JaroslawLadyga ✭✭✭✭✭

My suggestion is to recover backup of old server to any new location and then setup NCM archive to recovered destination.

You can get actual transmit and receive bps info using relevant OIDs and calculate utilization. Most interfaces bring utilization data directly from device via SNMP and OIDs.

Case #249491 - "Network Sonar Discovery gives an error" has been created

If you have the same type of router or only few types then you may perform massive population, not one by one

Thanks - it is really Status Summary widget now.

Here it is: Case # 00622855 - few elements of classic vew do not show charts and data. I can agree that classic style chart do not work on 2020.2.1 platform but would be better to remove them from the list, I think.

I'd suggest to restart all Orion services on Orion server (Programs > Solarwinds Orion > Orion Service Manager). If will not help then run Configuration Wizard for all items (database, website. services). If problem still exist then you have 2 options: 1. repair NPM installation from Control Panel > Uninstall Programs >…

Here is example of SWQL: SELECT n.InterfaceCaption,n.DetailsUrl,n.Status,n.StatusLED,n.OutPercentUtil,n.MaxOutBpsToday FROM Orion.NPM.Interfaces n Try to use Modern Dashboard with Table Widget to build the query you want (or test some queries in SWQL Studio.

Hi Cosmin, problem has been addressed to SW support and is under evaluation as Case # 112642. I will post a message as soon as I get solution or some more info.

Hi Brandon, I got this error at SysLog Summary when I went to router detailes and selected grouping by hostname. When changed grouping to "by IP Address" then I got information if there were any syslog messages for selected time frame. SysLog Messages related to the Selected Node gives the error without regularity. I can…

Thanks, that is exactly the idea I have

Thanks, but thread is not exactly about the issue. There was not installer copy issue, was copied without problems and SW modules have been installed but Configuration Wizard failed.

I got no request for selecting any modules - just automatic installation. Both servers are virtual and I have remote access to them by VPN.

all modules have been installed on Primary with Hot Fixes and then Orion Installer got copied to Secondary and run. It copied and installed all Orion modules but config wizard failed.

I did all step you mentioned.

I was going exactly according installation instryction. All SW files were copied and installed but config wizzard failed with mentioned error.

I've installed HA Secondary from Orion installer copied from Primary with option HA enabled. There are NPM 12.1 with HF 3 and NCM 7.6 with HF1 installed on Primary. Do you suggest to instal Orion Platform HF3 on Secondary?

Hi Brandon, That is exactly the point with Network Atlas Settings: there are too few settings to set up: Map Defaults allow to set while map status changes depending on percentage of UP objects ... ONLY! And more that is whole screen for that ... looks like a joke a little. Node Tree and Graphic styles are too poor as well…

Thanks Roger, I've checked that and it seems to be exactly what I need :-)

I would like to see "location" as well Status , IP address and type of switch. I can not find any place to select what I can see there. Is that default NPM setting or can I decide what is displayed when pointing switch on the map by mouse?

Hi, thanks, I'll try to use it however I'm not PowerShell expert Will let you know results even if failed. Jaroslaw

So the selection features are poorer than for nodes where I can use custom properties to select multiple nodes or interfaces. I suspected that logical relation between conditions is AND but would be better if it is OR

OK, got your point ... and I made limitation of "Group of groups" for user who was intended to has limited view. But why Admin got the error message. Admin should not has any limitations and any limitation was defined for Admin account.

OK, it works however I'm not sure if Windows 2003 would not install specific regianal settings back depending on admin's ID. Thanks a lot.

Use any PDF printer driver. There are some free ;-)

If to exclude nr of element per Polling Engine then I'd suggest to consider server and array possible issues. I have experienced performance problems with recent NPM, NCM, NTA, IPAM, UDT and Toolset versions iinstalled on Orion server, FSDB server and MSSQL server. Number of nodes were above 300 and interfaces below 2000…

Please give me some more details.

Thanks, it looks good to me. I will test it next week. It is enough for now to know that is possible

Try to associate link to one interface only. That is working for me.

Hi jrouviere, Thanks for answer so I understood there is something with my system. I previewed log you mentioned and I found some errors but not giving exact point. Active Diagnostics didn't give an aswer as well. As a result I've restarted all Orion services with Orion Service Manager and it solved the problem. Actually…