cvachovecj

Richard, I think it would be best to open a support case. Include the link to this post. Jiri

FYI: I've moved this thread to the SAM space. Regards, Jiri

Basically what we need are the lines in question (plus a few before and after) including the exact endlines or any (maybe non-printable) characters on the line. So it would be best to cut these lines from the config using a binary editor and check e.g. in hex mode whether what you send to us is exactly what the device…

It looks like the the correct RESET command should be: <Command Name="RESET" Value="config global ${CRLF}config system console ${CRLF}set output standard ${CRLF}end"/> Verified by a customer on FortiOS v5.2.3. Jiri

Hi Kelly, thank you for your answer. We discussed this issue with colleagues and we would like to help you but we still do not fully understand what exactly you would like to do. Could you please explain in detail what you mean by "applying any number of baseline configurations system wide" and "tying each individual…

Brian, Please contact our customer support again and ask them for assistance with the eval installation. Engineering will probably have to perform some special steps to remove the traces of previous installations attempts. Should you have problems with the support case, feel free to send me the ticket # and I'll take care…

cnorborg‌, your assumption is correct; "config block end" must be on a different line in the current implementation. At least we have a candidate for an interesting extension of the compliance engine. Jiri

Actually we hired quite a few customers and typically, they were very active on thwack.

Hi Darren Rigby, The template you are referring to was unfortunately stored on thwack as a ZIP file: Change Login Banner - Cisco IOS(The link may be inaccessible to you.) I have uploaded it unzipped and verified it can be imported into NCM: Change Login Banner - Cisco IOS I'll make sure the same issue doesn't happen to…

Now that you are on NCM 7.3.x, you don't have to care about the "Jobs" folder -- job-related information is stored in the DB. Regarding "Scripts" -- if you have any custom scripts there, you can also store them in the DB -- in the Web UI, go to Configs -> Configuration Management -> Script Management. The rest, i.e.…

In a similar cause, we found out that the credentials/account used in SRM didn't have all the required privileges on the Isilon. You need read-only access to the following: ISI_PRIV_LOGIN_PAPI ISI_PRIV_AUTH ISI_PRIV_NETWORK ISI_PRIV_NFS ISI_PRIV_SMARTPOOLS ISI_PRIV_SMB ISI_PRIV_STATISTICS Jiri

Always glad to help although this time the credit would go to the engineering team that I asked for advice . Jiri

If you are unhappy about the answer, just insist on keeping the ticket open. Jiri

As discussed here: . HF1 for UDT 2.0 should fix it. Jiri

Hi, Feel free to open a support case. Consider upgrading to 7.2.2 first as it should also resolve the other issue you are referring to. Regards, Jiri

Recorded here: . Regards, Jiri

We hear you. It's definitely an important request and I believe it's just a matter of time before we have capacity to implement it.

Craig Norborg, Believe me, we are not blindly following the number of votes. The Policy feature is a very good example. Although none of the individual feature requests related to compliance reports is currently in TOP 5, there are a lot of them with decent number of votes. What is the message here for the product manager?…

Ok, you have to "protect" the ${CRLF} macro using a small trick. See A Few Tips and Tricks When Creating NCM Config Change Templates, section "How to add variables to CLI statements". Jiri

Hi, The remediation scripts support the same variables as the Excute Script functionality. Regards, Jiri

Please contact Jeff Stewart -- hopefully, a live troubleshooting session could help. Jiri

Hi alexrich, Cisco found out that your Smart Net access level is insufficient. (Unfortunately, I don't know how to increase it.) Jiri

That's good news!

Hi, More about syntax for comparison criteria regexes can be found here: Everything You Ever Wanted to Know About Regular Expressions in NCM But Were Afraid to Ask Regards, Jiri

Hi, as I stated in my previous post -- this kind of report is currently not supported and an enhancement request has been created. Regards, Jiri

I would rather say SDK is here so that you can build such workflow. However I agree that we have to extend it in order to support such scenarios better.

Hi, Here are the answers: 1) Is there a fully functional API for IPAM? (Fully functional meaning values can be set as well as retrieved.) No. You can only retrieve values from IPAM but not set/write them. 2) If not, is there a plan to add this functionality? This is an existing feature request, but it's not something we…

Hi, We are tracking this issue now. (Internal case #269466.) As a workaround, you can try to export the report from the Win32 application. Regards, Jiri

It's possible! You must rdesktop to your NCM server, run the SFTP/SCP server (Start -> ...), and go to File - > Configure. Regards, Jiri

Great to hear that! Regarding AD -- there's nothing on Syslog side to configure. It should authenticate against AD automatically if you provide username in the usual format DOMAIN\login If you have troubles using the AD authentication, please let us know. Jiri