JaroslawLadyga ✭✭✭✭✭

I got the same problem with Workspace Studio yesterday. I've reinstalled Engineers Toolset few times and even installed NPM 10.2.2 earlier than was planned. Nothing helped! I got always error message: " SolarWinds Workspace Studio has stopped working. A problem caused the program to stop working correctly. Please close the…

I suspect that "auditing event has occurred for all events EXCEPT when users are logging in" never happens because nobody is editing then.

Please have a look at Re: Ingress vs. Egress traffic on Inside and Outside interfaces . Maybe it would help you.

I'd suggest to restart all Orion services on Orion server (Programs > Solarwinds Orion > Orion Service Manager). If will not help then run Configuration Wizard for all items (database, website. services). If problem still exist then you have 2 options: 1. repair NPM installation from Control Panel > Uninstall Programs >…

If you have active SolarWinds Maintenance for any product then you may go to Virtual Classes and participate in Virtual Classrooms | SolarWinds Customer Portal - Getting Started with Network Configuration Manager. You may see how to upgrade firmware and ask questions during class. If you have not active SolarWinds…

I'd suggest to go to the poller definition (in Orion Universal Device Poller application) and mark up it's assignment to website. There are few selections where the poller has to be used - gaugs, tables, charts etc.

Hi Lance, I'm afraid that it is not possible what you need. NTM is rather simple standalone application.

I think you should select data with adding condition like below: where xx is ID of your selected node.

I'd suggest to go Administration>Views>edit View and edit selected view and then save it as duplicated with another name. Next replace Summary View with new one and tune it up.

I've found 2 discussions regarding the issue: https://thwack.solarwinds.com/thread/68733 https://thwack.solarwinds.com/message/244670#244670 And I can prove that change of Preferred Cisco MIB from default to CISCO-ENVMON-MIB in Hardware Health Polling section of Node definition fixes the problem in NPM 12. Anyway it looks…

Double check definition of the view and tabs.

It still depends on nodes polling (nr of interfaces, nr of defined TCP and UDP ports etc.). So I'd estimate the traffic for 500 - 1000 MB per hour.

I'd suggest to restart Orion services and check again if NCM has issues. If yes - run Config Wizard. If will not help assign case to SolarWinds.

You may change alert trigger conditions for that node. But I'd suggest to use custom property with treshold for latency for each node - then you will not need to change alert trigger condition.

Hi, I'd try to test different versions of SNMP on Node Properties in NPM. If you have clickshare device supporting SNMP then at least SNMP v1/2 should work. When you pass testing connection then create necessary pollers with UnDP or Device Studio for particular OIDs (assume you know them).

If you run fresh installation you should have SA credentials to MS SQL instance to create SolarWinds database and SolarWinds user. You may use Windows authentication if Windows credantials has admin rights for server and SQL server (suggested service admin user then - not domain admin user which has to change password…

I'd suggest to assure that you migrated to Orion platform 2016 before installing anything (enough to upgrade SAM to newest version). Than install NPM on the same database, next install UDT. NTA needs to install FSDB database firstly on it's own server (suggested solution by SW). Then install NTA on Orion server (the same…

I never monitor all interfaces on switches. Please consider to define (really) critical interfaces - those which have to be always UP. Other words if critical interface goes DOWN it means something wrong happened. Even if you have SLX license it is very little information that interface with workstation hooked goes down. I…

I'd suggest to restart all Orion services on Orion server (Programs > Solarwinds Orion > Orion Service Manager). If will not help then run Configuration Wizard for all items (database, website. services). Try to run SolarWinds Active Diagnostics and Permission Checker as well. If problem still exist then you have 2…

I'd suggest 3 areas of standardizing: 1. Alert naming standards (or convention) - pointing severity and corelated with RESET naming; 2. Alert subject standards - all basic information like what, when and where; 3. Alert details standards - body with all necessary details for relevant recipients - as an option link or…

Hi Mav, the list has great improvements but there is still lack of few features I'm waiting for. I must agree with jawells saying "you are keen on new features but not keen on improving existing features". Here are few examples: 1. Report Writer - I see that it has not been improved for years and it is practically the same…

Is turn off AppInsight for IIS on node not enough?

I agree with you that it is probably SNMP issue however I have no experience with those stacked HPE switches (if it is not SolarWinds bug). My suspect is that device template for the stacked switches used by Orion is not perfect (SETTINGS>All Settings>NODE & GROUP MANAGEMENT>Manage Device Templates). I'd suggest to see…

ALCATEL SR 7750 sysOID: 1.3.6.1.4.1.6527.1.3.4 ALCATEL SR 7750 sysOID: 1.3.6.1.4.1.6527.1.3.8 ALCATEL SAS-M 24F 2XFP ETR 7210 sysOID: 1.3.6.1.4.1.6527.6.2.1.2.2.3

QNAP NAS-MIB storage 1.3.6.1.4.1.24681 DELL-SHADOW-MIB 1.3.6.1.4.1.674.10893.2.102 Relevant MIB files attached in my post reg. QNAP and DELL MIBs request.

I would rather go with agent based polling.

I can add that you will need good webcam and stable link from tech point of view. The proctor will check your valid ID document (issued by Government) and how looks your desk and room. And more - proctor will look at you all the time and will check your computer at the beginning (it means no other applications, services…

I'd definitely suggest to use BizTalk Server 2010-2013 Availability Status template and edit it. If you miss something add relevant component. You may try to start monitoring services manually but BizTalk needs much more different components than services or processes. Even the template tuned by you would not probably…

I'm afraid that SolarWinds answer is correct. That is a way how built-in logic works. If you unmanaged your application then polling doesn't work so SAM cannot know if applications was UP or DOWN and it's status is UNKNOWN. I'd suggest 2 solutiions for your problem: 1. Use Unmute Alerts for the application, so you may see…

What is approx time of prod release?