Comments
-
Yuck, this still isn't resolved
-
I assume you made sure they are at the same firmware revisions? In the past, I have had to make the changes multiple times to get some to 'take'. You might try a full reset on their settings and trying to reconfigure them. We moving away from UPS's in general in the switchrooms because of their high failure rate, and…
-
I agree, NCM can execute command lines using SSH/Telnet against the devices and use the output for configuration capture, etc. it seems there should be an opportunity for those with UDT/NCM licenses to potentially gather ARP information that way.
-
Mark, Thanks for the reply! I did see Josh's post. I have addressed as many of these items as I can within the confines I have been given. My question is kind of an addendum to his post, based on the SQL optimization that one can attain by separating the tempdb and/or logs from the data. I can install one of two ways, and…
-
I am making some assumptions here, but these are my thoughts anyway. The Minuteman SNMP-SSL cards are notoriously unintuitive and difficult to configure, that may be what you are using in your UPS for management. I have had success with SNMP v2c in read only, and v3 in read/write after a lot of messing around. The first…
-
I would also like to add my desire for this feature. We are limited on IP address tracking for hundreds of devices in our datacenters because of it. I would add that using VRF's, where ARP information is on the routers has been a workaround.
-
Minuteman Endeavor ED1000RM2U SysObjectID 1.3.6.1.4.1.30650 Group Description OID Type Attr Value upsIdentGroupManufacturer 1.3.6.1.4.1.30650.1.2.1.1.1.1 DisplayString RO Minuteman upsIdentGroupModel 1.3.6.1.4.1.30650.1.2.1.1.1.2 DisplayString RO ED1000RM2U upsIdentGroupUPSFirmwareVersion 1.3.6.1.4.1.30650.1.2.1.1.1.3…
-
Great responses everyone, thank you!