jjimenez

thanks, i 'll do some tests then

sorry. the service "SNMP Trap service" is logged as i told you. it appears "stopped". "SNMP Service" is running.

the issue was solved. there was an app using the UDP port. we'll move the executable, so it'll use another port. thanks for the help also Hati's help. Thanks a lot

There's some "EventReceiver.exe" listening on the port 162. And is logged as "local service" as the user. i did send to Hati the output.

i want to know if the unmanage utility, when running an unmanage task, affects the availability time of the node/application.

The server is up to date (11/23/2011), but i want to know if there's any requirement regarding OS patches, .NET versions, etc. anyone?

what i meant was, i need the info about IP, MAC, FQDN doing a subnet scanning, not in a port scanning. it's different info for different uses.

The case # is: 251175 i was able to capture some packets using wireshark. right now support is making an analysis over it.

Thanks, i will verify. but please let me know what are you refering when you said: security settings. whose security settings.? thanks in advance

thanks a lot, i'll keep doing research

289129 that's the support ticket number

i think spending 1000+ US for a single additional field in a specific tool is too much. I don't believe adding this extra column should cost so much. It's my humble opinion. I mean buying UDT only for that is not a good option.

Thanks for the info, but it's not the answer. It's about configuring SNMP v3 on Cisco equipment. My trouble is starting a windows service (Server 2003). but thanks anyway

check this app for example: www.softperfect.com/.../ 800 KB

the short answer in NO. I don't need data from the switches, i need data from the LAN. IP address tracker don't give the MAC address, only the FQDN.

Thanks for the info, finally i want to know what is the dependency between the Remote Registry Service and the RPC metod of gathering information. I need to have the "remote registry service" up in order to use RPC? this is for confirmation purposes

i'm looking at this type of event in windows event viewer, under solarwinds. i don't know if it's because a configuration on the nodes (allow 64 bit counters). anyone?

i have NPM 10.2 (without the latest 10.2.1 patch)

Solarwinds staff, could give some advice regarding this issue, since i'm having the same errors, with the bridge groups. i don't see IP nor DNS data of the connected clients to the switch. Layer 2 Log Messages 8/12/2011 11:30:27 AM - Unable to download dot1d Bridge-MIB for VLAN x. On Cisco switches using SNMPv3, the…

thanks a lot for the info. i will do the upgrade.

i was asked to do this since we have in our DB several other Databases from other products. Anytime the Solarwinds database maintenance runs, it alters the performance of the DB as a whole. I know this is not recommended by Solarwinds, but right now i can't chance the placement of the DB. If you can, let me know any…

This is the error: Event Type: Error Event Source: SolarWindsTrapService Event Category: None Event ID: 1004 Date: 11/22/2011 Time: 3:15:07 PM User: N/A Computer: ORION Description: Service Start Failure. Unable to register with SNMP Trap Service for SNMP Trap reception. Try to following to correct the problem: 1. Click…

VMware-esx-mibs-1.0.1-368563[View:/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.10.25.76/VMware_2D00_esx_2D00_mibs_2D00_1.0.1_2D00_368563.zip] please update. ignore if already uploaded. thanks in advance

i'm having the same issue. any help? but in my case is on a catalyst 4707