FormerMember ✭✭✭

Simply create a rule and make it Regex, then add the following to each line, \r Paste in the entire block, it should look like: line 1\r line 2\r line 3\r You will need to escape any special characters through out the text as well. If you have any problems paste a screenshot of the text, and I will reply. ** edited, I must…

Hi there, you need to speak to the guy who administers/owns the email server in your organisation. it is likely that it is alowing relay to internal addressesbut not to external addresses. If it is MS exchange then you will have to update the SMTP connector to allow the ipaddress of your Orion server to relay to external…

The worst thing that solarwinds do is try to sell consultancy to my customers when i'm already providing them with that, its just embarassing.

Thanks Matt - easy solution - worked like a champ!

Hi below is a list I would like to see added 1.3.6.1.4.1.9.12.3.1.3.1000 Cisco WS-C4507R+E 1.3.6.1.4.1.9.12.3.1.3.1008 Cisco Nexus 5548 1.3.6.1.4.1.9.12.3.1.3.538 Cisco Systems, Inc. ME-C6524GT-8S Thanks James

When we talk about management/monitoring the plan for long term future makes this discussion point fairly irrelevant. As case in point for VMWARE..if your approach had been solely based on SNMP you would be out of luck today to manage/monitor an ESXi environment. This too is likely to be the case for where HYPER-V sits in…

 Yes, it's possible, but we don't have a built-in monitor for it. You can do it via a Windows script monitor.

This is old, you may have already figured it out. Under the trigger condition tab, you can choose group.

sysDescr.0 SecureComputing/SG300 Version 3.2.2 -- Mon, 30 Mar 2009 18:06:37 +1000 sysObjectID.0 1.3.6.1.2.1.1 Vendor - Secure Computing Model - SG300 Thanks,

Hi 1.3.6.1.4.1.9.1.1286 WS-C4507R+E Thanks James

Please enable session tracing, go into the poller and post the session trace or troubleshoot what is happening. Without that information no one can assist.

I would guess its simply to always have 2 points of data per 10 minutes. If it was 10 the polling scheduler *may* be a few seconds out, and then people may cry because their precious bandwidth stats aren't as accurate etc. *shrug* :)

Please add the new Cisco ACS 1121 Appliance to your objects. object id = 1.3.6.1.2.1.47.1.1.1.1.13.1

HI Please can you add the following OID 1.3.6.1.4.1.3711.24 Technology Centre Unite Technologies Ltd Willow House Llancayo Court Usk Monmouthshire it is used for the following devices Hawk-i 2 Power Hawk 2 Hawk-i 2 Eagle-i RMS Compact 2 I can provide the MIB if required Thanks Philip

I think it is configurable. NTA can listen on any port.

Looking for a Liebert vEM-14 SysObjectID: 1.3.6.1.4.1.13045.1.2 Would love to create some custom pollers to poll the water detection it is monitoring.

Jim, you are not alone! I have fought this problem with the jumping labels (and in some cases nodes) even before Network Atlas came out. I was hoping NA would fix it but still see this from time to time. I agree, it is frustrating and I find myself saving literally after each change just to keep from losing work. Also, I…

You could check the permissions the users have, from what I remember the user that is used with the API should have admin permissions. For our API integration we normally create a local account in Orion for the application. However my AD admin account can use the SWQL studio. Hope you have some luck getting this working.

looking at the name of the MIB you have noted here this is for the D channels. Normally there is only one D channel per PRI. You maybe looking for the active B channels for seeing how many are active in your PRI Take a look in the MIB Browser and see if you can locate it.

 The only thing you need to turn on that's not on by default is SNMP.

Please send us the ticket number, we would like to have full diags and (when possible) full SNMP walk of affected device. You can contact me also directly at pavel.spacil [at] solarwinds.com.

You could possibly use Custom HTML resource to host exactly the interfaces you want within the view you provide.

The last time I upgraded, 1.3.6.1.4.1.13732 (iDirect MIB) disappeared. Please return it to the DB

 That is something we've heard before, and we definitely intend to get that into Map Maker. We're planning to do some improvements to MM this year, so hang in there a bit and we'll get that to you.

My guess is that the group "Admin Groups" should probably be a list of your admin users, instead of admin groups (we probably used it as a placeholder in the NATO5/Library rule). If you have LEM hooked up to Active Directory, you could use an AD group there that contained all of your admin users. Alternatively, you could…

You can do it with APM, but not with just VoIP.

Does anyone know if this is possible?

This is something I have also searched for without answer? We experience similar problems and would like to have a professional polished look and feel. Also what would be good is to have the top header (menu bar) to match the configured column widths, we have some views that are more and the bar just suddenly stops which…

Here is what i did to pull the WSUS events from the server into LEM. I used the Windows Application Log connector. I hope this works for you guys. Thank you.

Just use useragent switcher addons and configure user agent string for firefox 3. Jean-Pascal