clint1

We are considering a firewall solution at this point. We would put the db/web/poller server on our Air Gapped network and additional poller on the outside office network. We are thinking of adding a NIC to the outside poller that would connect to the outside interface of the firewall and on the db server add an additional…

bogdon, The integration was really simple. However I did have some issues getting Orion to work with the pagegate "getasci" module. It seemed that Orion could not find the pagegate command to send pages to the modem. Unfortunately Solar Winds support pulled the same old BS that they don't support the product so I never got…

I have not seen any issues in our charts or data being written to the db since I implemneted the COM+ change. That was on the 9th so a little under 5 days ago. I don't think we are out of the woods yet since other times it took a week plus for the poller to stop writting data to the db.

I did the changes via the slide bar in the syslog view. Then ran the compact and it completed about an hour ago. I saw the table was at 8.3 when the compact was done. Now it has been about an hour since I last looked at the table size and I see it is at 8.0Gb. So it has decreased by .3Gb since the last time I looked. Is…

I used pagegate and it was a snap. There was nothing complicated about the install other than knowing how to create the carrier. I also like how I can setup several groups with different people for paging on different types of infrastructure. By the way I didn't find any docs on how to integrate the products so I e-mail…

I also am seeing this type of behavior. Any ansers on this? My table is now 8.3 gigs.....!!!!!!!!! That is sick!!!

Did changing the COM+ applications properties correct the issue? I beleive I have the same issue but he poller and db are on the same server so I am sure there are no firewall realted issues.

Thank you. I have played with the alert suppressions of a "node going down" and think I have this manual process down although the product seems kind of brain dead in this area. There must be a better method to setup suppressions. You must agree that creating a new alert for each network device (Switch, Router) then adding…

I just set up pagegate in about 15 minutes. It was very simple and I used the getasci interface. I didn't need to do anything in Orion other than setup the alert to page after setting up Pagegate. Plus pagegate runs as a service where Notepager pro is an application that has to be running to work correctly. I will say that…

Thanks! I also run Orion NPM in our environment. Is there something that also needs to be changed in Orion as well to see the 10G correctly?

I am on Ver. 9.2.

#1. We have all so many applications that could send trap messages with stirngs of informaiton. One that everyone could use that is active in our environment is that one of our APC devices shows a High voltuage input status but the trap that is sent via email or page only shows the source and the MIB that was triggered.…

Thanks for your reply bbusbey. Once discoverd, you will still need to pick the resource/element to monitor. This means I will still have to interact/mouse click for each and every node...? That will equate to a thousand + clicks or more depending on how many resouces I have to monitor. Maybe 10 thousand + clicks if I want…

I would think you could do this throught the report writer. You can also see the SQL query in the preview pain of report writer.