Comments
-
No, the boards on Huawei MA5600T series cannot be used on MA5800 series.
-
Yes, it supports GPON uplink, make sure you select the uplink board with GPON ports, also get the GPON SFP module for MA5616.
-
Have checked the datasheet. Yes, the QSFP28 Ethernet optical port on Huawei CE8850-32CQ-EI switch can be split into 4 10GE ports.
-
Yes, as S6720 is a optical switch, the optical ports will not able to work without SFP module, so you need to purchase additional SFP Module. And there may generate alarm if you use the compatible SFP module, however, it will not affect normal use.
-
1.Connect the PC to the LAN port on Huawei HG8245Q2. 2.The default IP address of the HG8245Q2 is assumed to be 192.168.100.1. Set the IP address of the PC to 192.168.100, which locates in the same network segment as the ONT. 3.Enter http://192.168.100.1 in the address bar of the browser and press Enter. Then, the login…
-
No, OSN 2500 power interface unit PIU is DC -48V input only, but you can buy a AC/DC power converter to deal with it.
-
On the Huawei MA5800 X15, both the control board and the upstream board can be used for 10GE/GE upstream transmission. By default, the device uses 10GE for upstream transmission. You can set the upstream port by running speedcommand. To avoid communication failures, the rate of the upstream port must be the same as that of…
