GZhytar

ecklerwr1, not sure about thwack, but you can read this in Orion Administration Guide - Chapter 11 Creating Reports - Scheduling Reports. You are right, traffic builder creates graphs on a fly, but all needed information is encapsulated into URL, so it can be scheduled via Report Scheduler. When you pick up link in Report…

Bizarro, awesome, thanks for that info! As for traffic stats, is that the same problem as in this post ?

AlbanyNY, let me clarify a little bit. Orion report scheduler allows you to print/send via email web pages (basically any url from a Orion Web console), generated by Orion Web console. As I understood, NetFlow resources in a Web console work fine for you, so you can schedule this Web pages to be automatically generated and…

Folks, I'm glad to report that we found the root cause of the issue and it should be permanently fixed in upcoming NPM Service Release (should be released later this year or early Q1 2012). Unfortunately there is no workaround for now that you can apply without code changes. thanks

Bizarro, glad that it works now! Please can you clarify where you changed MTU size (VM card/Routers?), so we can analyze this in our lab. thanks!

Hi AlbanyNY, let me mention that I understand your dissatisfaction with the current reports provided by Report Writer. This is something we are considering now for future release. You've mentioned that requesting Web-pages through Orion Scheduled reports doesn't work for you, despite it should work flawlessly. Please can…

Hi rrmmm, which product and which version you are trying to install? thanks

Hi q@z, do you have nested CBQoS policies applied to not working interface? I saw some problems with such a configuration. Please open Support ticket and attach CBQoS config of your router, that should speed up investigation of you issue. thanks

jswan, Please copy Netflow-OrionReportWriter.cfg to the Orion root folder: %ProgramFiles%\SolarWinds\Orion (and of course make copy of previous version of file if exists) thanks

Steve, as a short term workaround you can run this SQL query against your Orion DB (this will work unless you run List Resources on such node) : UPDATE Pollers SET PollerType = 'N.Memory.SNMP.CiscoGen3' WHERE PollerID IN ( SELECT p.PollerID FROM Nodes n LEFT JOIN Pollers p ON p.NetObject = 'N:' + CAST(n.NodeID as varchar)…

Bryan, thanks a lot for providing this info. We've created special thread to help other customers in determination of buggy devices. thanks

Hi there! I need community help here. To speed up investigation of Huawei support, can anyone provide packet capture (e.g. using WireShark utility - www.wireshark.org) containing NetStream traffic from some of Huawei devices with default configuration? 15-20 minutes should be enough, longer - better :) If someone can help…

Hi uscallesen, from the top of my head - upgrade to NPM 10.2 invokes upgrade of Syslogs table (optimizing indexes, changing structure). We did our best to make this transparent to end-users, but in case there are dozens of millions rows in Syslog table that could temporarily decrease DB performance right after upgrade. Can…

Hi borgan, please also take a look at this thread for more information: Difference between NetFlowSummary tables?

Donald, let me say that we hear you and understand your upset. To clarify current situation: we are working hard now trying to find out simple and affordable workaround/solution for the issue with special characters. I'll update the loop as soon as I have needed info. thanks

Geoo, this is known bug in NTA 3.1/3.5. If you have active maintenance, I would suggest you to participate in upcoming Release Candidate program. Please take a look at this post: ?PageIndex=2 thanks!

My 0.02$ regarding NetFlow Traffic Analyzer. I would recommended this thwack post for quick overview: 

Hi brobst007, I believe there shouldn't be any problems, it's in a supported devices list . Configuration guidelines can be found here: http://www.cisco.com/en/US/docs/ios/12_1/switch/configuration/guide/xcdnfc.html thanks

Folks, thanks for your feedback. For internal SW folks: feature requests for this feature tracked under case 54708

ncsisnet, I've seen this before for some devices which were exporting incorrect doubled information within NetFlow packets. Please can you open support ticket and collect 1-2 hour capture of NetFlow data, so we can investigate this more deeply.

ciscoman, I've just realized that this tool requires you to enter capitalized Y. I agree that that's quite weird, but please can you try it and it should do the magic. thanks

pvaldes, chart that you've provided actually displays Amount of Data transferred per time interval, this is not rate chart. We have interval = 1 minute there, so in your case it shows ~350Kb of data per 1 minute and it's equal to 30 min * 350 Kb / min = 10Mb of data which is reflected in table below chart. Please can you…

Rakem, your feedback is important for us. I've created internal case 80289 describing your feature request and sent it to Product Manager for review. thanks

ecklerwr1, there is a trailing space in the link, so that's why it opens incorrectly, we'll fix it. I really like you proposal about including tool into the bundle. Taking in care that most of problems start during Configuration Wizard run, that definitely has sense. P.S. Do I need to explain now, why I love our community…

Guys, we had session with our customer Eric, who had problems with exporting NetFlow with ASA 5510 v8.2.(1) - all configuration commands were issued, but ASA exported only template packets without data. Issue was resolved only after he issued this command: flow-export enableDespite it produced this output, after that ASA…

Hi Provident_NWS, I've seen such a situations before - it was caused by the fact that SNMP Interface indexes reported by router (and though stored in Orion database) are different from indexes, reported inside NetFlow flows. Please open support ticket at https://www.solarwinds.com/support/ticket/ . This information is…

Folks, in NPM 10.3.1 we introduced changes in topology polling that should reduce CPU spikes on devices (basically we have short delays between sending SNMP queries that should prevent device from being slammed). I'd recommend to upgrade to 10.3.1 here. Answering second question - there is no negative impact from setting…

All, as you've mentioned IP Address groups here, this post should be interesting for you. thanks

aqeel73, I hear you. After you repair NTA installation, you'll need to repair all components: Database, WebSite and Services using Configuration Wizard. thanks

Folks, this is possible to do via "Change Status of an Interface" Alert Action you can assign to Trap Rule in Trap Viewer GUI in NPM 10.1.2