PavelSuchy

You are welcome, Dan. Thanks for posting on thwack. Pavel

I agree with JiriPsota. There is visible that 18 interfaces were discovered (SnmpInterfaces [Count: 18]) and all of them were successfully imported (InterfacesSnmpInventoryStep - Success (000.25s): []). It would be hard to determine where is the problem, so the easiest way to solve it is creating support ticket. Cheers,…

If you dont want to have all the interfaces in one resource (chart) then you can use Custom Object Resource. Just place as much COR on the summary as needed and then configure one by one.

Glen, when you adding the UCS what port do you use and what polling type do you select? Pavel

If you are talking about main poller and not additional web or additional poller installation, where it has no sense to be, then I would suggest you to create a support ticket because missing Report writer is not expected behavior. Cheers, Pavel

Hi jspanitz, I would suggest you to collect snmp walks from the device and create a feature request under this thwack forum: It is the best way how to get anything implemented in the NPM. Thanks, Pavel

Hi qbarry, you can enable F5 polling in list resource on the node or add the node via discovery where it should be enabled by default. There is no F5 device view but there is couple of new resources on node details which are shown on F5 devices only. We show list of Virtual Servers, Pools and Nodes on F5 devices. Cheers,…

Hi Lauren, this statement means that the device does not respond to this OID. I would do a snmp walk on your device and then look for this OID. You will see if it is supported by your device or not. Cheers, Pavel

Hey Whit, even when you are logged as admin you might have View Customization rights unchecked. There is also possibility that the view has view limitation set but you wont be able to find out without Customize page function enabled. Adding screenshot is pretty easy with the Insert Image button here: Cheers, Pavel

jrebelo, please set up the extended loging on one of the workstations as follows and reproduce the issue. Send me the log on email or attach it here. To enable the extended windows update loggin you must add following registry keys: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Trace Value…

Hi reubenjack, is there any other significant attribute for those interfaces than MP in the name, like interface type? Actually there is not too many options how to filter interfaces, except interface type, but you can use text filtering in the search box. So I would use the search to select interfaces which should be…

Hi Michael, yes, this conditions will work fine, because you can use Node properties for interface type. You should also be able to create your alert through two interfaces using advanced sql conditions, but I will need to clarify if you are interested in shutdown to up status change only (we can not cover this) or every…

Hi Wilson, what resource are you trying to show the data? Is it chart or table? Cheers, Pavel

Hi sja, I was not able to reproduce your issue on my environment. We do not change polling interval during upgrade so it seems strange to me. Did you notice this change imediatelly after upgrade or after some time? If the change was done after upgrade to 10.6 then there must be audit event message under Message Center.…

I am not exactly sure what you mean by "mgmt and production interface". Anyway if yours blades are not clickable on the UCS overview and you know the IP you can still add it via add note wizard and it will be recognized and linked as blade. Cheers, Pavel

Hi Rickg, I am not sure if rolling back to 10.4.1 fixes your problem. Could you check what data are polled from the device? These peaks in utilization are offen caused by the device itself. If you find any super high values polled from the device, we can try another steps how to identify what's going on on the device.…

Hi Diego, yes, it is possible and we already have this kind of alert predefined in the NPM. Go to SolarWinds Orion/ Alerting, Reporting, and Mapping path in Start menu and launch Advanced Alert Manager. Click on Configure Alerts button. You should see list of predefined alerts there. Check and highlight Alert me when a…

So I investigated the issue with the ${InterfaceName} variable and the problem is probably in the test alert. If you select node only in the Test Fire Alert then you receive NodeName instead of InterfaceName but if you select Node and Interface, you will receive correct InterfaceName. Let me know if this helped. Thanks,…

Hi Debbi, you can set retention interval for Wireless and Hardware health in the Settings\Polling Settings page under Detailed/Hourly/Daily statistics rettention (hardware health - APM_hardwareitem_details) and Detailed/Hourly/Daily wireless statistics retention (Wireless - NPM_NV_WL_...) settings. If your settings is not…

Thanks for the feedback, pskfun. It's good to hear that the update process went well.

Hi sduff, SLXer, unfortunately this is not possible in current NPM. You only can create a report over the historical data for the poller and filter the results. Anyway we plan to include graphs into reports in our future release so your needs should be satisfied. Thanks for posting on thwack, Pavel

Hi Darrell, go to the TimeFrame tab and select Yesterday from Time Frame dropdown. If you also want to filter the results for one node/printer then go to the Filter Results tab add new condition and select NodeName (NodeID) according your requirements. Thanks, Pavel

Hi Dufer, what version of FireFox do you use? This should work on all supported versions nad types of browsers. If it doesn't then we need to investigate. Thanks, Pavel

Hi Kiran, What verification do you mean? What exactly do you want to compare? Cheers, Pavel

Hi Dave, at first I would try to change "Default zoom range" and "Sample interval" on the resource. If it does not bring the data into the chart then you should check if there are data in your database for those nodes. Cheers, Pavel

Hi mortenklow, I would suggest you to open a support ticket, because this seems like a bug. We fixed similar issue in hot fix 4 so you could try it and see if it help. Cheers, Pavel

Hi kindbro, UnDP does not read values as Celsius or Fahrenheit directly. It just reads value from provided OID and you can convert this value then. In fact, you will read some value as integer type and then you can decide what to do, if convert from Celsius to Fahrenheit or Bytes to MegaBytes or vice versa. If you are…

Hi Rotto, crzyr3d, I tried to reproduce your problem on my NPM 10.4 but I was not successful. I am able to poll negative values and convert them properly using CtoF funciton. Can you check, that your device provides correct information when negative value hits? Can you try to test the oid in UnDP to see if you receive…

Hi T0dd, to be able see details about switch you need to add the node to NPM as well. Just click on the name and you should be asked to monitor the switch in NPM. If there are any other missing information like chassis & blades then it will need more investigation. Adding UCS via ICMP should be enough because UCS details…

Hi Masonstryker, UnDP works with SNMP nodes only so check if the rest of managed nodes are add via SNMP and not WMI or ICMP. Cheers, Pavel