ecornwell

That's the perfect example, steel blues is what we use! I can see the benefit to both and maybe after using the other one for a while it would be ok but it's hard to give up the blues...

Here's a few more: 1.3.6.1.4.1.9.1.1025 WS-C3560V2-48PS Cisco 1.3.6.1.4.1.9.1.959 IE30008TC Cisco 1.3.6.1.4.1.9.1.1021 WS-C3560V2-24PS Cisco 1.3.6.1.4.1.9.1.877 Catalyst4510R-E Sup6E Cisco

I was afraid the old .resource files would go away. I did something special where I took the code from the interface details Min/Max/Average bps In/Out resource and put it in the Current Percent Utilization of Each Interface resource so that we could click a single link and get a current graph of each interface. It ended…

It does seem much faster. While you're looking at things, I think it could be helpful if either of these two things were available: 1. Searching within the grouping (being able to search outside of it is still needed.) 2. More complex searches, search by node and interface as an example.

I ran the tool and looked through the VoIP service log and here is what I get: 2008-01-27 19:46:04,773 [6] DEBUG SolarWinds.Orion.Voip.Service.Service - { OnStart entered 2008-01-27 19:46:04,804 [6] DEBUG SolarWinds.Orion.Voip.Monitoring.AppContext - { Initialize entered 2008-01-27 19:46:08,352 [6] DEBUG…

I don't suppose there is anyway we could get that any sooner is there? We have a custom report built to do some Life Cycle managment and the devices that are showing "Cisco" are messing with our numbers a bit.

When I was doing my testing a few weeks ago, I was able to just use a "Small Instance" which costs about $0.12 an hour. That ends up being about $88 a month for a single instance (if you have it running all the time). You can get a cheaper per month price if you pay for a reserved instance (you have to pay an upfront price…

The last time I noticed it I had just added 2 48 port switches. I have my page value set at 60 so I was doing probably about 50 or so. It veries how many actually went through. Smaller groups don't always work either. One time I did about 10 and only about half went through.

Thank you! Given the weather here... you might want to use a 4x4! :)

Here's another issue I've seen with report writer. I tried to format the date to a specific format and it worked in report writer but the web version showed incorrectly.

Interesting... I set it for both the Node and the Interface Level. It would be really neat if it hid like the UnDP does for objects that weren't getting NetFlow Info.

Ok, I'll play with it to see what it looks like.

How many of you have multiple pollers? Now that SW has changed the licensing, I was thinking about moving the APM polling to poller bound. We only have about 200 pollers right now but I see it growing in the future. Our main NPM server was taking kind of a beating with APM, NTA, and over 9k interfaces. 

I think that would be great!

Can that be added as an enhancement request? It would be great if we had the option to select the state. Uknown shows as up or down.

I use the following: ^! ^! NVRAM ^! Last ^! No configuration change since last restart ^ntp clock-period Although, I think the first one should cover the next three.

Yes, I saw the Syslog option in our ESA as well. The Webroot logs do have the syslog option. I'll try those. Are any of the other logs recommended?

I may be reading things wrong but from what I've seen, the table does not exist if there is no data in it. I've used GetIF for a quite a while as a mib walker. If I put in the top level OID of the table and do a walk, I get no data back. (The level I specified in the UnDP.) When a phone fails and I walk from that mib, I…

I went into Settings then Sites, selected the node and hit Delete. Went throug the next screens and submitted. Waited a couple minutes then went back to sites and re-added the device. (The name didn't change, just the IP.)

I was in writing a report the other day and this happened to me a few times. I was able to reproduce the problem. 1. Add a couple of fields 2. Have a field selected 3. Right click on another field and select Delete Current field This is going to sound dumb, but it crashed everytime on me the other day when I was doing that…

I understand. I've seen more requests for the SLA stuff than the VoIP stuff and you'll be able to hit a wider audience for the SLA. I was just hoping for more Cisco VoIP realated information. (I want to be selfish! :o) )

Thanks Yann! I think this could be very helpful once I get time to troubleshoot a little more. It should be interesting to see how this translates to a SAN. 

That seems to have worked...

Sorry for the delay... I opened a ticket with support and ran into another problem with what I'm trying to do so I thought I'd come back to this since I hadn't tried it yet. From what I can see, I can limit my view based on custom properties but I can limit my view of custom properties. 

The funny thing is none of the interfaces are checked. The only thing that is checked is the VPN Tunnel interface. 

You have to manually assign nodes when you set them up. There's also a load balancing tool that you can use to specific the nodes and their poller. The install is pretty simple. I had our 3rd poller running in about 45 minutes after getting the server.

I guess you could say we're using option 3... We have our NPM Servers as hosts on our ESX Servers and our DB is a Host on our ESX Servers as well with all the storage being shared.

Do you have NCM installed on the same server as NPM? If so, you can use the NPM Syslog/Trap service to trigger the RTCN. (That's how we're using it and it works great.)

One thing I'd like to see is the ability to make a change to something that doesn't affect the sla and not have it re-apply the sla. For instance changing the response warning and critical times and not have it re-apply the sla. 

Yes, but it's not really sharing. The web-console pulls data from the database and both polling engines dump data into the database. From a web console point of view, the additional pollers are transparent. (You can see stats from specific pollers and when you add devices you pick the poller but that's about it.)