jedi755

I have been asking for a feature like this as well, CiscoWorks can do this....basically search for a criteria(missing or exists), and then take the search results and execute a job on them...which is usually what you need to do after you search configs!

<Configuration-Management Device="Cisco PIX" SystemOID=" 1.3.6.1.4.1.9.1.451"> <Commands> <Command Name="RESET" Value="no pager"/> <Command Name="Reboot" Value="reload noconfirm"/> <Command Name="EnterConfigMode" Value="config terminal"/> <Command Name="ExitConfigMode" Value="quit"/> <Command Name="Startup"…

if i use v3.5.1, and try to download the config from the 1 device, i get the connectivity message...if i revert to v3.0, it works fine...i have this same issue with another firewall now as well...so im going to stick to 3.0 until the next release.

Thanks for your help, still having issues though. The changeto in the enable command doesnt seem to work since it asks for a password, here is my current trace; -->StateChange: Connecting to server<-- Got HostFingerPrint: 9a:3b:3d:9e:50:0a:1a:ac:d5:8b:89:0b:ab:8d:9e:3a SWTelnet9 Crypto Information Begin Protocol = SSH1…

I have backed out my Software to version 3.0, as far as im concerned v3.5.1 is completely bugged. there are several problems with it, including this one. once i went back to 3.0 the problem went away. 

Show running works fine, the problem is its not getting into the system context. the flow should go like this: login un/w FWSM\admin> enable FWSM\admin#changeto system FWSM# sho runnning

did you take the beta download offline? i can no longer access it. thanks.

has anyone solved this problem? i still have 1 device that all of the sudden started doing this via SSH. 

nm, i see them attached in the beta invite.

haley, can you send me the current release notes for v4?

Hey Chris, I tried this and still not working, here is the trace: -->StateChange: Connecting to server<-- Got HostFingerPrint: 9a:3b:3d:9e:50:0a:1a:ac:d5:8b:89:0b:ab:8d:9e:3a SWTelnet9 Crypto Information Begin Protocol = SSH1 RemoteName = SSH-1.99-Cisco-1.25 SCcipher = 3des CSCipher = 3des Keys = SWTelnet9 Crypto…

that is a weird one, dont think i have seen that before....may want to call TAC.

Still not working, here is my session trace: -->StateChange: Connecting to server<-- -->StateChange: Connected to server - idle<-- Solarwinds.Net SWTelnet9 Version 9.0.27 Connected! --> ******************************************************************************* --> ProcessLogin State: 0 --> ACCESS IS RESTRICTED TO…

I have a ticket opened for the same issue, Solarwinds is aware of it...supposedly they are working on a fix and for now the above mentioned is the only workaround. 

count me in.

I have the same issue with 3.5.1, i can also no longer discover new devices. I have opened a case and reverted back to 3.0 for now.

you may want to also try putting in items like this into your config comparison criteria, so they dont trigger a change detection.

so you are saying when you perform a show run you dont see the above VLAN configs? are you using TACACS? it sounds like there may be a rights issue.

i am also seeing this error now on a device as well, ssh and never had any problems until now. 

Did you get this working? I am having trouble with your template.

this would be cool, since we have a similar situation on one of ours. post back if you get it to work. 

I have also been able to use : ${CR}

4.01

are you going to publish the new features in the beta?

I would like to see searching of configs for keywords that are MISSING, and also to be able to load the results of a search into a new execution script.

yup, everything is as it should be. I reverted back to v3.0 and everything worked fine.

IF you are talking about rediscovering nodes, you can turn on node monitoring and it will rediscover nodes on an interval you choose.

I would also like to see this.

just installed 3.5.1, will report back if the issue has been fixed.

it seems this only fixed it when i run the jobs manually, when i schedule them they still crash