iceman

Thanks Issac. Downloading Tracker now.

Thanks Issac. One thing I've noticed, is that the 1 minute mirrors the 5 minute samples. I assume it's because the MIB on Cisco Device gives out 5 minute averages. Mike

I belive by default the tunnel interface is 9K. You'll need to change the tunnel speed to reflect 100Mbps.

Just an update. Flow Tracker does not support the CAT 3550's for flow-control (per vendor) Will try this on the 6513's.

Thanks Issac. We are exporting Netflow from two 3550's to the Netflow Tracker Server. One 3550 is in DMZ and the other is in the Backend. The information to this point is useless. We were hoping to catch conversations between the DMZ and the Internal networks, but no dice. We only see Gateway and Broadcast info. I was…

Hi. This is more of a Netflow Tracker Support ?, but having issues seeing any data being exported from my 6513 (running hybrid btw) The CAT tells me data is being exported. Here's the output from the CAT CLI: rv-bp-ifsw-01> (enable) sh mls nde Netflow Data Export version: 7 Netflow Data Export enabled Netflow Data Export…

Ha --- Thanks Issac. One of our Admins did some research on MIB issue. It appears Solarwinds does not use hrProcessorLoad and relies on the ssCpuIdle counter. Unfortunately the ssCpuIdle counter is deprecated and does not work in Linux (and not recommended at all with net-snmp), From net-snmp.org…

Thanks Issac. Do you happen monitor Linux Servers with Orion? If yes --- What version of NET-SNMP are you using? If I had to guess it almost appears Orion asks for CPU% once and never again.

Additional information: We are running Net SNMP 5.09, which is the recommended version by Solarwnds support. Below I've listed Linux information. 2.4.21-20.ELsmp is the Linux Kernel version Red Hat Enterprise Linux WS release 3 (Taroon Update 3) I'm hoping someone within this forum is running Linux and monitoring CPU and…

We have another monitoring product called Hybodus and it reads the Linux CPU with no issues. This is a serious issue with Solarwinds.

Doug How did you resolve this? Thanks

SW support tells me this is not possible with their Syslog Server.

Move from CATOS to Native IOS. This will solve your problem.

A sniffer based tool would be great.

Thanks Issac. Are the Management Packs integrated with the Alerting System or is that still being developed?

I have the same problem with reboot alerts. The alerts are old and outdated. I called Solarwinds support, but they had no answer.

We have Dell Servers running Linux. We have installed NET-SNMP 5.03. Solarwinds sees the the CPU %, but the % stays static never moves up or down. Has anyone seen this issue?

Thanks Network_Guru. The discards are only indicated on our peak times. During Off-Hours including weekends NO Discards are indicated. We have a Nokia Firewall. Both the gig interfaces share a common controller, so Nokia suggests moving one interface to another controller. We're doing that today. Our issue seems to be…

It's also very fustrating for us to maintain our 6500 interfaces. In fact to combat this, we are moving from Hybrid Mode to Native IOS. Eventually Cisco will dump the CATOS to force the same thing.

Hi Bix, Did you ever resolve this? I'm also intrested in this. One of the main questions I receive is how often I hit a particular %utilization. Thanks