Nhicks

Would like to see RuggedCOM Routers and Switches populate with detailed info, vs. "unknown." Any further information needed, I can provide it. Not sure what the OID is or where to find it.

Well looks like I got it this time... After renaming some groups and trying different names, i finally got it to work. At least on V2c. One of those things, I dont know what I changed, but something worked. At least now I can use this as a baseline to get the others to work on the network. Thanks again for the assistance…

Yeah its not the same without him... long wait until August! They will do V2c... I tried the same general concept.. I even tried basic V1, no luck. I just put an Adtran 3205 router on this box with a 5 port hub/switch... configured it as V2c, it works great. all 3 devices ping each other great. But when I try to build the…

it is set to SNMP, so i thought shutting out ICMP would be safe. I guess some subnets that works, others it doesnt. In teh end im having the fw group remove the ICMP blocking, should fix the issues. Thanks!

Andy - I thank you for your assistance. I deleted the R/W part, and kept Read Only, checked the 64 bit counters, and verified the rts1 doesnt have a space. No luck. For grins, I set authentication to None, still no luck. In the RuggedCOM - the only options are None/HMACMD5 and None/CBC-DES For a "simple" protocol, its…

Does anyone have any ideas on this??

mharvey, can you ping me offline? neilhicks@alliantenergy.com

Once again thank you SO much! It works flawlessly. I am learning more and more about SQL than I ever wanted to, but its good stuff! Neil M Hicks Telecom Technician 608-289-1183

Due to the wonderful world of IT Security, our ICMP and Tracert is blocked at the firewalls. However, I did verify with our fw group that traffic is going in and out both ways. Neil M Hicks | mobile:608-289-1183 | email: neilhicks@alliantenergy.com

Thanks Andy. Can you further explain the trap setup? I want to avoid getting an email for every bounce thru the day (could be hundreds or thousands on a bad circuit.)

Thanks Andy. I tried to change the configs to V3, and that did not seem to change anything. New PDF attached... can you find anything wrong?

That did it… I appreciate it, VERY much! I'm not an IT guy, more field work, but glad to have your assistance! If I knew about your company we might have had you guys set it up initially instead! Neil M Hicks Telecom Technician 608-289-1183

A reboot of the machine/SW fixed it – I just hope that isn’t going to be an ongoing fix. Neil M Hicks Telecom Technician 608-289-1183

I want to thank you lag, for all your help. I've got to the point of the map showing, with weather loops – and an icon for the state. When I click the state, it brings up the dialog box, I click WI(state) and it hangs on a white page. The more I play with it, it looks different than what I was expecting.. wish I knew…

Ugh. So it turns out, I have a Orion\SolarWinds directory, as well as a Orion\SolarWindsNPM directory. I don’t know why I didn’t catch that earlier – but copied my hack files into the NPM directory and now im getting somewhere. So using the default HTML shown in the instructions, with MyHack.aspx – I can see the google…

I'm in database manager, where would I run this query? Also I have, SQL Servers >MSN1SOLARWINDS\SQL\EXPRESS >>NetPerfMon So would the following connection line be correct? (“server=(local)\SQLEXPRESS; initial catalog=NetPerfMon;uid=xxx;pwd=xxx”) Neil M Hicks

I did delete the canned lat/long and added two new field and moved my coords over to them – still blank page. I have some nodes that have no coords, is that a problem? Do you have more information on your last part – running queries against the database using database manager? Thanks Neil M Hicks Telecom Technician

I noticed I didnt have the Country property on. I added it it to customer property builder and populated all with USA. I changed my custom HTML to <iframe src="/Orion/GoogleHack/MyCityStateMapHack.aspx" width="10%" frameborder=0 height=600 scrolling=no align=center></iframe> No longer getting the error above, but now just…

Would anyone have any ideas on the above problem?

I've gotten to the point of adding the custom HTML, but receive the following error: "Error:Object reference not set to an instance of an object." Any ideas?

Thanks! Of course the username & PW were changed. Would the Data Source = (local)\SQLEXPRESS be used for the “server=SQLSERVER\INSTANCE variable? Neil M Hicks Telecom Technician 608-289-1183

What is the default username/pw for sql? Where would I login into sql to test what I think they should be\create a new account like SWMPAS?

Can anyone help an SQL newbie with this part: oConn = New System.Data.SQLClient.SQLConnection ("server=SQLSERVER\INSTANCE; initial catalog=YOURDATABASE;uid=DATABASEUSER;pwd=DATABASEUSERPASSWORD") How do I find the serverinstance / yourdatabase - also the default username and password? When we setup NPM, it was very basic…

Does anyone have any ideas on this?

I have a new problem now. The string mharvery gave works fine. The filter is working, however, the Tree list isnt showing my DOWN nodes, unless they have something in the comments field. I have one node with a circuit id in the comment section, its showing "Down" as it should. I have another node with a blank comment…

Additionally, When I do "show snmp" I am seeing SNMP packets increasing both ways - in and out : MSN_GDC_3South-A#show snmp Chassis: FOC1844S5G2 1890486 SNMP packets input 0 Bad SNMP version errors 0 Unknown community name 0 Illegal operation for community name supplied 0 Encoding errors 2184778 Number of requested…

Having the same problem here... anyone with ideas?