Comments
-
This worked liked a champ. Thanks again for your help. Dwane
-
That is what I figured but I want to check it out. I will look at it tomorrow and let you know how it goes. Thank you so much for the help. Dwane
-
This is alot different than what i see in our GUI environment. How do I get to this page? It appears alot easier. Dwane
-
Jiri I am not sure what command to type in. At the time of our issue, we had support working on it and could not get that Pause to work. Remember in the old DOS batch days, you would put a pause or wait x amount of seconds. There is nothing like that in this process. I cannot remember whether it was the Juniper switch that…
-
Steve, I am pretty new at this configuration of Solarwinds Orion. Can you tell me how I add a new profile in global defaults? thank you all for your assistance. Learning a lot each time. Dwane
-
Superfly99 So I went to NCM, CONFIGS, Search NCM Am I missing something on this? Can you please explain in more detail?
-
@@Thank you, Will and Chris. I will test this. Learning new things everyday on Solarwinds. I appreciate all your time and assistance. Have a great day.
-
Hi Steve. Depending on what version of Orion you have, you may not be able to do this. As I recall, and we even had tech support from Orion working with us but there was no way of issuing a stop after each command. So two commands would run together. I guess you could not program in a <CR><CR><LF>. We ended up just…
-
Jiri, My apologies for not answering sooner. This issue was corrected. It was the way I entered the initial command. set system root-authenticaion plain-text-password. I had that entered in incorrectly. The correct script should be: edit set system root-authentication plain-text-password password password delete snmp…
-
Steven and Superfly, Do you have to have a TFTP setting configured on Solarwinds to complete this process? I am guessing there is not a combo SSH/Telnet profile option? Thank you. Dwane
-
Jason, How does on create this Universal Device Poller and where do I create the report? I am getting more and more acclimated to Solar Winds but I am not that proficient. Thank you, Dwane 210-450-0158 (work)
-
I at least made some progress. Thank you. I am guessing it is the "configs from selected nodes" or search all configs that present the problem? I did a search for configs over the past week and it produced an answer. Thanks for the assistance. Got any ideas of how to search the configuration database for particular…
-
Thank you, Mark. That worked. Thank you, Dwane Atkins 210-450-0158
-
Where would I find this option? I can find the interfaces in a few places. Thank you, Dwane Atkins 210-450-0158
-
I believe I have found the answer to where the information is located so I guess all I really need to find out is can I just switch the database or will I need to tweak Orion to accept the new DB? Thank you
-
Steven and Superfly, I was able to go to each node and change the default settings to SSH. Since we are using an older version I do not have the option in NCM to add another protocol setting. It has been done and as we move each device to SSH we can change it and then make it our standard. Great job and thank you so much…