maggiewang

MA5800-X2 supports, the board is H901PISA, an AC power board, consisting of an AC power unit and a monitoring unit. and also support DC power supply with H901PISA power board.

When using Huawei power supply unitis, Huawei fixed S5700 switches support 110V AC input power. The power consumption of most powered devices (PDs) is 4W to 5W; therefore, 250W and 500W power supply units can provide sufficient PoE power for PDs.

The Huawei MA5800 X15 does not support active/standby mode, but only load sharing mode. The MA5800 X15 has a distributed architecture. When two control boards are configured, the active and standby control boards carry services at the same time to effectively utilize the bandwidth of two control boards.

On Huawei MA5616, you can query packet statistics of a port but cannot directly query traffic of a port. To obtain traffic of a port, you can collect the number of frames received or transmitted by the port in a period of time.

The -48 V power supply cannot be used when the Huawei MA5616 uses the PAIB power board. PAIB is an AC input power board and uses AC power supply by default. Its DC terminal is connected to -48 V battery. PAIB is installed with a relay for protecting the battery and the relay turns on the circuit to the -48 V battery for…

Yes, H901XSED, 8-port symmetric 10G GPON (XGS-PON) OLT Interface Board. It works together with the ONU to provide symmetric 10G GPON access services.

There have other several different places here: 1. Huawei SMU01A can support WebUI remote manage function,Huawei SMU01B and Huawei SMU01C cannot support WebUI feature. 2. Huawei SMU01B supports Huawei master/slave protocols and access network point-to-point protocols, which allows Huawei access network communications…

Yes, it can be compatible, if Huawei GPFD board with B+ SFP modules, it doesn't effect if the ONT (Huawei HG8546M) with B+ or C+ modules.