ge0rge

Comments

  • Hi Chris, just an idea has just ocurred to me. I plan to download and save only changed configs every day at a certain point during the day (a scheduled job). Each config change as defined by our company policies should have a change request number (change ticket number). Each engineer will have to change the name of the…
    in New features/ideas - attention of Chris Comment by ge0rge July 2008
  • Hi Chris, Many thanks for your reply. I want to generate a Config Change Report on each device comparing the last two downloads, the last two downloaded running configs or the last two startup configs. I look forward to your reply. Cheers, Jiri
    in New features/ideas - attention of Chris Comment by ge0rge July 2008
  • Hi Paul, many thanks for your reply and the tip. Yes I have Cirrus configured as the authorized manager on the HP switch. It does the same even if I remove the "managemnt-vlan" command. SNMPv2 works fine - so it seems to be related only to SNMPv3. What is your email address so I can send the packet capture? Many thanks…
    in HP J8693A ProCurve Switch 3500yl-48G SNMPv3 - SNMP Security access violation Comment by ge0rge July 2008
  • Yes, definitely, this feature would good to have - remember the more features and freedom you give to the customer the more appreciated the product will be. Cheers, Ge0rge
    in Config line comments Comment by ge0rge July 2008
  • Hi, thanks for your reply. I do not think it happens only once for each interface. It is very annoying since we have a couple of 4500 series switches with enabled netflow for bridged traffic. Per Cisco the switch uses the vlan interface as the source and destination interface for the netflow purposes = the L3 vlan…
    in A Netflow data stream from an unmanaged interface Comment by ge0rge May 2009
  • Hi Chris, thank you very much for you reply and the tip regarding the user defined commands/variables. To answer your question 1. "Just to clarify, you want to compare recently downloaded against the last 2 downloaded configs?" Yes you are right - the last 2 dowloaded startup or running or just simply the last 2 downloaded…
    in New features/ideas - attention of Chris Comment by ge0rge July 2008
  • Hi Chris, sorry for the late reply. Well TFTP works for me now even if it does not recognize the OK and Error messages. Telent is still very very slow. Could you please have a look at the following Telnet session trace. I wanted to upload the following config commands: Which took me 2 minutes. Whe I try to upload an entire…
    in Re: HP J8693A ProCurve Switch 3500yl-48G TFTP Upload/Download failure Comment by ge0rge July 2008
  • Hi qubj, This is just to let you know that you are not alone. We have exactly the same problem. I think I posted something here about one year ago but I did get an answer. I will try to raise a support ticket for that. Regards, ge0rge
    in Netflow data post WAAS optimization Comment by ge0rge February 2013
  • Hi Guys, any ideas? Thanks, Ge0rge
    in HP J8693A ProCurve Switch 3500yl-48G SNMPv3 - SNMP Security access violation Comment by ge0rge July 2008
Avatar