verwin_u ✭✭✭✭✭

hi @hebron1212 Yes. it explains in here. *** i tool the screenshot in orion demo. https://documentation.solarwinds.com/en/success_center/nta/content/getting-started-guide/nta-how-nta-works.htm…

Hi @superfly Its impossible you have successful backup if you have Hmac issue. How can ncm ssh and run back up if ncm cannot ssh to your device. I highly recommend reporting it to sw support to further check this issue.

MAC algo are fully supported. There might be wrong in ncm component. This require further investigation with our sw suppprt geek. I highly recommend creating a support ticket to our sw support geek to check the "weonlydo" component of ncm.

hi @kerry.kielty what is the version of your SolarWinds NCM? ETM MAC algorithms are supported way back 2024 version. the latest version now is 2026.1. i highly recommend upgrading to the latest or newer versions if you are in the older version of solarwinds. in case you are in the newer version, i highly recommend creating…

hi @twzbowser your issue needs couple of considerations. in the job, is it all 9300 switches? do you have other device assigned in the job do they have the same old version of ios? they might have differences in the prompts. which may lead to this kind of error and will fall into template issue. for such issue, i highly…

Aug28 answer key seems incorrect

Hi @"gwarn70" , There would be lots of possible things. NBAR is one of the possible option to monitor port 22 1. 60m of data might not reflect in your top takers. 2. nbar is not enable is the router or switches where sftp is passing. 3. once you able to see post22 in your top talkers (netflow or nbar), you may now create a…

Hi @"DineshKandeeban" @"donrobert5" is correct. The short answer would be YES. Solarwinds supports and able to parse all netflow protocols (sflow, jflow, netflow, cflow, ipfix and the likes.) For your issue, you need to validate if netflow packet was recieve by sw nta. You may also check the nta event for you to have a…

Try to use the build it swis query in orion. /Orion/admin/swis.aspx assembly error is common with db structure or version error. Using the built in swis query will avoid such error. If problem atill persist, its really better to reach out to sw support geeks as its probobly a structure or bug issue. 

Hi @"shocko" NTA validates the interface id of netflow source and netflow data. To get this interface indexes, You must add your hyper-v. Then from here, NTA will automatically identify the interface indexes of these netflow data. https://documentation.solarwinds.com/en/success_center/nta/content/nta-vmware-support.htm

Hi @"Pravin_sandanshiv" That is a defailt feature of solarwiNds NCM. https://documentation.solarwinds.com/en/success_center/ncm/content/ncm-managing-end-of-support-and-end-of-sales.htm If you are having issue with this one.Feel free to call our support geek for assistance. 

Highly recommend to have it check with sw support geek. Most likely theire is different in its interface index. 

Hi @"surnaihai899" Need to validate if netflow packet was recieve by sw nta properly with complete flow data. You may also check the nta event for you to have a better visibility why sw nta is not displaying nta data of your switch.…

Hi @"akhasheni" Your meraki config looks good. https://documentation.meraki.com/MX/Monitoring_and_Reporting/NetFlow_Overview One of the screenshot says sw didnot receive any netflow traffic from your device. I highly recommend review it via packet capture. Sw has validation when accepting netflow data. It has mandatory…

 @"robert777" @"Deltona" is correct. Netflow are for network device like, router and switches. https://www.solarwinds.com/netflow-traffic-analyzer Netflow analyzes the packet level data of your device that is why more of the configuration are with your network devices. Feel free to ask your network vendor to configure and…

Hi @"ttripp1" This is more od flow record issue. Please refer to cisco cpnfig below. https://www.cisco.com/c/en/us/td/docs/dcn/nx-os/nexus9000/102x/configuration/system-management/cisco-nexus-9000-series-nx-os-system-management-configuration-guide-102x/m-configuring-netflow-10x.html If problem persist.i highly recomment to…

Hi @"curraja" You can download a device template base on your device brand and model. https://documentation.solarwinds.com/en/success_center/ncm/content/ncm-importing-a-device-template-from-thwack.htm You may also manually create ypur own device template.…

 @"willNetwork" Theres something in your device template. I highly recommend you create a support ticket to our sw geeks. They could run session trace to fully identify whats happening in your device template and device prompts. @"TuesdayRain" is one of the best application engineer i know in solarwinds

The Main Polling Engine (MPE) and Additional Polling Engines (APEs) in SolarWinds share information for various tasks, including High Availability (HA), alerting, job scheduling, and messaging. The MPE handles core functions like the web console, reporting, and APE management, while APEs focus on polling and gathering…

SolarWinds requires connecting the main polling engine to additional polling engines (APEs) to increase monitoring capacity and distribute load. This helps prevent the main poller from becoming overloaded and allows it to focus on core functions like the web console, alerting, and reporting. Additional polling engines can…

Hi. Log in to the SolarWinds Platform Web Console as an administrator. Click Settings > All Settings. Under Product Specific Settings, click NCM Settings. Under Config Settings, click Config Settings. Locate needed values and change. Click Submit. You may locate it in NCM settings. If you are having problem locating these…

Hi @"avivi" Yes you can change it. You can set it base on your backup policy and standards. Please note that it will have an impact with reapect to db size and volume size. Reference: https://documentation.solarwinds.com/en/success_center/ncm/content/ncm-configuration-settings.htm

Hi @"ericeclifford" Need to validate if netflow packet was recieve by sw nta. You may also check the nta event for you to have a better visibility why sw nta is not displaying nta data of your switch. https://documentation.solarwinds.com/en/success_center/nta/content/nta-last-25-traffic-analysis-events-sw611.htm Solarwind…

Hi @"brianslocum" Refer to your ntm discovery schedule. ;-) https://documentation.solarwinds.com/en/success_center/ntm/content/ntm_scheduling_a_discovery.htm

Hi @"dparmar" Need to validate if netflow packet was recieve by sw nta. You may also check the nta event for you to have a better visibility why sw nta is not displaying nta data of your switch. https://documentation.solarwinds.com/en/success_center/nta/content/nta-last-25-traffic-analysis-events-sw611.htm Solarwind nta…

 @"Rolfey83" You may use flow navigator to identify all necessary data from netflow. https://documentation.solarwinds.com/en/success_center/nta/content/nta-creating-custom-views-with-flow-navigator-sw1200.htm ***note - You must be familiar on source ip of pentest activity - you must make sure that that pentest activity…

Hi @"akanechan" NCM validates it base on ios versions and config settings. If vulnerability report seems questionable. You also need to validate if you have the correct MIST Vulenrability data source. Reference:…

Hi @"evivas-ndc" , As i promote support geeks, my question now is what happed to them Have you inform them that you can identify jumbo packet via cisco show command -- show interface. You can use NPM-UNDP if you know the specific OID of packet size. You may inquire to cisco if they could provide you that oid? Else, best…