Fodome

Hello adamd2929, One way around this would be to use the External Process Monitor with a script to monitor the TotalVirtualMemory. A script is available here that might give you what you need: Feel free to customize the script to meet your needs. It also includes a readme file explaining how to call it from the External…

Hello, In order to Monitor the state of the RAID Controller Card, the state of a disk in an array or the global status of the array environment, simply use the following steps: 1. Click the "Devices" tab. 2. Select the Dell Device you wish to monitor. 3. Click "Add -> Add New Monitor". 4. On the left-hand side, click…

Hello pblosser03, My guess is that the Senturion uses different OIDs in order to get the values for temperature and humidity. Were MIB files included with this Device? If so, could you possibly open a new case online at http://www.solarwinds.com/support/ticket. Once you get the email stating that a new case has been…

Hello Chaldz, The ability to request Min, Max, Median and Percentile is currently a feature request. Until then, you would need to use the report's zoom option in order to zoom into the time frame with the highest average to see what the max value is during that time period. The other option would to create a report with a…

Hello AndreyKAZ, The following page contains a tree with all OIDs/MIBs available to be compiled for ipMonitor's SNMP database. http://ipmsupport.solarwinds.com/mibs_builder.aspx If the MIB files you wish to add are not listed here, you would need to get them from your provider and send them to us via a support case. A…

Hello Chaldz, At this time there is no option within Mass-Edit to modify this new feature. I will submit this as a feature request. In the meantime, there is a possible workaround: 1. Click "Configuration -> Settings -> Export settings" 2. Only check "Monitors" and click "Export" This will give you the XML of all of your…

Hi Chaldz, This is currently a feature request. I have created a case for you and attached it to the feature request in question. I will notify you if and when this is implemented within a future build. Sincerely, Chris Foley

Hello Adam, This is not currently possible within ipMonitor, but is planned for implementation within the next version of Orion. If you have any additional questions, please do not hesitate to get back to us. Sincerely, Chris Foley - SolarWinds - Support Specialist Support:866.530.8040 |Direct:512.682.9385…

Two things come to mind that could cause this: 1. The system might be running out of ephemereal ports Next time this occurs, run the following command on the ipMonitor system and see how many connections are currently established: netstat /an Also try a tracert against the remote system to see if pings are even leaving the…

Hello Scott, At this time it is not possible to mass-edit Devices in any way but it is currently on our feature request list (TT 2215 for internal folks). Having that said, you would need to add the tags manually for each Device. As a better solution, why not using ipMonitor's grouping capabilities to sort your Devices…

Hey chaldz, Originally I was going to say that this would be possible using a Custom SNMP Monitor, however, it turns out that if a service is not running, it simply does not exist in the OID branch. As a result, the Monitor would fail automatically. The other option would be to simply monitor the process and if it is…

Hi Martijn, When you run the following command, what directory do you run it from: plink.exe USER@SERVER -pw PASS -ssh ./test.sh What directory is plink.exe located in? Thanks, Chris Foley | Support Specialist SolarWinds | IT Management, Inspired By You Support:866.530.8040 || Fax:512.857.0125

Hi Computer99, The difficulty is that RFC5424 defines a completely different format for Syslog messages. As a result, we would need to add support for both within Kiwi Syslog Server and we would need to add a parser to detect the format of every single incoming syslog message. This would considerably slow down the amount…

Hi ChrisR99, I am not sure if I've understood your scenario correctly but I think I can still answer your question. Basically, if a Monitor is dependant on another Monitor which is presently failing, all alerting will be suppressed on the former. Even if the Monitor is a member of 12 different groups and 8 different…

mlzth, This is possible by using an htm file which automatically passes the authentication information to ipMonitor. Such a file can be provided by the Support Department after you have opened a case via the following form: http://www.solarwinds.com/support/ticket Sincerely, Chris Foley - SolarWinds - Support Specialist…

Hello, The bottom of the Devices pane has a Filter option. A screenshot can be seen here: http://www.kiwisyslog.com/help/cattools/pan_devicesfilter.htm Hope this helps. Sincerely, Chris Foley • SolarWinds • Technical Support Office Hours: Mon-Fri 8AM-5PM EST 866.530.8040 ______________________________________________…

Spagman and co, Keep in mind that if you backup your ipMonitor installation using the Internal Maintenance's Backup feature, you are only backing up your configurations. If you wish to also backup your ipMonitor installation's historical statistics, I also recommend backing up the following directories: * \ipMonitor\dbtmp\…

Hi dmagnavill, Create a Maintenance Schedule which disables this Monitor at 10:04 AM and keeps it disabled for 23 hours and 55 minutes. The only thing to watch out for is if you restart the ipMonitorSrv service or reboot the ipMonitor system. When this occurs, the Monitor will be reenabled. There is currently no other way…

Nevermind. I see that you have already opened a case. Sincerely, Chris Foley | Support Specialist SolarWinds | IT Management, Inspired By You Support:866.530.8040 || Fax:512.857.0125

Good day, This will require some investigation. As you are under maintenance, can you possibly open a new support case using the following form: http://www.solarwinds.com/support/ticket We will need to have a look at the following file to start: -\ipmonitor\logs\ipmfatal.log Thanks Chris Foley | Support Specialist…

Good day h4ng0ver, The following article explains how to do this: http://support.ipmonitor.com/tips/ab54c992f2c8468bae7c1c2968dee41b.aspx In in a nutshell, open \SolarWinds\ipMonitor\wwwroot\stats\override.css and alter the color codes for each status. If you have any additional questions, do let me know. Sincerely, Fodome

Hi Ahdinko, I believe SReagan might be onto something. Perhaps the ipMonitorSrv service is being stopped by something. As a result, your ipMonitor web session is being terminated, which requires you to log back in. Having that said, I recommend looking at the Windows Event Logs on the ipMonitor system for any clues…

Hi Valsilva, You'll want to use the exe if you are installing the Log Forwarder from the workstation or server's console. You'll want to use the msi if you are deploying the Log Forwarder to multiple workstations/servers from your domain controller. Sincerely, Chris Foley - SolarWinds - Support Specialist…

Hello lemmiwinks, Did you ever figure this out? If not, what Communication Type are you using within the Drive Space monitor? If you open the Drive Space Monitor for the C: drive and then click the "Select" button, does it list the other drives? Let me know, Chris Foley - SolarWinds - Support Specialist…

Hi Andrew, You can do this by going to "Configuration -> System Settings" and clicking the "Enable" button within the "On Process Start" section. Here you can provide your email address. Then, click the "Enable" button next to "Continue to Send an Email" and configure it to send every 24 Hours. Click OK. Another way to do…

Hi Walter, Can you possibly open a support case for this issue using the following form: http://www.solarwinds.com/support/ticket Thank you, Chris Foley - SolarWinds - Support Specialist Support:866.530.8040 || Fax:512.857.0125 network management simplified | solarwinds.com

By the way, make sure to replace "c:\winnt\system32\" with actual location of your Windows' \System32\ directory, such as c:\windows\system32\. Chris Foley - SolarWinds - Support Specialist Support:866.530.8040 |Direct:512.682.9385 |Fax:512.857.0125 network management simplified | solarwinds.com

Good day JCSR, Calc.exe is not a good executable to use because it does not self terminate itself. As a result, the Monitor will eventually fail with a timeout (assuming the Monitor is configured correctly). Rather than helping you configure the Monitor to run calc.exe, I will help you configure the Monitor to run your vbs…

Hi PTSpaul, The ability to report on the values returned by an executable to the External Process Monitor is currently a feature request which may find its way in a future version of ipMonitor. At this time, reporting on these values is not possible. Sincerely, Fodome

AdamMetcalfe, If you are using ipMonitor 10.0.1 or previous, it will ask you for two passwords: -Your Current Password: This is the password of the account you are currently logged in as. -New Password: This is the password of the new account you are creating. The former has been removed in ipMonitor 10.5. Sincerely, Chris…