tctsl

Ok,Fine Thanks.

Then match up the SSH protocol settings on NCM. I assume the SSH Key has been generated on the devices. Could you please explain abit on this contect?

Supefly, Thanks for your suggestion..It works perfectly!!!!!! Velmurugan

Superfly, What would be the impact if i do this re-sync process?Kindly advice regards, velmurugan

Jiri, So Once we get the access , we need to go to Start-->Solarwinds-->Network Configuration Manager GUI to enable this Auto back up . Is this correct? TCTSL

When I go to the properties to edit the hyperlink of the parent map which s having 2 maps inside it. I am seeing like the screenshot attached.Kindly advise how can i edit the hyperlink to make only one map effective from the 2 maps.

Thanks Zak. I tried to change the communication settings from individual node. In the request configs & Transfer configs tab, I can see there r few options like Telnet,SSH1,SSH2,SSH auto.SNMP Can you tell me what is the difference between SSH1,SSH2,SSH auto,SNMP.Is this something we need to change.Because for the problem…

Thanks for your reply ET...I tried the ways you have mentioned.But still i cant see the statistics. Mean while now only i infered one thing, that my interface statistics is been working good before apr 6th..After that, somethng happened to my SW which stops the interface statistics.Kindly see the attched.

Jiri, Really Thanks for your Quick response. Now I can go to my manager confidentally to ask for the access to that server. Regards, TCTSL

ZZZ, Thanks for your comments. Could you please explain about this below point on how to enable it in Solar winds.(Kindly provide the option to enable this in SW) Note that normally if any one node is down as part of the group, it goes to warning, which is yellow rather than red. You'll need use user graphics that has red…

Hi Tony, Thanks for your reply. I am very new to SW , started using this tool since 3 months back.I checked the option you have told(Manage Dependancy). From my understanding , this option will use to suppress the unwanted alerts triggering from the child nodes. But I donno how can we use this option in the Atlas Map tool…

Hi Superfly, Thanks for your help . I ve added the devices into NCM & can able to see the Downlad option. TCTSL

Thanks for yoru reply. In my case, the servers are going to be removed totally . So we have to get back the IP Address into the available pool . Our transient period value is default . becuase we have all our hosts are static IP's. So just wanted to know that this transient state behaviour is normal for all the devices or…

No, I have checked in the Alert manager...All the configured alerts are enabled only.

Hi Zak, Thanks for your comments. Actually we have already done those settings.Few devices I can able to take the back up. But for some devices only, I am getting the above error. Especially for some cisco devices , I am getting the error as Connection refused by Host. Please tell me , why i am getting this errors. Thanks,…

Thanks Zak, I have got this info from this below URL. SolarWinds Knowledge Base :: Why do my custom map tooltips show the variable name instead of the value? Thanks for your help. Regards, Velmurugan

Zak, Thanks for this. What is the variable to check the Interface Transmit Bandwidth & Receive Bandwidth? Please give me a link where i can get all this variables details. Regards, Velmurugan

Richard, Now the requirement is to get the alerts with respect to power issues only in Cat 4507,Cat 2950 & Cat 37xx stack switches. Cat 4507 is having dual power supplies & the remaining are having single power supplies only. Also we have one main UPS for the Datacenter. Now we want the alerts from this devices when there…

Yes...we have used that SNMP & ICMP recommended option only.... We had added this devices around 2 months back....

We are using NPM 10.3.1 . Still facing ths issue. The nodes which discovered in this types are automatically went Down as expected.

Hi Now this is again working fine , we started the SolarWinds Job engine V2 which would cleared this issue i guess. But it is now working Thanks for your help Regards, Velmurugan

Hi , We had again started the SolarWinds Job engine V2 from the services. After that , this error dint come. Now we can able to add the devices. Thanks for all the help. Regards, Velmurugan

Hi All, Can anyone please advice for this issue. I am using the NPM version 10.3.1. Velu

Kindly can some one help on this issue.Please advice your comments on this? Thanks, TCTSL

Hi Tony, Thanks for all your help in this.You are very much helpful I got couple of new things from your help. Regards, Velu

Team, Can anyone please help me in this? Is there any option to tweak the alerts like above. Kindly advice on this. TCTSL

Hi, Kindly can anyone please suggest for the above query please. TCTSL

Hi All, Could anyone please explain what is the original cause for this problem?Is the Enable level password is different from Solarwinds setting to the real-device? or is this a bug in solrwinds tool? Please correct me if i am wrong. TCTSL

Hi Superfly, Kindly give any example on this please. I couldn't able to correctly figure this out in Alert Manager. Regards, Velmurugan

Hi All, Did any one faced this kind of issue? TCTSL