SW4141

Thanks for the help!!! Support forward the information needed to get this working again. The following is what was required: 1. Use a full path for the TFTP Server's root directory. (UNC not mapped drive letter) 2. Change the "SolarWinds TFTP Server" service to run under an account that has access to that root directory.…

Case #16421 Maybe you can get some info.

Have you tried using SNMP to pool the device? Walk the MIB for the device to find the OID then poll that OID. You could then use the Alerting within Orion.

Shiny Overlay and Dark/Shiny Thanks

I am also having the same problems New install and an existing install of Orion with Netflow.

Once you have completed the docs I would also like access to the information. Thanks in advance for your work!! Steve

Just to let you know I also am having trouble custom polling. Same sort of thing test polling works, standard polling works, custom polling does not work. I sem to have the problem this devices that are connected over a WAN. But these devices work with normal polling (interface, cpu, etc), also these devices work fine with…

I also had this type of problem but I changed the type to TEXT and things are working fine. So the "Second Screen" has the following MIB Value Type: Raw Value Type: Text With "Keep Real-time and Historical Stats" is Checked. Thisis working for APC Batt temp, Load, Output volt, Output Current Hope this is of help

1) Run as a service 2) Command Line settings / switches 3) Greater integration with Orion 4) Orion "hooks" on the tools to run as with web interface

The following is the responce that I was given by support when asking about the script no longer working.I have submitted a request to our development team to restore the variable directory functionality of our TFTP server in a future release. The original .vbs script provided by SolarWinds is no longer supported and has…

we are having a similar problem where we can verify that the netflow info is being sent to orion, but the routers and netflow information is not being displayed

Another Vote Meru. I have been reading through the Posts for this and it has been almost a year for this request. What about a REAL update on this?

I would also to request support for Meru

Have you looked at Scrutinizer by Plixer? http://www.plixer.com/

Yes. the port is correct and the routers werify good flow data export with the show ip flow export command: sho ip flow export Flow export v5 is enabled for main cache Exporting flows to 172.25.99.221 (2055) 172.25.99.222 (2055) Exporting using source interface FastEthernet1/0 Version 5 flow records 383233807 flows…

I am sorry if my tone has offended anyone, i really do need the help of the group. my problem is really that this is not my first time at the prom. i have netflow WORKING in my environment. other product demo's work and show expected results. additionally all the demo/eval boxes are on the same net. listening to the same…

To help trouble shoot this problem we have set up the routers to send information to two analyzers, one being Orion Netflow and the other being ManageEngine Netflow Analyzer 5. Both of the analyzers are on the same subnet and same infrastructure. Data and information is being displayed with the ManageEngine product but not…

First – “Thank you” to everyone for your responses. Now from what I am “getting” from these comments is, “Orion Netflow Analyzer only shows the active flows for the past X minutes”. I think that would be GREAT if it would do that. A little bit about our layout, we 16 remote offices in a hub and spoke layout, with HQ as our…