MFA — THWACK

I have the exact same problem. See attached picture. I am using NPM 10.3.1. Regards Michael F. Andersen

in NPM 10.1 UCS Monitoring - Adding Blades, SNMP Possible? Comment by MFA August 2012

Look at the first post.

in (Solved) Discovering a Cisco 877-M router in Orion. Comment by MFA May 2009

From IOS 12.2(25)SED1 to 12.2(52)SE (newest version). Beware i have only done my test in my LAP and testet the Solarwinds functions. I have not done a properly test of the IOS.

in [Solved] Monitoring Multiple units in a Cisco 3750 stack of switches? Comment by MFA November 2009

1.3.6.1.4.9.1.824 - Cisco ACE 4710 Application Control Engine Shows up as "Cisco" and not "Cisco ACE 4710"

in Tell us your "Unknown" devices! Comment by MFA November 2009

Yes.

in (Workaround) Unable to start network discovery after installing SP2 on NPM 9.5. Comment by MFA July 2009

Thanks for the update. I am planning to upgrade in a couple of weeks, so the infomation i very useful.

in Upgrading from NPM Ver 10 to 10.1.1 Comment by MFA January 2011

Thanks rgward!

in Machine Type for Cisco 3750s Comment by MFA September 2010

Solved! An IOS upgrade made stack-port monitoring possible. Thanks!

in [Solved] Monitoring Multiple units in a Cisco 3750 stack of switches? Comment by MFA November 2009

Yes you will have 2 x NPM servers, but the Web server part is only active on 1 server. They will both send data to the Database server.

in Installing 2nd polling engine? Comment by MFA November 2009

Thanks a lot. I'll try that.

in How do i promote my Orion Eval to a real licensed server, Comment by MFA December 2008

Me too.

in Availability for Load Balancers Comment by MFA July 2011

Yes, i would like that too.

in Enable 64-bit counters support by default Comment by MFA September 2010

Wauw, great post! Works right out of the box.

in UnDP - Cisco HSRP status Comment by MFA March 2009

Thanks for the replys. How do you monitor the stackports? If i make a "list resources" on my stacks it looks like the attached picture. I can't see the stackports.

in [Solved] Monitoring Multiple units in a Cisco 3750 stack of switches? Comment by MFA November 2009

Solved. Problems with database, which NPM 9.5.1 did not discover. Size of database 70+ gigs. NPM V.10 could not work with the database in this condition, and therefore the polling engines went down. I stopped all SolarWinds services on both polling engines, and did a database maintenance job which went on for 48 hours!…

in [Solved] Polling engines goes down after upgrading NPM to V10 Incl. SP1. Comment by MFA August 2010

Thanks Jeff. Looks likes its a bug, so i will wait for a fix in a future release.

in Display interface as unplugged rather than down (even if its administratively shutdown)? Comment by MFA December 2009

It works thanks! I also found this thread on the subject. I don't understand what's the problem, but anyway it works now.

in [Solved] Report problem (works in report writer but not in browser). Comment by MFA October 2010

Here is the reply fra Solarwinds support. The workaround works! -------------------------------------------------------------------------------------- The issue you are experiencing appears related to a bug with the web-based network discovery which has already been reported to the development team. As a test, can you…

in (Workaround) Unable to start network discovery after installing SP2 on NPM 9.5. Comment by MFA July 2009

Think I spoke too soon on this one lol. We're now experiencing an issue were the database is not longer keeping historical statistics for Response time and packet loss. The gauges for resp and pack loss are working but no historical data is being written to the DB. Node status is unaffected by this and is operating as…

in Upgrading from NPM Ver 10 to 10.1.1 Comment by MFA January 2011

Hi rgward! Would you like to share your poller with me? I have a lot of Cisco Catalyst 3750 stacks.

in Machine Type for Cisco 3750s Comment by MFA September 2010

The polling servers get marked as down when the database archive job starts at 2:15. If i run database maintance is the same. Stops here... Maybe something is worng with the database, but it worked perfect on NPM 9.5.1...

in [Solved] Polling engines goes down after upgrading NPM to V10 Incl. SP1. Comment by MFA August 2010

Hi Caroline. What will happen with my current installation? Will i lose all my devices etc.? It's only for a temporary period of time i need to keep my installation alive. I will make a new installation some time in the new year.

in How do i promote my Orion Eval to a real licensed server, Comment by MFA December 2008

Look here

in 3750 Stack Monitoring Comment by MFA February 2010

I've submitted a ticket on this. No matter how i start a discovery the result is the same. From the web or via the primary polling engine or the secondary polling engine, it just hangs instandly.

in (Workaround) Unable to start network discovery after installing SP2 on NPM 9.5. Comment by MFA July 2009

Cisco ASR routers show up as a generic Cisco As they have 2 processor you need to have CISCO-RTTMON-MIB Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 http://www.cisco.com/en/US/docs/routers/asr1000/mib/guide/asr1mib3.html Can we get the MIBS updated and i the case of the ASR we need to see ESP,…

in Tell us your "Unknown" devices! Comment by MFA April 2010

Thanks. Made a reply in the other thread.

in (Solved) Discovering a Cisco 877-M router in Orion. Comment by MFA February 2009

We monitor each physical interface as well as the Port-channel Me too.

in What is the most efficient way to monitor etherchannels on NPM ? Comment by MFA January 2011

Thanks Sean. Works with 7-ZIP. To bad Windows own winzip can't handle the zip files.

in [Solved] Solarwinds Diagnostics tool broken in 10.1.2 ? Comment by MFA March 2011

Thanks a lot Yann. You're the mann!

in How do i disable the Engineer toolset buttons in Orion? Comment by MFA July 2009

bpmullen> Did you find any solution to this?

in Orion and Cisco ADSL Speeds Comment by MFA May 2009

MFA ✭✭✭

Comments