harrijs

I have been somewhat vocal on IPAM and Infoblox integration before and just wanted to voice my desire for this again. I believe that we are going to find it difficult to maintain the feasibility of our Solarwinds IPAM license without this integration moving forward.

Something else I am just now realizing is that this will only work when adding nodes from a network discovery. We don't use discovery here and instead add servers and/or network gear manually. This filter ability is useless to us. We want a way to globally say "ignore Null0" or "ignore WAN Miniport" so that they never show…

I would be all for this in SAM. For now I guess we are going to try and use LEM.

I would love to have a filter list of interfaces to be ignored when adding a new device or scanning an existing one. The Null0 interface on Cisco devices has always been the one that has bothered us. Since we have started monitoring more servers in our environment this is becoming a nuisance in the node lists since they…

Is restoring from the most recent backup a possible solution to this? It may not be viable in all environments but would work well in mine if I happened to do the same thing.

Since this has been marked as "Implemented" could someone from Solarwinds give a little more detail as to how it was implemented and/or a link to the documentation that shows how to enabled this feature?

We have been running NPM since v7 and I agree with all of the points made so far. The reactive to proactive paradigm shift is immensely healthy in an environment where you have tight tolerances on outages. For someone who will take the time to immerse themselves into the data that has been collected over the course of…

We also rely on custom properties for our NPM and IPAM configurations. These are mainly used to group and deliver reports. Since we have started distributing the management of nodes beyond the SW administrators, the population of these custom properties is more difficult to enforce. This is a must have feature in the next…

Have I missed where the new interface filtering funcitonality was documented? I have 10.5 installed but can't figure out where to setup the interface filtering.

We (the communications and security) work closely with the storage and systems administrators so there usually isn't a problem with us getting together and working a problem to a resolution. Typically we run into the most problems when working with the developers who seem to have a great deal of knowledge about their…

As an update to this old post, we did decide to let IPAM renewal go. Without this integration we could not justify having two different IPAM solutions.

I would also like to see this natively supported in future versions of NPM. I have attached an snmp walk from one of our WAE-674-K9. You will need to rename the file extension from .cs to .csv since I couldn't attach a .csv file.

I find that I am in the same place as everyone else. I have installed SP2, but it still takes between 30-50 seconds to load our Summary page. This was reduced when I removed All Nodes resource to abour 15-20 seconds. This is still pretty discouraging. We are only monitoring about 200 nodes right now. I do have the NetFlow…

I am also interested to know what the status of this enhancement is.

Haley, Thank you for your help. It was a problem with my device login credentials. I did not have an enable level specified since most of my devices are using TACACS+, which logs me into a enabled mode. Once I set the enable level, everything worked just fine. Thanks again.

 Haley, After looking at the session trace, I can see what the problem is. The firewall is being logged into in user mode. There is not ever an attempt to enter enable mode. This is the reason that the show run command is failing. What is the best way for me to tell the DownloadConfig variable to enter enable mode before…

 36411

 If the DBA's are going to have to go in and manually truncate the netflow2 table, why are we keeping the data anyway? I thought that the point of Netflow statistics was to be able to store them so that we could come back and look for trends. This only makes sense if we could keep at least a year of statistics. We have…

Mark, I have made the appropriate changes, but this still isn't working. Below is the modified template. The returned error details are below. Error: Type help or '?' for a list of available commands. Template: <!-- edited with XML Spy v4.4 U (http://www.xmlspy.com) by Brian K Rogers (Solarwinds.Net) --> <!--SolarWinds…

Is there a solution for this yet? In my opinion this is a loss of funcitonality compared to earlier versions.

I would like to chime in on my desire for Infoblox support also. For the same reason that is stated above, we already have an authentication mechanism in place within Orion for everyone who needs to manage subnets in their AO. If we used infoblox, this would be another place that we would have to maintain authentication. I…

 Here is the thing. I don't have access to the DB or any DB statistics. We have DBA's that manage this. They are stating that the database is too large, and it needs to be pruned. I need to know what I can do on the Orion and/or Netflow settings to reduce the size of the DB. If this means reducing the amount of time we…

I don't think that will work because each command needs a Command Name and a Value. It looks to me like you simply stated a Command Name and no Value. For example. <Commands> <Command Name="RESET" Value="no pager"/> <Command Name="Reboot" Value="reload noconfirm"/> <Command Name="EnterConfigMode" Value="config terminal"/>…

I have opened a ticket. #27156 I have never run diagnostics. Could you please elaborate here and I can add it as a reply to the original ticket confirmation email. Thanks.

Thanks for the update. More than anything, I was just curious to see if the plan was going to require additional capital expenditure from customers to use the web toolset.

How do you run a repair on Orion?

I didn't look for anything in the forum. I was looking under the customer portal. Thanks for the link. Can you provide any input on the other points I addressed in my post? Thanks.

I just started noticing these messages over the weekend. We have been running 10.2 RC4 since it was made available. My DBA just informed me that these are all Netflow tables and as soon as he re-indexes them more become 90%+ fragmented. Has anyone else observed this behavior?

Where else do I need to look for the sysObjectID? That is what NPM reports when I add it using SNMP and ICMP polling.

I just did a walk on some of these OIDs and they return unsupported. This particular 2960 is running 12.2(50)SE3, which is an older IOS. We may upgrade a lab switch to a later 12 version and see if this is corrected in the device.