ice

That OID are embedded on the MIB database and the core polls it to that database to request the SNMP information, I believe it can't. The way that I see it is either all or nothing (to poll SNMP). If you think this information still is not correct, you may open a support ticket and check if that will be possible.

yes, it will go over 100%.

can you post here the interface details page for that issue - that still shows 100MBS after custom bandwidth set. Also the chart for the Percent utilization.

go to the interface details page for that interface - Edit Interface tick Custom bandwidth set the TX and RX to 100 MB save the settings

yes just the string. no need for any information

Nope, it does not have that feature - i'm talking here about NPM.

1. Was it working before? A: Yes I've done a capture with wireshark but got no packets regarding "CFLOW" packets. - if you are not getting any Cflow data then, it is a configuration issue or access list policy (in case over a firewall). 2. Do you have other node/interfaces shows netflow data? A: Yes I have others devices…

No worries. I'll wait on the result on the packet capture and let us see what you are getting. - Open Wireshark - Click on Capture on the tool bar and select Interfaces - Click on Option for the interface used to poll your devices. - In the capture filter type the following: ip.addr==xxx.xxx.xxx.xxx - Please replace the…

Yes, after you define the 1st line Node is equal to down (simple condition) >> add another line but select Add Condition Group and change it to ANY and define all 3 lines with Simple Condition.

now, there are 2 types of report Origin - Web base and Report Writer (viewed from Orion web console). To view the SQL content of Report Writer Origin report - you can still view it on Report Writer (RDP Orion Server >> Report Writer >> select the report >> Report (menu bar) >> show SQL). For Web base report origin - there…

That is also a question i have since i used Solarwinds and I was also using it when I still do not understand how it is used. But i learned it the hard way.I would guess that the Type of Property Custom Node Poller or Custom Node table Poller alert - queries also some information on the nodes table like the Node ID, since…

Hi Yes, please check what janene16 is asking 1.3.6.1.2.1.31.1.1.1.1, see what do you have.

I do think there is Richard Letts Orion polls in bulk information via SNMP. You may try the Manage Pollers on Orion web and see if your Aruba shows up on the pollers there.

yes...If you will access that path - it is the general folder for reports. Creating a folder on that folder limiting the user that he/she can access only the content on which folder he/she has assign to. Also he/she can also just save on that assigned folder.

you have to check if your devices are detected by layer 2 and layer 3 topology "and" those devices supports on it polls for NPM topology. Check the link. Then run SNMPwalk on sample devices you have and check if your have those OIDs

If MS Lync uses SIP - this is still not possible.

You can post it here bro. VoIP & Network Quality Manager Feature Requests

mine also works. nice query rukawarei

This usually happens on Windows 2012 due to permission issue.

removing the interface by list resource retains the interface information on the database and its multiple dependency on other interface table. This will cause conflicts on generation of reports, alerting issue and other function that uses mainly on the database. For now you may not see that issue, but in the long run,…

what Solarwinds Application you have and how many alerts you have enabled before the upgrade. I say give it another day and if not. I suggest to open a ticket for Solarwinds Support.

That SQL tab will only appear if the Report Template is "Advance SQL" template. Check on New report >> Advance SQL.

You can do it via Orion Report Writer. When you choose new report, you can use Current Node, Interface Status. This should bring your those information except "netflow version" and any other information on netflow. That SQL tab will only appear if the Report Template is "Advance SQL" template. Check on New report >>…

NTA 4.2

I think it is still not yet supported.

ah i see. that is great. what NPM version are you using? those variable i gave is for NPM 11.5 and above. I believe you are on NPM 11.0.1 and below. but glad you were able to work it out.

try these to put on the alert action when it fires that it started being unmanage: ${N=SwisEntity;M=UnManageFrom} ${N=SwisEntity;M=UnManageUntil} 

it was a known issue on cisco

yes

Hi, NPM uses certain sets of topology to poll the connection between layer 2 and layer 3. Running SNMPwalk to your juniper devices and check this link below show if your device supports the topology that NPM uses. SolarWinds Knowledge Base :: What object IDs (OIDs) does the Orion Platform poll for network topology…