Apocalypse21

We need this. Great suggestion OP.

Is there a resource you can point me to that shows how to add alerts for OSPF routing table changes?

Hi Jiri, Really excited about the EOL/EOS information being included in NCM. We are a large multivendor environment and one of my biggest problems is keeping on top of this information. It would be extremely helpful if HP information was included in this as well as their acquired companies H3C and 3com. When will those…

this is a great suggestion!

<Bump> I would like to know if this enhancement is being added. I agree that this is a basic status of an interface that should be included in NPM.

We are currently expanding our IPSLA Operations setup and have run into a small snag. For IPSLA VoIP operations we are required to specify an IP address that is not resident on the Cisco ISR. The IP address we are required to use is in an IP range that will ensure the TOS settings are maintained across the WAN. This is…

Now I'm the guy bringing this back from the dead. I'm wondering how you could possibly get a count for these "utilization exception" events for monitored interfaces and put them in a report thats ranks them highest to lowest based on that "exception count". Does anybody have any ideas?

I have had no feedback but I did create a feature request. Please upvote! http://thwack.solarwinds.com/ideas/3787

I have submitted a case.

Hi Jiri, Is there a way to make this the default? We don't allow a lot of our users the ability to customize views which is required to make this change. Unfortunately the line numbers botch up the ability to do a nice copy/paste into a config! Thanks, Dan

Below is the response I had from tech support: Update for Case #476567 - "Blackberry Z10 browser not working with Solarwinds Orion." Hello ***, Thank you for the very insightful information regarding the new Blackberry. Unfortunately, after speaking with our developers, the news is not good, as the browser is currently not…

One of our techs posted this in a Cisco Support forum (https://supportforums.cisco.com/thread/2175696) and received the following response: § This is a limitation imposed by IOS and no solution from IOS perspective to overcome this. Upon reload the indexes would not be persistent and rediscovery from NMS is required to…

We are seeing the same thing on a number of our 3750x stacks. Was there any resolution to this?

I would like to know how to do this to. Interestingly solarwinds has a post that seems to indicate this is possible but I haven't found out how to do it. Look here: Geek Speak and see the post that vinod.mohan put up on route flapping. Near the bottom of his post he says the following: Route flapping is one of the reasons…

Can we make this a feature request? It would be very helpful.

i have confirmed the same issue...

Prior to the forecasting function that is now available we had built a report that essentially "counts" every time a circuit is polled and its Rx or Tx throughput is >90% over the last 30 days. We snapshot this report at the end of every month which allows us to trend circuits that are seeing regular "saturation" or are…

This is an old post but I came across this myself and figured I would reply. It seems that there is an issue in some firmwares prior to A5500EI-CMW520-R2215 for this platform. You can see the release notes here: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03557213/c03557213.pdf Below is a snippet from those…

In the Ad-Hoc reporting area is there a way to make the "Port Description" field stick? This is a field I always like to see and by default it is deselected... In addition, it would be really helpful if you had the ability to filter that list based on "Connected to" or "Vlan" fields. I do understand this can be done after…