Comments
-
From the network side of things I wouldn't say system engineers don't know what they are doing when it comes to networking - I would say they half know what they are doing. Which can cause more confusion. Usually, by the time I've been included in a VM discussion the VM architecture has been decided upon and it is really…
-
I know this is a very old post but, was wondering if anyone found a definitive answer. I've been trying to get port info to populate IPAM from ODT on our 3750s but no luck. I get all port info from our 2960s, 5596s, 5548s, 4500s but, not the 3750s. I've added to the config: snmp-server group MANAGEMENT v3 auth context…
-
Thank you!
-
That worked - thanks alot!! Two more questions: How do I create a subject in the email report? and Is there a way for me to get rid of the PDF attachment that really doesn't show anything but the login screen? Thanks, Pat.
-
Randy - how long can the cables be that the probes use. Our Data Center is roughly 50' x 40'. Could I cover that with the one box and 4 probes or do you think I would need more boxes? Thank you, Pat.
-
Damian - what are you seeing and what aren't you seeing in UDT for your 4500s?
-
Where would I put the username and password in this Url? http://mksolarwinds2/Orion/login.aspx?ReturnUrl=%2forion%2freport.aspx%3freport%DailyNodeAvailability_-_Last_Month&Report=DailyNodeAvailabilty_-_Last_Month Thanks, Pat.
-
Randy, How do you connect the probes to the box - is that how it works? The photo from the link is the monitor, correct? And then you have probes hanging off that? How many temp sensors can each box handle? Also, did you have to assign pollers to the device or were they picked up automatically? Thank you, Pat.
-
Under settings I don't Web Console Settings Thanks, Pat.
-
Oh - so, the UnDP needs to be configured on the server and not the web front end? When the UnDP is configured, I can assign the UnDP to a node - such as a FW? With the right UnDP assigned to the FW and Netflow also configured on the FW, I should be able to get trending for SSL VPN connections. Would this trending be…
-
Here you go Holy - I'm assuming it has something to do with the "Reset Conditions""Reset Actions" boxes being blank? Thank you
-
Richard - I have 4500s working in UDT, I have issue with 3750s. Richard where do I find this table? And, how do I apply the buddy drop? Thanks
-
Zach - it worked no problem. Thanks You know of any training or docs for manipulating these SQL queries? I would really like to create some specific reports using the SQL - seems to allow for more granuality. Thanks
-
Darragh - I watched the video. The tool looks cool and I think we could use this. First - how is it working? Is it tying into NetFlow or SAM or both? Is this software able to do this kind of packet inspection at chokepoints or just on the server - meaning is LANguardian getting this packet info from the server or the Cisco…
-
That sounds cool. Could you explain how to create a user account? Or a link explaining? Thanks. The restricted access is so the username and password will not be able to be used for any other function than the reports? Thanks.
-
Thank you Zach
-
I'll give this a try tomorrow and let you know - thanks
-
Randy, Why do you use that particular one? Seems rather expensive. What can it do that others can't? Were you able to tie the sensor to SolarWinds? Thank you, Pat.
-
Could you expalin how I would change my Windows account login under console settings? Is this on the solarwinds box? Thanks, Pat.
-
I'm really new to SolarWinds. Is there a doc that might help me understand the steps needed to set this up? BTW, where do I find the Universal Device Poller? Thanks, Pat.
-
Danielle, I'm very new to SolarWinds - My boss just asked me to find a way to monitor AnyConnect trending as far as amount of people connected, bandwidth usage over time. Where would I apply this script? Also, this script seems to monitor concurrent sessions and not trending. Thank you, Pat.
-
Thanks - Bhamani!!! I couldn't remember how to do this - so simple.
-
Thanks Holy
-
Holy, Here is an example of what I see in the active alerts. These devices are up and have been up for some time. Are you suggesting that in the alert for node down, there is no alert reset being sent to Orion to delete it? Thank you
-
Ismo - thanks for the response. Not sure how to go about extending the values or how this would impact the rest of queries. Could you explain in more detail. I've been pulling my hair out - adding snmp config to my switches. Still have a ticket open with Solarwinds and Cisco and both teams have escalated the ticket but, no…
-
Thanks for the response - we are running 15.0.2. I've done all the things mentioned in the thread. Performed a mib walk on the 3750 switch from Orion and got all the bridging MIBs. I have a ticket open with Cisco and Solarwinds and at this point they are blaming each other. Would really like to make use of this software.…
-
Alois - Some of my dependencies I've created don't work.What I ended up doing was creating a parent/child relationship called "MPLS" between the WAN router and group called "Site Devices". So, the MPLS router is the parent and a group that contains the rest of the site devices, excluding the Internet/VPN backup router.…
-
Thanks Borgan I saw that but, how do I include that in the email alert I have created already? And, the link would have to be dynamic as each alert could possibly be for a different interface. Thank you, Pat
