cnbest01

Thanks for the answer. Do you have an ETA on the fix?

Can anyone else help me with this or should i put a call into support. Thanks

The Version is 4.0.0 build 164009.

I understand that but in this case there should have been a reset after each trigger. By that I mean when I look at the graph at a 5 min interval I can see the response exceed 200 the drop below 100 three times in a 20 min period but I only received 1 alert. The trigger is set for average response time but I can not seem…

I believe that if the SNMP setting were not correct he would not get the NIC info. Did you try restarting the SNMP service on the XP workstation?

Yes, I have SNMP access and currently can monitor the interfaces, drive space ...It just will not appear as a VMWare server. I also have SNMP access to the VMs. Thanks

I am doing a similar thing. To my knoledge you really have 2 options, first is to do a site to site VPN, the second is to have enough external IP addresses at the client site (one for each monitored device) and apply NAT. Keep in mind that only SNMP v3 has security and that any none tunnelled traffic will not be encrypted…

I am, Using 9.5. Not sure why though

I do this all the time. What you need to do is assign a single NATed IP address on the firewall/edge device for the device being monitored. You can not us an IP pool unless you do a PAT and only want to monitor a single device. Once the NAT is setup just add the device using the NAT IP address. Make sure that you allow…

I found it, Thanks!

What type of presentation are you trying to do? What products do you want to cover?

I had just asked this question as well. It seems that NPM does not currently support ESX 4.x. It is in the works BUT there is no timeframe as to when it will.

I see that my pics did not make it in the post sorry for that. Basically there were three events in the 5 min graph that exceeded 200 each had a subsequent poll of less than 100. But I only received 1 Alert. This happened over a 30 min period of time.

This is the steps out of teh admin guide. I have done this in the past and it works well.... To allow account-limited users access to reports: 1. Open the Orion Reports folder. Note: All reports created or predefined in Orion Report Writer are, by default, stored, in C:\Program Files\Solarwinds\Orion\Reports . 2. Create a…