FormerMember ✭✭✭

Cisco: SW6509 IOS(tm) s72033_rp Version 12.2(18) SXF6 Can it Mirror the unable netflow port Traffic to the enabled netflow port. type the ip route-cache flow command and then ip flow-export destination 10.70.x.x 2055 thanks, weiping_zhou@dnt.net.cn via foxmail 发件人： darragh.delaney 发送时间： 2012年9月4日(星期二) 下午2:47 收件人： 伟平 周 主题：…

David's helped another couple of customers find the non-v5 packets they were sending, so even if you don't think you're sending v9 or v7, it might be there anyway. Now, on the engineering side, we are making changes to handle the bad packets more gracefully. The service shouldn't stop. We'll definitely fix that in 2.1.…

Great points Bob, when those 1080Ti cards start to get old and if they don't process transactions quick enough, time to get rid! With prices of bitcoin in freefall and NVidia currently messing about with its partners, the cards may get significantly cheaper.

Yes SNMP walk is my next task. Will be interesting to see what OID's are there for the ASICs miner, if any. I will get onto his PRTG setup and have a look too.

Yes lets break it down, This is a mining rig. And this is a ASICs mining rig, I've found a bit of software that will monitor the hardware but this software is limited to monitoring 1 mining rig only without significant investment, but obviously i'd like my monitoring to be incorporated into Solarwinds as I already have the…

noticed that if the log for the event viewer gets full, netflow collector will stop running and cannot be restarted until the log is cleared.

quote:Originally posted by hvits They are all 5. Ok, that was just a thought I had based on the "Unsupported NetFlow packet version" in the output you posted. I've no more ideas. Did you call tech support? Thanks, Olan

I am having this same issue. I start the service and it fails 10 seconds later.

Perfect! Thanks for your help ExpatYankee.

Thanks for the reply. I see that the custompollerstatistics_detail table has a MinRate, AvgRate, MaxRate. You are saying to update the new value to this table instead of custompollerstatus - right? If so then which field gets updated? I really hope you can help me figure this out.

If my thwack search skills are lacking I apologize Mark. Was that a v3 issue - mine is more specific to List Resources rather than node testing; v2 nodes work v3's don't. If I go into Edit Properties for the v3 node, the SNMPv3 Method needed to be set again (in this case SHA) then the test was successful; like it lost the…

Thank you both for your help, deleting the session trace files, will that affect our downloaded configs?

Sorry, EVA. Unfortunately storage isn't really my area of expertise. I'm just the monkey setting the monitoring up :) Jason

Hi, I did try the DNS hosts entry but still didn't work. The Desktop Console does work from other subnets, but still the web console fails unless on the same subnet as the server. A failure of the web console in subnet B doesn't stop it working in subnet A. We are happy to use the dekstop console, so we'll just ignore the…

Hi Floyd, And thanks, I'll try that. I also found that if I cut down the number of columns being reported the page prints with bigger fonts.

I read the document and that was why I came here to get some insight from the people who actually have it deployed and are using it. Things have a tendency to work differently than the designer expects. Appreciate your response, guess I should have put in the original post that I had read that document.

The trigger delay is 2 minutes

Thanks for the confirmation Lorenzo. I realized afterwards I'll just schedule FULL download of configurations once a month. Then I will always have a config if performing a purge on a two month window.

Just turned on AppInsight for Active Directory (quite by accident, since I merely did a discovery scan and added nodes). Event ID: 4648. “Attempted to logon using explicit credentials event for Active Directory on DC01” I am getting a "critical" status for application "Active Directory" which was cause for concern, and now…

Thanks that is certainly a help but if I assign my view for example to an IP and I then go to my main page and click on the node, I still get the old generic view?? This is because node comes up as unknown as Machine Type so it is taking view same as other Unkown types if I change view by device type and select unkown and…

Here is an example of a recent exploit on Linux: http://blog.zx2c4.com/749 -- contains link to www.youtube.com/watch If you watch the youtube video, you will see how a regular user is able to become root. This is why you do not want to allow password authentication for SSH.

If not then I would suggest changing it to an Advanced SQL: * Go to the top bar -> Report -> Show SQL * When in design view hit the SQL tab -> Copy all of the SQL * Create a new advanced SQL report, paste it in there This is the part that I'm having a problem with currently. It won't let me edit the SQL statements at all.…

The GROUP BY can stay and it would still run fine, but it needs to be changed so it doesn't reflect the removed fields (interfacetraffic.in_totalBytes). It's only when I try to select and join the Interfacetraffic table the the web interface in Orion stalls out. The database server spikes for a few seconds, then the cpu…

We don't support direct upgrade from anything before 7.8.5. You can contact Support for a copy of 7.8.5. Since you've started already, Support can also help you complete what you've done.

Unfortunately TFTP is not available in JUNOS, can I use scp?

Hi, also: Where do I look to see the old version of installer that is on the system now?

I guess I'm not sure where I'm supposed to add the java arguments. When I setup confluence there was a setenv.sh script I added the arguments to but in this application there is no such script I think.

Hi Josh, what's the updated download link for the offline Orion Installer? The URL at start of this post (https://support.solarwinds.com/Success_Center/Orion_Platform/Orion_Documentation/SolarWinds_Feature%3A_SolarWinds_Orion_… ) now only gives details on the installer -- without giving the Installer itself.

Does anybody know this, where it stored? There should be some sort of database to store all these OID values, names, Access types internally.

Hi, its for embedded Linux, not desktop, I can no execute command. Does this snmpd.conf file is standard for all Linux modifications?