FormerMember ✭✭✭

Not sure the new charts will help because if you have any switch stacks then you have an entry for each stack member. POE Consumption Watts pethMainPseConsumptionPower - LabelpethMainPseConsumptionPowerSwitch 1235Switch 2324Switch 3245Switch 4264

Hello, In DPA, there are con_alert tables as well that you can alert on. If I understand correctly, this would allow you to incorporate the last x times the custom alert had fired. Kathy

Apologies! I should have pointed out its the Additional Poller you would be looking for of course. Main Poller has SLX license and then Additional Pollers can be purchased. You never have two SLX Main Pollers on the same site as this causes issues. So you can have a Main Poller (SLX license) and (one or more) Additional…

Eric Chan wrote: actually, the system is hang on the page before login. i have tried to use different computer to connect with the web console, however, all results the above picture. i believe the physical server has enough resources to share with the virtual appliances since we are running SolarWinds LEM on the server…

Yo T! ( ;D ) So, is it possible to add Node(s) [to Orion.Nodes] via C# and the REST API, and if so, ya got any sample code? I've been reading the SDK doc (Orion SDK (1.8)) and the only example is for PowerShell and since I'm using REST, I've got no idea how to extrapolate that code into what I need. Help much appreciated!…

See this thread: It's something we're going to try to fix.

 In Orion 8.5.1, the footer of the web page identifes the current SP level.

Eric, A couple things off the top of my head... Did you configure the website for a specific IP address or leave it as '(All Unassigned)'? Make sure you're hitting the right address. One other thing that we've had a problem with in the past is the website not properly being started in IIS. If it's not one of those, I…

i have the same isssue.... my traps and syslog page take ages to run on both the core webserver and the additional webserver

Hi, When reading value of a cooked performance counter, Microsoft documentation says that you must read it twice the first time to initialize it : If the calculated value of a counter depends on two counter reads, the first read operation returns 0.0. Resetting the performance counter properties to specify a different…

I got it working!! Thank you so much for your help, it was the pollers I screen shot above which were the issue, the one shown I had to untick and retick them both and then none of the other routers had them ticked so had to go to each router individually and activate them. All working fine now! Thank you!

The Assigned Applications edit page and the Template edit page should look different. The Top XX component monitors should look different. The differences may be hard to notice unless you're looking at them side-by-side. The changes just look right.

thanks a lot :-)

To be clear, v2.5 is available to existing customers. If you are downloading the EVAL from SolarWinds.com, then it's still v2.0, but that will change shortly.

Thanks sja. That's what I decided to do. Way too many issues reported with 11.5 right now. We just upgraded to NPM 11.0.1 and are preparing to go to NCM 7.3.2. But, I'm still looking for my question to be answered... can we stop all services on NCM 7.2.2 standalone server and install NCM 7.3 on the NPM 11.0,1 system and…

You can poll virtually anything with the UnDP, but I'm just curious as to whether you had problems with it polling this device out of the box.

Hey Tim, Okay, fair enough. Thanks!

Hi there i just stole your config and made my own, and the only problem i found with it, was that in your working-hours report config, you need to update the filter so that the Hours-of-day group is set to ALL must apply, not ANY The OUT-OF-HOURS report should still be left as any, otherwise you woudl get no results. I…

Jiri, Sure would like to see option to "purge all configs prior to last baseline config" added in vNext.

Justin, did support say when the functionality might be added? 8.5 or 8.6?

not sure if this will help but when you deal with Telephone Companies then it will always be set up as follows T-1 = 1,544,000 or 1,536,000 depending on CSU overhead E-1 = 2,048,000 but when using ethernet speed then it usually defaults back to true numbers where 2Mbps = 2,000,000 So depending on what you are monitoring…

Just thought since you would be looking here i could share with you my Solarwinds screen shot of the day.

Paul O'Rourke in support had me try the action below which fixed the problem. To register the WMI Scripting Type library: * Download <span style="color:#336699;">swregtlib.zip</span> and extract the swregtlib.exe program to your Orion APM server. * Click Start > Run on your Orion APM server, type cmd in the Open field, and…

hi there, basically, i have a custom view with lots of html on... each graph is indeed on metric which means you have a lot of graphs, but it looks OK. it was basically a lot of cutting and pasting and just modifying the node ID to get the next node. i would advise splitting the servers up into technoloogy areas as you…

Without more info, it's hard to tell what's going on. It's possible you configured an incompatible tool (e.g. windows tool on linux), or there's a permissions problem accessing the log file (make sure the user running the agent, if it's not root, can access that log file), it's pointed at the wrong or a nonexistent log…

Holy Cow!! This is Express edition. That's why this feature is not there :(

Same here, having the same issue. Were you able to get a resolution?

The connector will connect to both the 'admin' and the firewall logs, so you will see things like logons to your management station and policy pushes in addition to all the firewall blocks.

Hi aLTeReGo & ">jacob.west Thank you very much for your help and information. I look foward to update Solarwinds to the latest version. When I will have the chance, I will give you feedback. Regards

Hi Gob, I attemting to repeat what you did, I have my trigger query and reset query in the AlertDefinitions table, but I would like to know what you did in the TriggerDesign & ResetTriggerDesign columns? Did you clear them? Regards Mark