vrkvvj · Senior Engineer · ✭✭✭✭✭

Comments

  • Thanks Muckman! However, that would end the total purpose if i alert on component.I want to alert on application
    in Component Messages in Application down alert mails Comment by vrkvvj February 2019
  • Hi Charan- i do not see any IP Address associatd to Interface in SW. And BW util is related to interfaces, so it is impossible to have it. So please let me know if it is otherwise. Regards vrkvvj
    in How to monitor Bandwidth utilization on IP address basis Comment by vrkvvj April 2020
  • I dont think it is related to Trap or Syslog services. Please try to restart the services on MPE and AWS(if applied) and see. If you are still facing the issue, then restart the server. Let me know if you have already tried these steps. Then need to check few logs before starting for website re-configuration.
    in Orion NPM Web page error: Solarwinds.ApiProxyFactory.TransientApiProxyException was thrown Comment by vrkvvj July 2019
  • Hi cs2968- Mainly SolarWinds Collector Services is responsible for polling data processing and requests. Prepares data for the persistence storage. And from above errors i can see that few devices are not able to respond to few OID's. So check if they are really important to monitor(like by configuring a report for all…
    in New SolarWinds Admin Issues Comment by vrkvvj July 2019
  • robbsmithwi​ - Have you tried Protocol status description parameter? Where we can ignore Down status as well Please refer below link Success Center Let me know if it helped or you have already gone through it
    in BGP Monitoring - ignore Admin down? Comment by vrkvvj December 2019
  • shashie.e​ - The following templates are included out-of-the-box and allow for simple log file monitoring as you describe. * Windows: Log Parser (PowerShell) * Linux/Unix: Log Parser (Perl) Hope it helped
    in Log File monitoring in solarwinds Comment by vrkvvj July 2019
  • Hope this helps Success Center
    in SSL Certificate expire alert template and alert creation Comment by vrkvvj July 2019
  • Please select "Status" parameter as you have provided custom thrsholds, the interface status also changes respectively. Status equal to Warning/Critical as trigger condition should work. Hope it helps!!
    in Need help for trigger condition for Custom port utilization Comment by vrkvvj August 2019
  • That looks interesting to work on. However we do not have that possibility i am afraid. My suggestion would be to create two properties like test_mp and test_int(Y/N). Please let me know if you have found or did anything else. There is no Good day/Bad day! Good day gives happiness and Bad day gives experience!!
    in Custom Properties Customization Comment by vrkvvj December 2019
  • Found this out from documentation which explains the statics are calculated from MIBs Change the MIB used for polling hardware health statistics Also from below link, it says thresholds are already configured on the device. Use Orion Defaults Use thresholds configured on the device. This is the default setting Edit…
    in Managing Hardware Sensor Thresholds Comment by vrkvvj July 2019
  • Below link might be helpful Default Orion Hardware sensor logic
    in Managing Hardware Sensor Thresholds Comment by vrkvvj July 2019
  • Hello Dhinagar- If you search you should be able to find it because i have created a lot of reports for availability in web console. Now i do not have access to the Solarwinds, so i can only show demo report output. Let me know if I am missing anything.
    in Web Based Report - How add Node availability in a Custom table Comment by vrkvvj July 2019
  • Hello imassey​- As per my understanding, you need to execute a script whenever threshold is met adn alert is fired right? We have a trigger action named "Execute a Script" and i tried using power shell script which functions perfectly fine for me. But i do call API and try to forward the respective alert/event to third…
    in Running a program on a specific server on an alert Comment by vrkvvj August 2019
  • parthiban_rajen​ - We have default property of a node - 'Location'. You can try using to generate the report. If that doesnt suffice then you can create a custom property (lets name it 'Country') and end up manually entering data or the required servers and eventually pulling the report based on region. Hope it helps
    in CPU Utilization Report Comment by vrkvvj September 2019
  • Try repairing the network atlas from control panel. Also check if you are able to connect to default db in db manager(PE>search for database manager) =>this step ensures that db connection/sync is happening. If there is no issue, then try checking the information service v3 logs for similar kind of error. Then try…
    in Configuration Wizard error Comment by vrkvvj July 2019
  • Hi mbrownoutside- If the resources are not listed on the node, it implies they should not be under monitoring right? Or Else they are under another node? Let me know if I am missing anything
    in How do I exclude volumes of Network Disk type from Volume Capacity Forecasts? Comment by vrkvvj July 2019
  • Hi Steve- I have generated lot of custom time framed web-based reports for availability. If you scroll in the same tab mentioned above screenshot, you will be able to find it.
    in Web based availability with custom date range. Comment by vrkvvj July 2019
  • rdcurry​ - It is similar to configuring in NPM, i.e.,custom property editor tool is the one you should get hold of. There you will find ,if there are multiple modules installed, for which module you want to configure while adding a custom property. I am 100% sure as i did for SAM module, however now cannot check for other…
    in Custom Property Editor for SRM Comment by vrkvvj July 2019
Avatar