jblankjblank

lynchnigel - this is in the event they are using Network Atlas maps in the groups, which would relate to one of my older posts: Custom Maps for Group Details Page In this case I believe our topic is Orion Platform 2018.2 Improvements - Chapter Two - Intelligent Mapping

12.3.

Thank you mesverrum​ really good info. 

@"david.cramp" - The connections represented in Orion Maps are based on the connections discovered and identified in NPM. It might be good to take a look at the connections identified through the NPM Topology Widget. Typically this can be found by default on the Network Tab of any details page. If there are unexpected…

Hello @"Jason_TF" - When the Node is in a Critical state it is usually due to either a threshold setting or a child object being in a poor state such as an interface or volume. It does not mean there will be an Alert or Event unless you created one to trigger based on those thresholds. If you hover over the Node name what…

@"SamNest" - Curious - Can you clarify or elaborate on what those elements on the map are and what you are hoping to see?

@"dharmbodh" - This is not something that I can validate with the above information. The one scenario I have seen this occur in was due to lack of CPU on the machine. I am not sure what you have allocated there. If you are working with an eval, I would recommend asking your Account Manager to get a SE involved to assist.…

@"deverts" - Certainly - there have been many examples of this. I describe a method for accomplishing that very ask in this post: https://thwack.solarwinds.com/t5/NPM-Discussions/Orion-Maps-and-MPLS/m-p/609104#M150168 I will also just share it here - When you connect your edge device to the image through "Connect Objects",…

@"cggkevin" - The Map in this case will always visualize a single connection between two entities, and roll-up or show the connection with the "worst" status. When selecting those links in view mode - the Inspector Panel will slide out where you can see all connections between the two entities and their performance data…

@"paulsharman" - This is a known feature request and is being investigated. We hope that this can be added in a future release. https://thwack.solarwinds.com/t5/NPM-Feature-Requests/Orion-Map-Resource-allowing-per-Group-Map-Selection/idi-p/561902

@"k1gaudineer" - the Contextual Map sub-views are dynamic and updated for you. This is so that users can understand what NPM sees as far as connected entities and topology without any intervention necessary. Are you hoping that when you build a custom map, that map is then automatically added to any node details pages that…

So I assume what you are trying to do is create and simulate a connection when you are only monitoring one side of the link? When you connect your edge device to the image through "Connect Objects", select your interface that you want representing that connection. Then select the image and choose the exact same device and…

@"egas" There are lots of ways to accomplish this. I should note however that in order to access the VMWare Cluster data, you will likely need the Virtualization Manager Module installed. You may choose to use a Custom Chart or Custom Table widget, define the data-source, and then choose some options for how you want to…

@"odaroj" The options for Dashboards are very similar to those available within a standard instance of Orion. This is really about giving you the flexibility to highlight what data makes sense to your organization. This often varies from company to company so there are no set flavors. I do show a few examples in the 2020.2…

@"roadcycling" - I apologize as I am not sure what you are asking. Orion Maps is a web based tool. Are you having an issue accessing that tool for some reason?

@"roadcycling" - For clarity, when you say new module, are you referring to Orion Maps? I would ultimately consider this a feature, not a new module as this enhancement comes at no cost and is provided through the platform. If that assumption is accurate, my second assumption is that by restoration you may be referring to…

@"hansolo" - These are all great suggestions and ideas and we are considering improvements in many of the areas you touch on. Unfortunately we are never able to share timelines but I do appreciate the feedback and details. 

@"ianleggett" - you should be able to do this no differently than you would for a report based on Nodes or Interfaces or any other object/ entity in Orion. Based on how I am interpreting what you are asking, I would recommend you utilize the Custom Table widget either on a view or in a report. When configuring the table,…

@"ed.selig" There is not a migration tool currently available to port Network Atlas Maps to the web-based Orion Maps. There have been many discussions on this and it is a well known request, however I would recommend submitting a feature request for others to vote it up. It would be great to hear more about your…

@"edvrfn" - taking a quick glance, in order to chart those items, you would have to create individual pollers rather than going after them all in bulk through the table. Certainly as you demonstrated, you may want the current values in a table format like you have in your image. But you won't be able to chart the table as…

@"sreenathmp" - I demonstrate how to accomplish this in an older post you can access here. I also discuss that in the most recent map post and in the comments too: https://thwack.solarwinds.com/t5/The-Orion-Platform-Documents/Orion-Platform-2020-2-An-Orion-Map-to-Success/ta-p/587146 I have copied the excerpt below: Now,…

In your screenshot from the device you are showing 10.0.7.50, and in NPM you are showing 10.0.2.96... Perhaps you need to change the interface? Why not also use V2 over V1? You could also try to run the SNMP walk tool from the Orion Server to validate…

@"lufffunk" Just to validate - AppInsight for AD and the Replication Widget do not create a connection automatically in Orion Maps alone. In order to have Application Connections showing, an agent running on each of those systems is needed. Then the following is enabled under properties for the node - If you have enabled…

@"mjperkins" I added an update to the post above which covers it. To answer your question, Yes - download the iso, run it, you have two options, the installer which brought all the files it needs with it, the appropriate files for your environment will be copied and moved to the installer folder, an update to the SWA…

@"hernandez.julio92" In Orion Maps you have the option to hide connection types but not individual connections. This would be a feature request.

@"roadcycling" If the owner or admin deleted the original map, there is no method to restore it. 

@"jakegevans" and @"alephtav" - special mention and thanks for sharing the info you did. Some specific work was completed which should have resolved any checksum errors and we also made some enhancements to improve the transfer reliability between the primary and scalability engines. There are other improvements that were…

@"Seashore", @"ecklerwr1", and @"mjperkins" - hope you guys noticed the new update! As of 2020.2.1 release, pre-staging for offline environments is now available!

@"hallstev5" Do you happen to be using Internet Explorer? Have you tried a different browser?

@"jgrobinette050" - Really appreciate that comment and very happy the information shared has been helpful. Thank you.