CourtesyIT · Managing Director · ✭✭✭✭✭

When you run the Config Wizard, have you set your USER ACCESS CONTROL slider to the bottom and ran "as administrator". Control Panel > User Accounts > User Accounts > User Access Control Settings > slide bar to the bottom. 

Just had the same issue. I was trying to setup connection profiles and saw that I had TFTP selected. I deselected TFTP and issue resolved without a reload. This is a good through and was able to clear a problem without opening a case. 

how about a Nice Chair for a Mission prize? I am tired of sitting on a metal folder chair.

mbrison‌ I do not have access to the Palo Alto's any more. Old job.... new job we used ASA....uuugggghhhhhh!

odehabu Once you execute the remediation script you will have to download the running configs again. Then rerun the Compliance report. 

No, you just have to look at your agents on the server, HIPS server, and your workstation to find the "blocked" transaction. Unfortunately, I have had too much experience in dealing with this, getting it corrected, and developing policy exceptions to do what is needed to be done.

did you get a resolution for this issue?

I would start my config block at: ^aaa new-model end my config block at: ^! for cisco devices.

Did you remove any registry entries? System Firewalls / Anitvirus / HBSS (usually the case for those of us)?

Ok Ricky, Here is how it works out. I am not a regex pro either. But it will look for which ever type of port you may list down below. Fast|Gigabit|etc..... Just how ever the device lists its ports. 1. Import the report into your solarwinds NCM. 2. Go to Policies and associate this rule to a specific device 3. Go to…

makecrazy‌ I am redoing the Juniper reports at the moment and should be out soon. If you find a juniper device that is running SSH and would like for me to build you a custom report let me know the CLI command that would satisfy your request. Thanks,

orioncrack‌; I understand your frustration and have to say I have never had a problem. I usually use either IE or FF browsers to work on my Solarwinds. If you need work on your Solarwinds you could always just use FF and then use Chrome to due other web based activities. Best of luck,

mkomeara‌ sent you a pm. 

Information Type OID Name OID Value Bandwidth - 32-bit Counter ifInOctets 1.3.6.1.2.1.2.2.1.10Bandwidth - 32-bit Counter ifInUcastPkts 1.3.6.1.2.1.2.2.1.11Bandwidth - 32-bit Counter ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12Bandwidth - 32-bit Counter ifOutOctets 1.3.6.1.2.1.2.2.1.16Bandwidth - 32-bit Counter ifOutUcastPkts…

Please do not forget to mark "Answered" if this solution solves your issue. Thanks,

Ok, I might be getting the hang of this. I was able to put :::: AND Vendor = 'Cisco' ::: at the end of line 17. 

So rschroeder‌ I am guessing the amount of Management traffic is not effecting your production traffic over your WAN links?

yes, we do use NCM... Would you be able to share your scripts/code.

I would be interested to see if the additional webserver makes a difference. I was talking with the solarwinds federal team last week at a conference about additional webservers and the advantages of using them verse directly off the Orion Core.

cnorborg‌ I have set this up as a Custom Query Resource on my Configs Tab. It does a good job a counting the ports but I seem to have one more extra port on my devices. I am looking at my WS-2960G-8TC-L and WS-C3550-12G switches. I am getting 9 and 13 ports respectively. Thoughts?

I have concerns about the operations due to some of my low-bandwidth/High Latent circuits from US to Euorpe/Pacific. I also have concerns about the SQL Database portion of HA. Eric

hello-world Have you tried to do an SNMP-Walk on the device to see if a MIB is there to help you manage that %? 

michael.t.koehler.ctr@mail.mil‌ and 31cs.scoi.1@us.af.mil‌ was the error above the one you were seeing? I have forwarded and notify the product manager to help investigate this issue. Thank you for your patience. V/R Eric

do you have NCM on your internet connected network?

I just hear him fuss about using the application, navigating around, and working with it. Just a sounding board for him.

You should write up a how to on this one, this is pretty cool and I would like use. 

dclick, Have you received an answer to your question from christine? 

I have posted them on Thwack using the SolarWinds-Orion-NCM-v6.1-NPM-Integration module. thanks, Eric

any ideas Jiri? 

fcpsolaradmin‌ I ran into the same issue. I did what you had mentioned above but my nodes in Network Atlas Objects are still missing and I have several objects (Nodes) that are "Unknown". Any additional thoughts?