FormerMember ✭✭✭

Hi rob.hock, I've been tasked with upgrading our main platform to NPM v11, I was wondering is another RC after RC2 due? I would hate to deploy it later on this week and find another RC (or the GA) in the portal a couple of days later. Jon.

I ran the logadjuster.exe file as local admin, changed the "Orion" module logging ( checkbox next to the name was checked ) from DEBUG from INFO, clicked on "apply" and then closed/reopened logadjuster. The setting is still set to debug. I cannot change the settings! Well, I can, but they don't stick. Any ideas?

I found the logadjuster.exe file, all of the module logs files are set to "debug" mode. When I click on "set to default" in the tool, nothing changes. I think someone was troubleshooting the app, set the log files to "debug" level logging, and then accidentally clicked "set as default" button. 1) what is the default log…

You need to do the config block but also add: ( Must contain shutdown AND Must containt switchport access vlan 100 ) OR Must not contain shutdown This will do exactly what you are looking for: Lastly, you will need a rule for each interface type unless you do a Regex like so: \S+Ethernet instead of FastEthernet or…

I agree. I'd like to see that too. The Groups feature and Dependencies are pretty awesome, they just need to be given more power to customize. We are trying to shoot for a custom page like we had with IpMonitor.

Thank you for all the help guys! Just to close the loop on this, this is the filter statement that worked for the original question. Unfortunately im not enough of a statement guy to quite know why it works... but it works. NodesData.Caption NOT IN ('SERVER1','SERVER2','SERVER3','SERVER4') OR Volumes.VolumeType NOT IN…

I was afraid it was going to be query based. I'm attempting to hide things that have 'SpecificName' and VolumeType is Physical memory, but have so far been unable. I would need to do this for 20+ nodes which is why I was hoping there was a setting change I could make, but assistance with this filter statement would be…

Sweet! Underwear here I come!

1) Currenlty im using NPM v7 with database on another server. If i upgrade it to v8, will the same old database results be available with this new version? yes 2) Also, can i integrate Netflow Analyzer into this new Solarwinds so that from single webpage i can access both? yes what should be the upgrade steps? i mean…

I've got a similar issue. In my case, I have a Cisco 4402 Wireless LAN Controller which has been set to show the web view "Wireless Controller" but of course when I click on the node to view what I think will be a lovely wireless view, it opens the Node Details view instead. It makes no difference if I change the view…

Have you performed a rediscovery of the node?

 Dave, I'm curious about the slowness. Which version of Orion are you running? 

Hi Heiko, You can set the "From" in the email connector, and you can set the "Subject" in the Email Template. To modify the email connector: * Go to Manage > Appliances * Click the gear icon next to your appliance and go to Connectors * Search for "Email" and find the "Email Active Response" connector * Use the gear on the…

Craig, That's sounds like a bug we need to get fixed. Do you have a Support ticket open? Does the problem correct if you change the regional settings on your server? Denny

Have you run winrm quickconfig on the server? If the account is a local administrator on the remote server, and if so, are you able to login to the remote server and manage services? If the account is not an a local administrator you will have to grant permissions to the service manager for standard services and any…

This behavior looks like it might be a bug. Could you open a Support ticket? Please reference this thread.

best bet here is that the MIB is not reading correct. use the MIB walk feature of the Toolset and see what the MIB/OID is that is needed and then you may need to add a custom poller since it is not reading correctly as is.

Resolved my issue...wasn't actually anything with autologin...the problem had to do with the webparts we had setup in sharepoint referencing URL's that had changed in this release. URL paths are now all http://foo.com/Orion/bar.aspx, where before it was foo.com/.../bar.asp. We just have to manually update all of our links.

I would say that usually the only time i see index numbers change on servers is when the cluster servers swap over. Is your setup a clustered server?

I'm in the same boat. I have to do reverse engineering on the ForwardSyslog.trap file, and I have to guess the values for the different fields. Is there any documentation for these advanced altert trap templates? If so ... Where can I find it?

Jon, We just upgraded from v8.1 to v8.5.1 and it went well, better than I expected. We had broken links on all our custom views but we don't have that many, maybe around 20. This is documented in the Release Notes. The directory changed from /NetPerfMon to /Orion and the viewids were renumbered. So far, we have discovered…

Update 2: I changed my method a little and seems as though I am close to getting it to work. I can't figure out how to get the value of the OID into the trap. I am assuming it will be a variable that is assigned to Value=, but I don't know what it should be. I have tried "${NetObjectID}", "${PropertyValue}", and…

Update: I copied the ForwardSyslog.trap template found in the Orion program folder. I was able to send the trap, but I still need to understand the format of this file, and where I can find more info on the variables. I have edited the file to include one of the OIDs I want, but sniffer shows the Value as NULL. At first…

Hi Try the HTML resource and then imbed your page into iframes as an example, so you would need to know how to create HTML http://www.w3schools.com/html/html_iframe.asp Its located under Miscellaneous resources Kind Regards James

There are a couple of rules intended to look for systems (servers/workstations) that don't have agents using different kinds of activity we DO see via logs - "DHCP but no Agent" and "Authentication but no Agent". Firewall/network devices would be tougher though, I can't think of an easy way. There's not really a group like…

What are you using as your DHCP server?

Hi all. I've got a question about monitoring uptime. My requirement is to generate a report that lists availability M-F, 8-5. I'm thinking I simply query ResponseTime_Hourly and I should get what I need. However, there does not seem to be any data in that table. The setup I've got is: 1) detail statistics summarized to…

What I meant is not to create those. But rather to use the rest api to query this table. The credentials are already created by an authoritative person. I just want to query it. If I am not mistaken the entity catalog does not contain an entity mapping with it. Or is there ? Maybe there is a way to run an arbitrary sql…

dynamic mapping will be nice once it comes around but from your post you have not even been using the tool you have. it might be static but you have always been able assign links/interfaces to the connector lines between nodes. you can even assign multiple links to a line in the case of a port-channel Dynamic will be nice…

admin / password is the default - when you first logged in you were prompted to change it, though, so if that's not it and you don't know what it is, you'll probably need to reset the password. From the CMC, you can reset the admin password with the "resetadmin" command in the "manager" submenu. * On your virtual…