kurtrh · Network Engineer · ✭✭✭✭✭

I was hoping that they are working on a resolution to the problem. I know I sent Tech Support a lot of captures, logs, etc.. Being that the Nexus 2k/5K is being used more and more, it would be nice for a simple fix.

I sent it to Maria again. Kurt Hashbarger Chief, Network Engineering Division Quantico ITC /Culpeper ITC / NCA Quantico Information Technology Center (005OP6.4.3) VA OI&T Service Delivery and Engineering Office: (703) 441-3073 Mobile: (703) 504-8151

I tired e-mailing you but it did not go through for some reason. Let me know the download link. We currently have NCM/NPM plus others and Cisco SmartNet

Thanks. Appreciate it.

Yes I can.

Do you get the gift if you received one a few years back when you first did the gift card? If not I did not receive it this time.

Is there any plans to make it a client-Server application?

Thanks. Thats what I was looking for.

Appreciate it. These constant alerts on the Web interface are getting annoying to clear out. The only reason we started getting them is because we turned on Neighbor Scanning, due to a recommendation from Engineers. This was so we can get any missing MAC addresses listed on the IP listings.

Thanks. I just created the idea. I know we put the description of the device that is attached to the port, so it would make it even easier to be able to see that description field. We even mark it as do not enable if there is a problem with the port or the item attached to the port.

Thanks for the info. I guess I will install the UDT Poller and VNQM poller to help with the load.

DanielleH I did not get any e-mail at all about the survey or the GNS3. Can you send it to me?

I have it installed on 2012 R2 with no issues. Services start fine. I had to make sure that I installed it as an Administrator, and that I check the properties of the install file to make sure it was not blocked.

Sorry for the late reply. I would like to monitor the analog usage and analog calls going out this gateway. Also any performance issues related to that Analog call going out. Since these are mostly used to handle Fax devices, and security/fire panels, I would like to know when there is any issue that needs resolved.

Here is the odd part, if you use Switchport mapper you are able to see all the devices (MAC address, IP address, VLAN,etc.) just fine, but with UDT you are not able to see that information.

The only items it is showing as not supported are below. I am running Version 7 on the NXOS on these 5k's. Type Status 15 lldpCacheTable NotSupported 16 lldpAddrCacheTable NotSupported

What I am looking for is something in the GUI fashion that you can Enable multiple ports at once, not turn on one port at a time. Also, something we can enable and disable port-security on an interface if needed and to clear err-disabled states. Something similar to Cisco Network Assistant. I was hopping a Solarwind…

Not to steal this thread, but when will the next version of UDT be coming out? There is nothing on the Product Forum right now. Just Wondering.

I checked the logs on both the local Machine and the server and nothing is showing up about it. I also tried another machine and I am getting the same error.

Peter I am installing the Beta and once the installation is complete I am getting an error code of 10049 when I try to pull up the website. I ran into this problem Beta testing IPAM, and someone had to run a script to fix the Busnesslayer so it uses port 17777 instead of NULL.

Is KiWi CatTools going to be developed any further, or is it pretty much dead now?

What is the projected time frame 3.3 will be out?

I would like to see the ability to view if a port is in an err-disabled state or not, and see the port description column. Also, the ability to use in the map tooltips under ports "${PortDescription}"

Was wondering if you are working on the below also. 1. Port Description added as a column. 2. UDT Custom MAP ToolTip Support. 3. Ability to reset an Error Disabled Port after a security Violation

Finally IP Request Form. YES, HAPPY DANCE HERE.

When can we expect the new version to be out for RC?

Sure. I will send you an e-mail.

What about the IPAM Request form, that has been out here for almost 2 years now with multiple votes for it to be implemented. I do not see anything about this IP request form for implementation. If you all want to do some improvements, you need to implement this into IPAM. And using an API to get free addresses does not…

ANy idea if you are working on the IP Request Form???? IT is been voted on multiple times as a needed item.

I filled out the survey weeks ago, but never received the download link for the beta II.