danielgilbey

I'd vote this up several times if I could. I'm surprised that this isn't already available. As mentioned, it would be ideal when you have a large map to display (amongst other things). Hope to see this functionality soon..!

Yep, voted for, would be ideal to have this in place.

Hi aLTeReGo‌ Yes, yes I would be interested in this... once again, Solarwinds have seemingly 'read my mind' I'll prob wait till this is out of beta however, but this does look to address the issues that I am facing. Thanks!!

Came here looking for the exact same thing, also had a look at some similar threads on the boards here (without much luck unfortunately)...

This is why Thwack is great! Came here for just the above & within a minute, I have what I needed! Thanks for sharing bluefunelemental‌ On a side note, if you have AppStack, this also shows a count of group objects....

Great post! Thanks

It's mentioned in the post that you've "changed my default Label to the following variables" ${caption} ${machinetype} ${ip_address} etc I've looked in the Atlas settings but cannot see a way to do this? Am I just mis-understanding this point whereby you mean that you amend the standard label to include the variables once…

Hi Cliton, yeah... that's pretty much what I thought but appreciate the clarification around that I've implemented the use of variables on several maps & find the use of variables on these immensely useful. Cheers, Daniel

In addition to all the above comments, great blog/post/information! Thank you, just what I needed to find out!

IBRIX support would be great with Storage manager, also, HP P2000's

Thanks aLTeReGo, this is very useful & now that I've seen you put this here I remember having seen this on some of my other monitors I have in place. The custom properties however... would you be kind enough to outline where I can add these from to the app pages as when I look in the 'customise page' area, I can't seem to…

Just had one of our Network team come & advise me (happily) that he'd got the Tunnel interfaces on one of our Palo Altos into Solarwinds (PA running PANOS 7.0.3) & while we can add the tunnels & Solarwinds 'sees' them, they show as down (when they are, in fact, up) & collecting statistics... ? Anyone any thoughts on this?…

Hi Glen, Thanks for pointing that out, I was wondering how long it would take someone to spot the 'deliberate' mistake... haha I've recreated the request in the NPM area just now. Cheers, Daniel

Yes, thank you for this, The only problem I've come across with this is that it works on ALL the servers, I don't seem to get any issues on the servers which Solarwinds was having trouble with... As mentioned though, the parallel solution I have in place is working fine. If I have a brain wave (or similar), will def post…

Good morning, Ok, I ran this again against a known working server & get the following ExitCode : 0 Name : cpsvc ProcessId : 12852 StartMode : Auto State : Running Status : OK Stupidly though, yesterday I ran the command on my desktop completely forgetting that it wouldn't even reach the server in question. With that in…

Ok, just tried this & I get the following, I know someone will read this & ask whether I've left the chevrons in when running this, I haven't. Server name removed to protect the innocent. get-wmiobject -class win32_service -computer <compnameremoved> -filter "Name = 'cpsvc'" Get-WmiObject : The RPC server is unavailable.…

Definition of the template is as follows, have omitted certain information. Windows Service Monitor > cpsvc (Citrix Print Manager Service) & Spooler (Print Spooler) > using WMI fetch method If further (more detailed) information is required, let me know.

Ahh.. ok thanks for the reassurances (around the moderation aspect) I'm running a couple of versions behind, NPM is 11.0.1 & SAM is 6.1.1 - I'll be looking to upgrade (just so busy atm!!) HolyGuacamole‌ thanks again for the great responses, appreciated!

Ahh... ok, I'm with you now. I don't have a great deal of experience (or knowledge) of WQL in order to do this, if you've some input or examples I could use I'd be happy to put them to the test & post results here? Otherwise, thanks for getting back to me, as mentioned, I have a parallel solution running so am not overly…

Hello again, apologies for late response, we have ~1500 devices ETA - I did however find a report that allows me to view "Current - Hardware Status" & this proved useful in determining Physical devices...

Hi both, thanks for the responses ref this, I doubt I'll get round to using an SQL query to tidy this up (at least in this instance) but it's good to know that that is a possibility for future reference. Ref using WMI polling, will certainly look into using that & perhaps get some side by side comparisons going, it's such…

I notice all my replies are currently 'being moderated' ? Have I done something wrong?

Hi Jiri, Thanks for the info, you learn something new every day .. I've sent some diagnostics over to support ref this & am awaiting feedback, I suspect that it will be a case of uninstall > reinstall however, let's see what the team there come back with. Thanks, Daniel

Hi Deltona, I do have instances of this running which use Domain accounts & on these locations but I'm not seeing the same issues. Fingers crossed I won't... I'd suggest that, if you are seeing something similar (with Domain accounts), that you get a support ticket on the go and/or try the above remedial actions as well ?…

Guess I need to upgrade, it only shows as " ${N=Alerting;M=DownTime} " within the email reset notification (or am I missing something here?) When you say latest version, are you talking about SAM ?

Hi joe.tran‌ Yes, I've checked with other users & it's a mix - some get the date in the UK format (dd/mm/yyyy) & some get the American format (mm/dd/yyyy) On the Orion server itself, while local regional settings are set correctly to the UK English (with date/time formats as to be expected) when browsing the site from the…

Back again, haven't managed to get a spare moment to raise this with Extreme as of yet, however have perused their forums & came across this potential nugget of info here - worth pointing out that these relate to ExtremeXOS https://community.extremenetworks.com/extreme/topics/problem_with_cpu_and_memory_monitoring_mibs Am…

Hi Jiri, thanks again for coming back to me, looks like we have a winner!! Appreciate the reminder about config file btw, that looks familiar but I don't think (after the other steps you've suggested) that I need to amend that... So... since you asked, yes, we do have specific Proxy type settings in place, seems these…

Appreciate the replies, thanks again, however, I don't know how I can stress this enough, the application monitor does work, I have no concerns over it's validity in doing what's it supposed to do. As mentioned, it works fine across %90 of servers it's associated to, however, one of these (which for all intents & purposes)…

Hi Rob, I'm not certain what I'm trying to do either Essentially, we've been 'given' another DB & been told "here, see if you can use this the same way you use the NetPerfMon DB?" So, Orion would be looking at both of these & then be able to perform all the actions/functions etc based off what get's written there.. Like I…