Comments
-
Hi , Can you please help me with variables for Accesspoint down alert ..
-
Thanks mate , it worked !.
-
which one should I add under Messaging.
-
May be we can remove the sfp port if it is not being used ?
-
Can we use the sme poller for 9200 which you have created ? or it will differ ?
-
We have to assign poller from the correct polling device right ...Suppose say we have 3-4 polling engine and on all 4 polling engine I see same poller is assigned ..If I have to change the poller .I can do the change in any polling engine right ?
-
SWQL studio will be available in Solarwinds server ? Can you pls guide ?
-
We have ssigned the correct poller on 9200 switch on Solarwinds server but on Solarwinds tool the statistics still shows incorrect value . After assigning the poller will the statistics get corrected automatically with sometime? or should we unmanage and re-manage the node ?
-
Whenever an AP goes down , We should get an alert in Solarwinds alert section saying an AP is down . To achieve this which alert we have to enable ?
-
thank you @"dilbert1234"
-
OK so as per the below steps should I run the scan 2 times one each with community string ? Run SNMPWalk.exe. Enter the IP address of the node under Agent Address or DNS name. Select Version 2c or 3, depending on the node configured. Enter the community string configured for the device. Scan and save the SNMPWALK file.
-
when I run the snmp command on switch I see the configuration as below , So does it mean ,we are using snmpv2 ? Switch#show run | i snmp snmp-server community sarpub RO 98 snmp-server community privind RW 99
-
How do we check the version on the device ..."show ver | i snmp" does not give version information Go to C:\Program Files (x86)\SolarWinds\Orion. Run SNMPWalk.exe. Enter the IP address of the node under Agent Address or DNS name. Select Version 2c or 3, depending on the node configured. Enter the community string…
-
Model : Cisco C9200L SOFTWARE VERSION : 17.3.3, RELEASE SOFTWARE (fc7) SOFTWARE IMAGE : CAT9K_LITE_IOSXE Solarwind is displaying the ROM output ..We should get RAM memory statistics ...
-
We increased the memory from 32GB to 46GB ...now the Solarwinds is stable ...
-
Can anyone please advice ?
-
My question is how do i add url monitoring in Solarwinds …
-
Do you think we have to increase the memory ? Or should we ask Server owner to open a case with vendor to check possible memory leak issue on the server ?
-
We are facing similar issue .. Can anyone advise on how o troubleshoot this issue ? What services need to be checked in Solarwinds Server related to reporting !