 1. Click Admin in the top menu bar. 2. Click Customize Views in the left pane menu. 3. Click Add. 4. Enter the Name of New View, and then select the Type of View.

 Not at this time with the current architecture.

 Generally SNMP is treated as a low priority. You might check for access-lists possibly blocking SNMP? You can alert based on the interface being in an unknown state. This will trigger whenever SNMP doesn't respond. Also, a simple restart of the Windows SNMP Service should clear these out.

 sure- just add the IP address as an ICMP only node.