superfly · Senior Network Engineer · ✭✭✭✭✭

So even when you do a show log on the device, you can't see any reference to a power supply going down? I've not heard of Cisco removing this functionality and I would expect show log would show a power failure error. But some "important" syslog messages (such as power) may only be logged as a syslog 4 so you'd have to set…

How is your connection profile configured? So when you press the Test button, I'm assuming it's failing for you. Once it fails, click on Show credential login details. It will show you what it was trying to do. It sounds like you just need to tweak the connection profile.

I added these in the same as other devices by just using the IP address and SNMP string.

Set the credentials in NPM. Once they are set there correctly, it will work fine in VNQM.

Thanks, yeah I'm looking for a list that will show me if they've been configured as unpluggable - not ones that are currently "unplugged". In the interface report, you can only do Full Name, Interface Type Description, Interface Type Name & Status which don't give me what I'm looking for. Thanks for the assistance!

Actually that is correct. It will trigger on new alerts it found but not on ones that have been triggered already.

No, reset condition is when the alert returns to normal. To do escalation go in to Trigger Actions and select your email trigger alert. In there you'll see the Alert Escalation tab. Fill it out as you see fit. But if you really want alerts on 95% , 96% etc you would need an alert for each threshold. But remember if you do…

Do you have NCM (Network Configuration Manager)?

Click the little arrow next to the node. Then select the greyed interface and select delete.

Did you try mesverrum​'s suggestion? If yes and you still don't see the interface you wish to delete, then I think you should delete the node and re-add it. But normally what has been suggested above is all you need to do. You should see the old interface but it will have a grey status circle. Post a screenshot of the…

No worries. I have 2 email alerts for our external site links. One for incoming, the other for outgoing. I basically monitor the link and alert if utilization is over 90% continously for 10 mins. And I reset the alert once the utilization falls below 50%. Hope you get what you're looking for.

I run TFTP server on my Solarwinds server as well but I do not get this popup. I run version 10.4.0.14 and it's setup as a service. So I do not have it in the startup group. I suspect that you do. If you want to keep it in the startup group, you could get it to start in minimized mode, that way you won't have to close the…

Cool. Just mark this question as Answered if you're happy with the answer

sturdyerde wrote: Ouch, sorry to hear that yours has gone so poorly. Do you suspect .NET 4.8 or something else? Not sure what the issue was. Everything seemed fine except for NCM no longer working on the APE's and my HTTP post email alert no longer worked.

hpstech wrote: Are you reverting back to previous backup or going to try and work through the issues? This is why I fear upgrading my larger environments. No we tried to get Solarwinds to fix the issue. They had 2 go's at it before he decided to rebuild one of the APE's. Every since then, that APE would no longer talk to…

You'd have to make your own. Take the data into an Excel spreadsheet, and then you can display it how you like.

schnarked wrote: Hi Superfly, Unfortunately you can't actually - here you can only configure: a) How long to keep uncompressed data for - default is 60 minutes, max = 240 minutes. This is the 1 minute data from what I understand Sorry didn't realise there was only a 4 hour limit in the options. Hopefully Andy's option will…

Yeah I'm aware of events but not all events trigger an alert. And yes you could get crafty and display some events but that still doesn't guarantee if an alert was generated. I think it would be handy to see historical alerts.

I guess in that case the server can still be contacted through WMI but pings are failing. However I think it would be extremely rare to have 100% packet loss and the node not be marked as down. I do have an alert for packet loss on all my WAN links. It will send an email if it detects packet loss over 10% for a continuous…

Is there a DBA available? You'll need a correct username and password.

Hi, your network team just needs to configure the device to send the syslogs to your Solarwinds syslog server. So if it's a Cisco device you use logging host x.x.x.x <- ip address of your Solarwinds syslog server logging traps notifications <- I use this level for syslogs but you can use a different level. Notifications is…

That's the way to do the alert so hopefully all will be right now for you.

If you can't access the Avaya using SNMP from NPM then you've got an issue somewhere. Either SNMP is not running on the Avaya correctly or there's a firewall or something like an access list in between the NPM and the Avaya.

This is very easy to achieve. Just open Syslog Viewer on your server. Then click on View and select Alerts/Filter Rules Then click on Add New Rule In the Message tab you can configure what to look for and in Alert Actions you just configure the Email option.

They must've still been accessible. That's the only way a node stays up. If it doesn't go red on the screen, it means Solarwinds can still see it. Do some testing with him to see if you can get to the bottom of it. Sounds to me that the VM wasn't in fact shut down or you're monitoring something else rather than the VM that…

You need to add in an extra filter to just report on the internet router traffic. Edit the report. Then click on the Edit button marked below. Then add in the extra filter to report on.

Sweeet! I"m still on 11.0.1 but within 2 months I'll be on 12. I just assumed it wasn't around as yet as the feature request is still active. Sorry my mistake.

Report writer has the following where you can change it but as you can see, it automatically changes it to Mbps (maybe that wasn't the case on previous versions) But you've shown "events" to which Report Writer has no bearing. I'm guessing you'll need to change it somewhere in the database. Log a ticket for it.

Then just try my suggestion for the email alert part. Is the trigger condition still set to Interface?

What version are you on? I'm on 2019.4 and it is still there.