d-moore

Greg Can I now re-install V10 and use the Regsvr32 "trick" to get V10 to exist with Opm 8.5.x? I removed V10 to see if that would fix my earlier issue.

This does fix it. Great work QA Dept! * Open a command prompt * navigate to %program files%\SolarWinds\Common (usually C:\program files\...) * run the following command at the prompt: * regsvr32 swlogo.ocx

Just a quick one ..... Anyone else have an extended delay on the install when it got to - Processing NetFlowDatabaseScheme.dbConfig file .... Seems mine has been sitting there for about an hour or so?> Just wondered if this was normal Note: Database is approx 47GB I get the same error. I did a repair and nothing. my DB is…

Thanks, that is what I am going to check next. The box is running Win2k with Sp4, but it is a beefy box.

Update: V10 removal did not fix the problem, I knew it was wishful thinking. Monday will start the "repair" process. 

opened up ticked, uploaded diag files. waiting on support

Not pretty but I did this. Setup a Span port on the switch. PC has two NIC's one nic has IP on it, other is using "raw" mode to pull packet. Raw mode NIC put into span port. download this cheezy program "SmartSniff" www.nirsoft.net/utils/smsniff.html . No, you don't want WireShark. With smartsniff you can have it run and…

not possible to upgrad to Opm9 So it would seem that V10 does have issues with OPM V 8.5.x. Earlier toolkits did not have this issue. No mention in the release notes that this issue could occur. I hope that me and one other person are the only 2 out of 1,000's that have this issue. My suggestion to anyone stuck running the…

That is what I do now. I only download changed configs. However, running that job to export configs did it in about 90 seconds. Trying to do it manually via the gui never worked. I was able to put your advice to work. Never saw that job in the list of jobs. Thanks for pointing it out.

Fixed!!! Way to go QA Dept!!! 

Running the 4.01 release. My config change report is running, but it isn't comparing for my NYC firewall past 24hr changes. other changes appear to be put into the html report that I have being written to a directory. Now I don't know if I can trust the product. If is skipping nyc firewall today, what about next week?…

I managed to make it work, "kinda of". Disappointing is how I can best describe the results and reporting. Lucky I have Orion and will just pull the info from it. It does a much better job than Cirrus does. Shame, I would think that getting an cisco inventory would be a simple process and even a "canned report". Orion has…

That fixed it! Thanks.

Confused, the website sayis V10 Switchport mapper (GUI): "Export network discovery findings to Excel , PDF, CSV and HTML" Is that not the case? All versions before 10 could do this in the gui, has that changed with V10 and the "studio" and I now have to use a cmdline utility with 10 different variables to get it to excel…

Thanks, but nope, no help. That is for MOVING your existing 9.5.x to NPM 10, not a fresh install of NPM 10 and SQL 2008. Zero database and Zero collector, both will be brand new, nothing existing..

Thanks for the info! possible to add interface alias column, so I can get on the output what interface might be named in the cisco switch? Those NodeID= and Status=2 are part of the report that give me the node and the stats of the interface being "down", so they are necessary. Noticed I can't "sort" (ascending/descending)…

Thanks for asking, but I dumped your netflow services for Scrutinizer. It gives me more detail and I can run it on another lower powered server. Since I don't need to keep NF data more than 24 hrs, it isn't an issue to me that the freeware version dumps the data after 24hrs. I am still running old reliable Orion 8.5.1.…

Vista? what is that? There are actually people who run the WindowsME of 2006? ;) WinXP all the way. Skipping VistaME and going to Windows7 when it is released. Thanks for the article, till I read it, would have called you crazy saying RDP and vista have issues. Again, blame microsoft for release a product that wasn't read…

nope. not the issue. About 800meg being used by all 53 services on the box. Avail physical "ram" is about 3gigs, with pagefile ram is about 6gigs Netperfmon about 215megs, w3wp.exe (iis) about 110megs, netflow around 45-50megs, etc

No, I haven't. Tech support has suggested that i "repair OPM" and all the drama that goes along with that process. What do I want to "reconfig" Website or Services, or both? I would think "services" but I am no expert.

It has been working without my doing any of what you indicated. The config-archive box text says" Downloaded device configurations are always saved in the router management database. A copy of each configuration can be saved in a seperate text file. So, if I am doing nightly config downloads, then one would think that…

Wish I could, I am getting "Connection reset messages" from solarwinds websites.

nope, never finishes the process. I had to "kill" the install process so I could get NPM up and monitoring my network. Now I can't access NPM because the Netflow configwizard want me to proceed forward. 

I have the EXACT same problem with OPM 8.51. Since the upgrade on my OPM server, I can't connect to my polling agents since upgrade. Ticket # Case #89228 has been opened.

De-installed Solarwinds Netflow and am using the free "scrutinizer" product till SW gets their sutff together. Google "scrutinizer netflow". Scrutinizer product is great. I don't need to keep netflow data more than 24hrs, so the limitations of the freeware product don't affect me.

have no idea how to write a ping script or any script for that matter. I only see a Telent Timeout setting, not one for SSh and I adjusted that one from 30 seconds to 1min. Didn't know about that setting. My "fix" was to run an OS version report 5 mins before my backup. seems to have solved my problems.

I see it here on other devices (6509, Pix,etc) configs as well.

2 hours and still not finished. No more configs have been exported for 2 hours. Wow I am so glad I bought this program over Kiwi CatTools. :(