jamesatloop1

Yes, duplicate and edit the existing alert. Under trigger condition, tick the box 'condition must exist for' , the default is ten minutes.

Go to NTA settings from the nta summary screen and select NTA sources. Select all from the drop down and deselect all the devices you dont want to show leaving the valid devices.

Well if the vpn's are configured on an asa, then solarwinds natively supports vpn monitoring, if not, oid for the device and custom node poller alert.

udp port 2055 towards solarwinds server at desired rate.

You can still use your existing if you move the licenses. Other wise i would uninstall.

Yes it would be perfect because it polls from the site and sends data back to application server which will get around your latency issue. The difference between the standard ape and rop is the licensing which can be purchased specifically for smaller numbers and does not have to conform with the main poller.

Cool, how did you get on?

Well you are going to have an issue there imediately because there is no such thing as an active or informational alert. There is only active alerts and events. So what you really want is either active alerts or last events. You can put this on the home screen by going to customize page and searching both mentioned when…

Go to settings and then tasks under request types. You can log a call automatically with the patch detail on patch tuesday, better than outlook!

Tick the subnet from the manage ip's and subnets page and edit, the scan interval is near the bottom.

You cant. The nature of bios updates these days are windows executables and when windows shuts down, there is no mechanism to input the bitlocker password without human intervention.

Hi Moha, The first place i would look is the fragmentation on the database, when was the last time indexing ran. Is your database on the same server as orion? Do you have nta and if so, is it on the same server? What is your license and how many interfaces are you monitoring. I have used npm 12 and fund it way faster than…

To be honest you have not given a whole lot of information here but assuming your using cisco, use the universal device poller app on the server to poll the following id. CISCO SWITCH ENGINE Tcam Usage Table 1.3.6.1.4.1.9.9.97.1.9.1 Other than that you realistically have to give more info.

Log a ticket with solarwinds id say but looks like firmware. Have you checked out what the actual oid is for your MIBS. Also have you confirmed that all members have the same firmware version?

No bother.

Judging by what you have posted above, it would indicate that your cpu is running below 3GHZ. If this is the case you need to ramp up the cores to compensate for your lack of frequency.

No, for db use appinsisght for sql applications, database section not the applications section which i think your using, please verify the template first.

Yes, go to settings, all settings, manage dependencies. Add new and select the applications by parent and child......................boom

Go into license manage if you can and deactivate all your licenses. Open database manager from the start menu and add default server. Right click on your solarwinds database and select new query. input the script below. Reactivate your licenses. If you cannot connect to the license manager, then run the script and log a…

Yes as long as the ports are open to the dc on azure across the wan.

Your better off going to messages in npm and filtering the data by device there. Messages has better filtration and you can filter by date as well.

Its a no, im afraid.

You should always leave the default values in undp. If they are not showing on the website then go to customize page on the node details screnn for the device and add a couple of more charts when searching under universal including the multiple universal device poller chart. If nothing still shows then go back to undp and…

For you it would be 135, 445 and 17777. Also make sure you have admin credentials in your credentials ring that allow access to the client, domain is best.

You will need to provide more information than this because sql memory is natively high on all sql servers, its dynamic and only gives back when something else needs it.

Upgrade all your modules first before applying any hotfixes. The hotfix is always the last to be done. You will get comparability errors otherwise.

NTA is the answer and it does store them with retention periods. Your just interfacing a different way.

cool.

Should not need an agent to be fair, as long as snmpconf -i has been configured correctly for all oid with no restriction and service snmpd restart has been run, you should have no problem doing an snmp walk.

I would get onto ibm, this is weird behavior in my view. When i did it i had no problem in retrieving values.